Fragen & Antworten

Frage stellen 
Nadou fragte am 31.08.2010 um 14:41 Uhr

Was kann ich tun, damit das "Encodieren" des Films klappt

Diese Frage bezieht sich auf Video deluxe

Wenn ich brennen will, kommt die Meldung "Encodieren fehlgeschlagen".

Ich kann den Film nicht brennen. könnte ihr mir helfen ?

 

Anbei noch die Daten des PC's sowie das LOG-File :

 

> Product:    Video deluxe (Version: Video Deluxe 16 plus Sonderedition)
> OS:          Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
> CPU:        (1) AMD Athlon(tm) 64 Processor 3000+; 1998 MHz
> RAM:        1535 MB, 475724 KB free (31%)
> DirectX:    4.09.00.0904
> Graphic:    ASUS RADEON A9200SE on HP w2007 Wide LCD Monitor with 1280x768
> Sound:      (1) VIA AC\'97 Audio (WAVE)
> Browser:    Mozilla/5.0 (Windows; U; Windows NT 5.1; de; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8 (.NET CLR 3.5.30729)
> Firewall:   
> Mobile:     
> Registered: 
NONE

> Mein Problem :
Ich habe 2 verschiedene DVD's erstellt. beide kann ich
> korrekterweise auf dem PC anschauen. Ich wollte beide brennen doch als
es
> dem Ende zuging gab es mir, dass beim encodieren einen Fehler aufgetrten
> ist.

Untenstehend das LOG-File vielleicht kann es Ihnen mehr Infos dazu
> geben.

Das brennen geht nicht, ich habe es bei beiden DVD's versucht,
> doch beide male geht es nicht.

Koennen Sie mir da weiter helfen ? Ich
> braeuchte dies dringends bis am Donnerstag Abend auf DVD.

Herzlichen
> Dank fuer Ihre prompte Rueckmeldung.

Nadja

LOG-FILE :
>
------------------------- 29.08.2010 21:41:22
> --------------------------

29.08.2010 21:41:22.796:  DLLAV32.DLL
> loaded, all entry points available
29.08.2010 21:41:22.796:  AVSDK
> MsgCbFunc registered
29.08.2010 21:41:22.796:  AVSDK: StatCbFunc
> registered
29.08.2010 21:41:23.140:  AVSDK Version 9.0.193
29.08.2010
> 21:41:23.140:  ------------ Reading Device Info
> ----------------
29.08.2010 21:41:23.140:  AVSDK: 2 device(s)
> found
29.08.2010 21:41:23.140:  Adapter=1  ID=1  LUN=0  E:ATAPI iHAP322
>  9 Revision:6L1F
29.08.2010 21:41:23.156:  AVSDK: 1 record device(s)
> available
29.08.2010 21:41:23.156:  ------------ done
> ----------------
29.08.2010 21:41:23.562:  setting no speed
> limit
29.08.2010 21:41:23.578:  !!! DBK error in
> CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid
device
> !!!
29.08.2010 21:41:37.703:  Open Project: Flo_&_Danou -- dvd project
> 2010-08-29
29.08.2010 21:41:37.703:  VideoMode: PAL  Temp Dir:
> C:\Dokumente und Einstellungen\Bernhard\Eigene
> Dateien\MAGIX_Video_deluxe_16_Plus_Sonderedition\Disc
> Images\
29.08.2010 21:41:37.703:  dll version 4.4.4.6
29.08.2010
> 21:41:37.703:  PrepareDVDVideoFiles() - Abschaetzen des
> Splitpunktes
29.08.2010 21:41:37.703: 
> EstimateLayerSplitPoint()...
29.08.2010 21:41:37.718:  Splitpunkt
> 4271833088 auf Disk mit Groesse 1768128512
29.08.2010 21:41:37.718: 
> Title an Stelle 0, Laenge 131072, Typ 0
29.08.2010 21:41:37.718:  Title
> an Stelle 131072, Laenge 131072, Typ 0
29.08.2010 21:41:37.718:  Title an
> Stelle 262144, Laenge 1767866368, Typ 1
29.08.2010 21:41:37.718:  ...
> Split moeglich nach aktuellem Title, -> Abbruch
29.08.2010 21:41:37.718: 
> Step 1 of 6, Encodiere Film 1 ...
29.08.2010 22:39:41.921:  Step 1
> done
29.08.2010 22:39:41.921:  ERROR: PrepareDVDVideoFiles() failed with
> errNo 5 - encoding failed
29.08.2010 22:39:41.921:  !!! DBK error in
> BurnProject: 10 - movie encoding failed !!!

--------------------------
> 30.08.2010 07:14:05 --------------------------

30.08.2010 07:14:05.843:
>  DLLAV32.DLL loaded, all entry points available
30.08.2010 07:14:05.843: 
> AVSDK MsgCbFunc registered
30.08.2010 07:14:05.843:  AVSDK: StatCbFunc
> registered
30.08.2010 07:14:06.171:  AVSDK Version 9.0.193
30.08.2010
> 07:14:06.171:  ------------ Reading Device Info
> ----------------
30.08.2010 07:14:06.171:  AVSDK: 2 device(s)
> found
30.08.2010 07:14:06.171:  Adapter=1  ID=1  LUN=0  E:ATAPI iHAP322
>  9 Revision:6L1F
30.08.2010 07:14:06.171:  AVSDK: 1 record device(s)
> available
30.08.2010 07:14:06.171:  ------------ done
> ----------------
30.08.2010 07:14:06.484:  setting no speed
> limit
30.08.2010 07:14:06.484:  !!! DBK error in
> CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid
device
> !!!
30.08.2010 07:14:13.843:  Open Project: Flo_&_Danou_DVD_le_soir --
> dvd project 2010-08-30
30.08.2010 07:14:13.859:  VideoMode: PAL  Temp
> Dir: C:\Dokumente und Einstellungen\Bernhard\Eigene
> Dateien\MAGIX_Video_deluxe_16_Plus_Sonderedition\Disc
> Images\
30.08.2010 07:14:13.859:  dll version 4.4.4.6
30.08.2010
> 07:14:13.859:  PrepareDVDVideoFiles() - Abschaetzen des
> Splitpunktes
30.08.2010 07:14:13.859: 
> EstimateLayerSplitPoint()...
30.08.2010 07:14:13.859:  Splitpunkt
> 4271833088 auf Disk mit Groesse 1549697024
30.08.2010 07:14:13.859: 
> Title an Stelle 0, Laenge 131072, Typ 0
30.08.2010 07:14:13.859:  Title
> an Stelle 131072, Laenge 131072, Typ 0
30.08.2010 07:14:13.859:  Title an
> Stelle 262144, Laenge 1549434880, Typ 1
30.08.2010 07:14:13.859:  ...
> Split moeglich nach aktuellem Title, -> Abbruch
30.08.2010 07:14:13.859: 
> Step 1 of 6, Encodiere Film 1 ...
30.08.2010 07:55:23.609:  Step 1
> done
30.08.2010 07:55:23.609:  ERROR: PrepareDVDVideoFiles() failed with
> errNo 5 - encoding failed
30.08.2010 07:55:23.625:  !!! DBK error in
> BurnProject: 10 - movie encoding failed !!!
30.08.2010 18:14:59.109: 
> setting no speed limit
30.08.2010 18:15:05.187:  Open Project:
> Flo_&_Danou_DVD_le_soir -- dvd project 2010-08-30
30.08.2010 18:15:05.187:
>  VideoMode: PAL  Temp Dir: C:\Dokumente und
> Einstellungen\Bernhard\Eigene
> Dateien\MAGIX_Video_deluxe_16_Plus_Sonderedition\Disc
> Images\
30.08.2010 18:15:05.187:  dll version 4.4.4.6
30.08.2010
> 18:15:05.203:  PrepareDVDVideoFiles() - Abschaetzen des
> Splitpunktes
30.08.2010 18:15:05.203: 
> EstimateLayerSplitPoint()...
30.08.2010 18:15:05.203:  Splitpunkt
> 4271833088 auf Disk mit Groesse 1549697024
30.08.2010 18:15:05.203: 
> Title an Stelle 0, Laenge 131072, Typ 0
30.08.2010 18:15:05.203:  Title
> an Stelle 131072, Laenge 131072, Typ 0
30.08.2010 18:15:05.203:  Title an
> Stelle 262144, Laenge 1549434880, Typ 1
30.08.2010 18:15:05.203:  ...
> Split moeglich nach aktuellem Title, -> Abbruch
30.08.2010 18:17:19.734: 
> Step 1 of 6, Encodiere Film 1 ...
30.08.2010 18:17:19.734:  Step 1
> done
30.08.2010 18:17:19.734:  Step 2 of 6, Encodiere Filmmenue
> ...
30.08.2010 18:17:20.859:  Step 2 done
30.08.2010 18:17:20.859: 
> Step 3 of 6, Encodiere Kapitelmenue 1 ...
30.08.2010 18:17:20.859:  Step
> 3 done
30.08.2010 18:17:20.859:  ConvertMovie() - encoded file:
> C:\Dokumente und Einstellungen\Bernhard\Eigene
> Dateien\MAGIX_Video_deluxe_16_Plus_Sonderedition\Disc Images\DVD Image
> Flo_&_Danou_DVD_le_soir\VTS_01_1.VOB
30.08.2010 18:17:20.859:  Step 4 of
> 6, Disc Image wird erzeugt...
30.08.2010 18:18:06.750:  Step 4
> done
30.08.2010 18:18:09.656:  Step 5 of 6
30.08.2010 18:18:09.656: 
> Step 5 done
30.08.2010 18:18:09.671:  ------------
> InitializeBurningProcess Point ----------------
30.08.2010 18:18:09.734: 
> setting PoINT cache size to 16777216l
30.08.2010 18:18:09.734:  Used burn
> options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
30.08.2010
> 18:18:09.734:  Booktype: don't care
30.08.2010 18:18:09.750:  setting
> write speed to 11080000  bytes/sec
30.08.2010 18:18:09.750:  this equals
> 8.000000x DVD / 62.811794x CD Speed
30.08.2010 18:18:09.750: 
> ------------ done: succeeded ----------------
30.08.2010 18:18:09.750: 
> ------------ CreateAPIProject ----------------
30.08.2010 18:18:09.750: 
> Step 6 of 6
30.08.2010 18:18:09.750:  creating DVD project in prepfile
> mode...
30.08.2010 18:18:09.859:  create volume... OK
30.08.2010
> 18:18:09.859:  verify option OFF
30.08.2010 18:18:09.859:  adding file
> "C:\Dokumente und Einstellungen\Bernhard\Eigene
> Dateien\MAGIX_Video_deluxe_16_Plus_Sonderedition\Disc Images\DVD Image
> Flo_&_Danou_DVD_le_soir\VIDEO_TS.IFO"
30.08.2010 18:18:09.859:  adding
> file "C:\Dokumente und Einstellungen\Bernhard\Eigene
> Dateien\MAGIX_Video_deluxe_16_Plus_Sonderedition\Disc Images\DVD Image
> Flo_&_Danou_DVD_le_soir\VIDEO_TS.VOB"
30.08.2010 18:18:09.953:  adding
> file "C:\Dokumente und Einstellungen\Bernhard\Eigene
> Dateien\MAGIX_Video_deluxe_16_Plus_Sonderedition\Disc Images\DVD Image
> Flo_&_Danou_DVD_le_soir\VTS_01_1.VOB"
30.08.2010 18:18:09.953:  adding
> file "C:\Dokumente und Einstellungen\Bernhard\Eigene
> Dateien\MAGIX_Video_deluxe_16_Plus_Sonderedition\Disc Images\DVD Image
> Flo_&_Danou_DVD_le_soir\VTS_01_0.IFO"
30.08.2010 18:18:09.953:  Step 6
> done
30.08.2010 18:18:09.953:  ------------ done
> ----------------
30.08.2010 18:18:09.953:  ------------ BurnToDisc
> ----------------
30.08.2010 18:18:09.953:  Step 6 of 6
30.08.2010
> 18:18:09.953:  Used burn
> options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
30.08.2010
> 18:18:09.953:  Booktype: don't care
30.08.2010 18:18:09.953:  setting
> write speed to 11080000  bytes/sec
30.08.2010 18:18:09.953:  this equals
> 8.000000x DVD / 62.811794x CD Speed
30.08.2010 18:18:09.968:  Check on
> previously direct recorded session...OK
30.08.2010 18:18:09.968:  --
> Volume mounted --
30.08.2010 18:18:09.968:  -- Recording on "E: ATAPI
> iHAP322  9" --
30.08.2010 18:18:09.968:  -- Medium is "DVD-R"
> --
30.08.2010 18:18:09.968:  -- Manufacturer "RITEKF1" --
30.08.2010
> 18:18:09.984:  AVSDK Message - INFO: :Recording volume ...
30.08.2010
> 18:18:10.125:  AVSDK Status - Begin operation Recording 397712
> sectors/frames
30.08.2010 18:18:10.125:  AVSDK Message - INFO: :Recording
> -> writing data ...
30.08.2010 18:18:14.406:  wrote LeadIn, start
> DataCopy
30.08.2010 18:20:20.109:  writing leadout and closing
> disc
30.08.2010 18:20:54.062:  writing leadout and closing
> disc
30.08.2010 18:20:54.062:  AVSDK Status - End operation Recording
> 397712 sectors/frames
30.08.2010 18:20:54.062:  AVSDK Message - INFO:
> :Recording successfully completed
30.08.2010 18:20:55.125:  Step 6
> done
30.08.2010 18:20:55.125:  ------------ done
> ----------------
30.08.2010 18:25:24.671:  WM_DEVICECHANGE( VOLUMECHANGE
> ) for drive e:
30.08.2010 18:25:24.671:  DEVICE
> REMOVAL

-------------------------- 30.08.2010 18:30:55
> --------------------------

30.08.2010 18:30:55.687:  DLLAV32.DLL
> loaded, all entry points available
30.08.2010 18:30:55.687:  AVSDK
> MsgCbFunc registered
30.08.2010 18:30:55.687:  AVSDK: StatCbFunc
> registered
30.08.2010 18:30:55.921:  AVSDK Version 9.0.193
30.08.2010
> 18:30:55.921:  ------------ Reading Device Info
> ----------------
30.08.2010 18:30:55.921:  AVSDK: 2 device(s)
> found
30.08.2010 18:30:55.921:  Adapter=1  ID=1  LUN=0  E:ATAPI iHAP322
>  9 Revision:6L1F
30.08.2010 18:30:55.921:  AVSDK: 1 record device(s)
> available
30.08.2010 18:30:55.921:  ------------ done
> ----------------
30.08.2010 18:30:56.265:  setting no speed
> limit
30.08.2010 18:30:56.265:  !!! DBK error in
> CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid
device
> !!!
30.08.2010 18:31:05.000:  Open Project: Flo_&_Danou -- dvd project
> 2010-08-30
30.08.2010 18:31:05.000:  VideoMode: PAL  Temp Dir:
> C:\Dokumente und Einstellungen\Bernhard\Eigene
> Dateien\MAGIX_Video_deluxe_16_Plus_Sonderedition\Disc
> Images\
30.08.2010 18:31:05.000:  dll version 4.4.4.6
30.08.2010
> 18:31:05.015:  PrepareDVDVideoFiles() - Abschaetzen des
> Splitpunktes
30.08.2010 18:31:05.015: 
> EstimateLayerSplitPoint()...
30.08.2010 18:31:05.015:  Splitpunkt
> 4271833088 auf Disk mit Groesse 1768128512
30.08.2010 18:31:05.015: 
> Title an Stelle 0, Laenge 131072, Typ 0
30.08.2010 18:31:05.015:  Title
> an Stelle 131072, Laenge 131072, Typ 0
30.08.2010 18:31:05.015:  Title an
> Stelle 262144, Laenge 1767866368, Typ 1
30.08.2010 18:31:05.015:  ...
> Split moeglich nach aktuellem Title, -> Abbruch
30.08.2010 18:31:06.609: 
> Step 1 of 6, Encodiere Film 1 ...
30.08.2010 18:31:06.609:  Step 1
> done
30.08.2010 18:31:06.625:  Step 2 of 6, Encodiere Filmmenue
> ...
30.08.2010 18:31:07.343:  Step 2 done
30.08.2010 18:31:07.343: 
> Step 3 of 6, Encodiere Kapitelmenue 1 ...
30.08.2010 18:31:07.343:  Step
> 3 done
30.08.2010 18:31:07.359:  ConvertMovie() - encoded file:
> C:\Dokumente und Einstellungen\Bernhard\Eigene
> Dateien\MAGIX_Video_deluxe_16_Plus_Sonderedition\Disc Images\DVD Image
> Flo_&_Danou\VTS_01_1.VOB
30.08.2010 18:31:07.359:  Step 4 of 6, Disc
> Image wird erzeugt...
30.08.2010 18:31:52.265:  Step 4 done
30.08.2010
> 18:31:54.828:  Step 5 of 6
30.08.2010 18:31:54.828:  Step 5
> done
30.08.2010 18:31:54.828:  ------------ InitializeBurningProcess
> Point ----------------
30.08.2010 18:31:54.906:  setting PoINT cache size
> to 16777216l
30.08.2010 18:31:54.906:  Used burn
> options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
30.08.2010
> 18:31:54.906:  Booktype: don't care
30.08.2010 18:31:54.906:  setting
> write speed to 11080000  bytes/sec
30.08.2010 18:31:54.906:  this equals
> 8.000000x DVD / 62.811794x CD Speed
30.08.2010 18:31:54.906: 
> ------------ done: succeeded ----------------
30.08.2010 18:31:54.906: 
> ------------ CreateAPIProject ----------------
30.08.2010 18:31:54.906: 
> Step 6 of 6
30.08.2010 18:31:54.906:  creating DVD project in prepfile
> mode...
30.08.2010 18:31:55.187:  create volume... OK
30.08.2010
> 18:31:55.187:  verify option OFF
30.08.2010 18:31:55.187:  adding file
> "C:\Dokumente und Einstellungen\Bernhard\Eigene
> Dateien\MAGIX_Video_deluxe_16_Plus_Sonderedition\Disc Images\DVD Image
> Flo_&_Danou\VIDEO_TS.IFO"
30.08.2010 18:31:55.187:  adding file
> "C:\Dokumente und Einstellungen\Bernhard\Eigene
> Dateien\MAGIX_Video_deluxe_16_Plus_Sonderedition\Disc Images\DVD Image
> Flo_&_Danou\VIDEO_TS.VOB"
30.08.2010 18:31:55.312:  adding file
> "C:\Dokumente und Einstellungen\Bernhard\Eigene
> Dateien\MAGIX_Video_deluxe_16_Plus_Sonderedition\Disc Images\DVD Image
> Flo_&_Danou\VTS_01_1.VOB"
30.08.2010 18:31:55.312:  adding file
> "C:\Dokumente und Einstellungen\Bernhard\Eigene
> Dateien\MAGIX_Video_deluxe_16_Plus_Sonderedition\Disc Images\DVD Image
> Flo_&_Danou\VTS_01_0.IFO"
30.08.2010 18:31:55.312:  Step 6
> done
30.08.2010 18:31:55.312:  ------------ done
> ----------------
30.08.2010 18:31:55.312:  ------------ BurnToDisc
> ----------------
30.08.2010 18:31:55.312:  Step 6 of 6
30.08.2010
> 18:31:55.312:  Used burn
> options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
30.08.2010
> 18:31:55.328:  Booktype: don't care
30.08.2010 18:31:55.328:  setting
> write speed to 11080000  bytes/sec
30.08.2010 18:31:55.328:  this equals
> 8.000000x DVD / 62.811794x CD Speed
30.08.2010 18:31:55.328:  Check on
> previously direct recorded session...OK
30.08.2010 18:31:55.328:  --
> Volume mounted --
30.08.2010 18:31:55.328:  -- Recording on "E: ATAPI
> iHAP322  9" --
30.08.2010 18:31:55.328:  -- Medium is "DVD-R"
> --
30.08.2010 18:31:55.328:  -- Manufacturer "RITEKF1" --
30.08.2010
> 18:31:55.421:  AVSDK Message - INFO: :Recording volume ...
30.08.2010
> 18:31:55.484:  AVSDK Status - Begin operation Recording 437312
> sectors/frames
30.08.2010 18:31:55.484:  AVSDK Message - INFO: :Recording
> -> writing data ...
30.08.2010 18:32:03.281:  wrote LeadIn, start
> DataCopy
30.08.2010 18:34:12.140:  writing leadout and closing
> disc
30.08.2010 18:34:37.765:  writing leadout and closing
> disc
30.08.2010 18:34:37.765:  AVSDK Status - End operation Recording
> 437312 sectors/frames
30.08.2010 18:34:37.765:  AVSDK Message - INFO:
> :Recording successfully completed
30.08.2010 18:34:38.671:  Step 6
> done
30.08.2010 18:34:38.671:  ------------ done
> ----------------
30.08.2010 18:37:00.828:  WM_DEVICECHANGE( VOLUMECHANGE
> ) for drive e:
30.08.2010 18:37:00.828:  DEVICE REMOVAL
30.08.2010
> 19:10:46.125:  setting no speed limit
30.08.2010 19:10:54.781:  Open
> Project: Flo_&_Danou -- dvd project 2010-08-30
30.08.2010 19:10:54.781: 
> VideoMode: PAL  Temp Dir: C:\Dokumente und
> Einstellungen\Bernhard\Eigene
> Dateien\MAGIX_Video_deluxe_16_Plus_Sonderedition\Disc
> Images\
30.08.2010 19:10:54.781:  dll version 4.4.4.6
30.08.2010
> 19:10:54.781:  PrepareDVDVideoFiles() - Abschaetzen des
> Splitpunktes
30.08.2010 19:10:54.781: 
> EstimateLayerSplitPoint()...
30.08.2010 19:10:54.796:  Splitpunkt
> 4271833088 auf Disk mit Groesse 1768128512
30.08.2010 19:10:54.796: 
> Title an Stelle 0, Laenge 131072, Typ 0
30.08.2010 19:10:54.796:  Title
> an Stelle 131072, Laenge 131072, Typ 0
30.08.2010 19:10:54.796:  Title an
> Stelle 262144, Laenge 1767866368, Typ 1
30.08.2010 19:10:54.796:  ...
> Split moeglich nach aktuellem Title, -> Abbruch
30.08.2010 19:10:56.921: 
> Step 1 of 6, Encodiere Film 1 ...
30.08.2010 20:03:17.140:  Step 1
> done
30.08.2010 20:03:17.140:  ERROR: PrepareDVDVideoFiles() failed with
> errNo 5 - encoding failed
30.08.2010 20:03:17.140:  !!! DBK error in
> BurnProject: 10 - movie encoding failed !!!

Antworten (2)
Nadou antwortete am 31.08.2010 um 16:12 Uhr

Habe ich gemacht - habe das selbe dem Support gesendet aber noch keine Antwort erhalten, deshalb hab ich es hier drin gestellt :-) Aber danke schon mal für deine Rückmeldung.

 

Ja da habe ich mich wohl falsch ausgedrückt - das brennen geht wohl aber es brennt mir nicht die ganze DVD - ca. 15 Minuten des Schlusses fehlt mir und an der Stelle gibt es mir die Meldung "Encodieren fehlgeschlagen"-

 

Ja das bin ich auf alle verwenden. Was muss ich da sonst drücken ?

 

Ok dann werde ich das heute Abend nochmals anschauen.

 

Danke schon mal für deine Rückmeldung.

  Danke
 FredW antwortete am 31.08.2010 um 15:33 Uhr

@Nadou,

 

braeuchte dies dringends bis am Donnerstag Abend auf DVD.
 

Wir sind alle nur Anwender, wie du auch. Wenn es drängt und eilt, solltest Du den Support von Magix anrufen.

 

Das brennen geht nicht, ich habe es bei beiden DVD's versucht,
doch beide male geht es nicht.
 

Laut der Log-File stimmt diese Aussage nicht so ganz ...

 

Du hast mehrere Anläufe unternommen, deine DVD zu erstellen:

 

29.08.2010 21:41:37.718: Step 1 of 6, Encodiere Film 1 ...
29.08.2010 22:39:41.921: Step 1 done

29.08.2010 22:39:41.921: ERROR: PrepareDVDVideoFiles() failed with errNo 5 - encoding failed

 

d.h. das Encodieren hat ca. 58 Minuten gedauert und ist beim Filmmenü encodieren ausgestiegen. Danach hast Du das gleiche Projekt nochmals gestartet:

 

30.08.2010 18:17:19.734: Step 1 of 6, Encodiere Film 1 ...
30.08.2010 18:17:19.734: Step 1 done
30.08.2010 18:17:19.734: Step 2 of 6, Encodiere Filmmenue ...

 

Aber nun hätte das Encodieren nur Millisekunden gedauert, was definitiv nicht sein kann. Ich bin mir sicher, dass Du die Frage bei "alle verwenden, alle neu encodieren, ..." falsch beantwortet hast und auf "alle verwenden" gegangen bist. Den gleichen Fehler hast du gleich nochmals begangen:

 

30.08.2010 18:31:06.609: Step 1 of 6, Encodiere Film 1 ...
30.08.2010 18:31:06.609: Step 1 done
30.08.2010 18:31:06.625: Step 2 of 6, Encodiere Filmmenue ...

 

Auch hier dauerte das Encodieren nur Millisekunden ...

 

Wie der erste Versuch gezeigt hat, hast Du offensichtlich ein Problem in deinem Filmmenü. Dort stürzte der ersten Brennvorgang ab. Das ist dein eigemtliches Problem. Danach hast Du das Problem falsch bedient.

 

Gruß

FredW

  Danke
Ergebnisse pro Seite:10 | 20 | 50 | 100
1