-
Music MakerHier
Plug-ins not available when upgrading from mmm 2021 to 2024
@Paul-Tucker Hi, Watch this tutorial. It shows upgrading from one Music Maker to another, without purchasing another Edition, and getting everything that I am supposed to have. John CB
-
Music MakerHier
Previous Audio Error (still a problem)
@Riley-Coach Hi, Let's back up a little more. You say that you have "put a decent amount of money into" the program, but looking at the startup screen, you only have the free edition. If you purchased some Editions, they should show up on the startup screen unless you registered the program under a different email address. Your email address is your user name with Magix. You should only have one account. If you change your email address, Magix, like your bank, doesn't know that unless you tell them. Here is what I see. You can see all of my purchased and activated Editions since 2016. So, did you purchase Editions with one email address and then install Music Maker with a different one? Note that Premium Editions and other editions are not the program. The program is free. In the first image of your post at 3:05 pm, it shows that the program is trying to create an H0 file in the public Soundpools folder. This should not be happening. The temporary files, .H0 and .HDP should be created under your user Documents, Magix, which is where you project files go: C:....\Documents\MAGIX\Music Maker\AudioTemp Please post a screen shot of your Program Settings, Folders tab page. John CB
-
Music Makerle 30/05/2024
Music Maker just locks up & becomes un-responsive
@mongoose666 When you sent in your request, did you receive a ticket number by email right away? If not, check your spam box. John CB
-
Music Makerle 30/05/2024
Music Maker just locks up & becomes un-responsive
@mongoose666 Hi, Click on Support at the top of this forum. Select Audio, Music Maker, scroll to the bottom of the page (after having looked at all of the potential solutions, or not - the rest should be obvious. John CB
-
Vidéo deluxele 28/05/2024
Movie Studio 2025 Released
@Paul-Doyle Hi, Unless this is on a new computer or you had Platinum and now Suite or vice versa, then all of the content should still be there under: C:\Users\Public\Documents\MAGIX\Common\Videocontent....the program. If not, then in the program, go under Help, Install Extra Content. If everything shows as already downloaded, then...you have it. John CB
-
Music Makerle 28/05/2024
Music Maker just locks up & becomes un-responsive
@mongoose666 Hi, It wasn't clear to me that this was actually the solution. I have never had a problem like that with Music Maker. I have had the ini for one of the video programs go sour once over a dozen years. It would be good to know if it was the VST ini or the MM ini. John CB
-
Music Makerle 28/05/2024
Music Maker just locks up & becomes un-responsive
@mongoose666 Hi, It works fine here (32.1.0.18). Did you try to disable the text cursor indicator in the Windows accessibility settings as suggested? John CB
-
Vidéo deluxele 27/05/2024
Movie Studio 2025 Released
@CubeAce Hi Ray, I have the M-Audio M-Track, an older version of the current one. John CB
-
Vidéo deluxele 27/05/2024
Movie Studio 2025 Released
Hi Al, It’s the new 30 minutes to edit rule. John CB
-
Vidéo deluxele 27/05/2024
Movie Studio 2025 Released
@AAProds Hi Al, See my comments on VPX16 which has the same new features. As for the new recording dialogue, this is actually a new app that can be used as a Standalone. Note that there is an entry in Windows programs for Magix Capture. This means that you can do the recording - webcam, screen, audio without having MMS open. Of course the files won't be put on the timeline if you use the SAL. Looks cool but is impractical because, unless you are a rocket scientist, you'll never remember what those small, arcane icons actually are for. These are for access to the legacy interfaces and you can see what they are if you mouse-over the icons. Of course, they don't work if you are in the SAL. One nice feature of the new video capture is the ability to review and trim the file before completion. There are a few of problems: Video recording (webcam) - audio is 44.1 kHz instead of 48, no way to switch to mono/stereo if you use an interface card with one mic plugged in; Audio recording - file is MP3 instead of Wave, 44.1 kHz instead of 48, no way to switch to mono/stereo if you use an interface card with one mic plugged in; Screen recording - no audio capability. John CB
-
Vidéo Pro Xle 24/05/2024
Video Pro X16 - New Features and Bug Repairs
@johnebaker Hi John EB, I am getting strange results today. VPX did not like one or two of the screen recordings and I had to run them through Handbrake. My system does not like certain files and the drive goes to 100% for a while before coming back. As for webcam, today's recordings were very strange. Same project that I've been using for testing - 29.97fps. I got a couple at 24fps variable, then one at about 18fps, and the last one at about 15fps. I started a new project, restarted VPX, and the 2 recordings were at 15.03 and 15.02 fps. It could be that recording the screen somehow impacted webcam recording. I tried another screen recording and it came out as 30fps. I tried another webcam recording and it was still 15fps. Audio is always 44.1 kHz when it should be 48 kHz. I ran Magix Capture as a standalone and the webcam came out to be 24fps, variable. The difficult part will be trying to explain something to Magix. More later. John CB
-
Vidéo Pro Xle 23/05/2024
Purchased Magix Store audio (ogg) files not found
@now37 Hi, Sorry for not answering earlier. I have no idea about the crashing problem. Maybe open a separate thread. As for Producer Planet, log in here, same account as Magix as it is Magix. Go to My Products and all songs that you have purchased through the Store should be there for downloading, likely only ogg files. John CB
-
Vidéo Pro Xle 23/05/2024
Video Pro X16 - New Features and Bug Repairs
@Roberto-Goncalves Hi Roberto, No, I haven't raised a ticket yet. Just wanted to clarify things with the new recording screens first. Did you check your spam box for a reply? You should have at least received a ticket number right after opening the ticket. John CB
-
Vidéo Pro Xle 23/05/2024
Video Pro X16 - New Features and Bug Repairs
@johnebaker Hi John EB, That is the message that I got before. I noticed that I got the same message the first time today. If you have VPX on 2 screens, try F9 and selecting something that is on the other screen. This seems to work better. John CB
-
Vidéo deluxele 23/05/2024
Mise a jour ancienne licence
@LORENTE-JEAN Bonjour, Notez que la version 2025 va sortir d'ici une semaine. Pourquoi pas installer la version d'essai en attendant? John CB
-
Music Makerle 23/05/2024
uprade from 2024 to 2025
@Gregory-Frech Hi, Music Maker is free and has been for several years. Editions are not free and are not the program. For the 2025 Premium Edition, wait until it comes out, as it will likely cost less. John CB
-
Vidéo Pro Xle 22/05/2024
Project folder unnecessarily trims the clips
@profilaxagm Hi Gabriel, Once you have put the trimmed clip back on the timeline from the PTF, did you try dragging the right side of the clip out? Works for me. John CB
-
Vidéo Pro Xle 22/05/2024
Purchased Magix Store audio (ogg) files not found
@now37 Hi, The Store checks back with Magix to see if you have purchased the song. When you first load VPX, it takes a while to connect. You can see this by starting VPX with a new project and going immediately to the Audio tab. It won't be populated. Wait about 30 seconds until the files show up, then open your project and your songs will be there. This delay is somewhat annoying. Note that the downloaded audio files are mxcogg format, a Magix proprietary format that requires phoning home to validate them. If you want to avoid that, go to Producer Planet and download the ogg files, put them somewhere and use those instead of the ones under the Audio tab. In fact, it's a good idea to get them anyways, just for safe-keeping. John CB
-
Vidéo Pro Xle 22/05/2024
Video Pro X16 - New Features and Bug Repairs
@Bol @johnebaker And, screen recording now also works. Go figure. I had trouble with at least one recording that VPX didn't like. I had to run it through Handbrake. It had the following: GeneralComplete name : E:\Video\Magix Projects\Test projects\Test Video Recording\20240522_081424.mp4Format : MPEG-4Format profile : Base Media / Version 2Codec ID : mp42 (mp41/isom)File size : 27.1 MiBDuration : 12 s 305 msOverall bit rate mode : ConstantOverall bit rate : 18.5 Mb/sFrame rate : 30.000 FPSEncoded date : 2024-05-22 12:14:58 UTCTagged date : 2024-05-22 12:14:58 UTC VideoID : 1Format : AVCFormat/Info : Advanced Video CodecFormat profile : Main@L4Format settings : CABAC / 1 Ref FramesFormat settings, CABAC : YesFormat settings, Reference frames : 1 frameCodec ID : avc1Codec ID/Info : Advanced Video CodingDuration : 12 s 305 msBit rate mode : ConstantBit rate : 18.3 Mb/sWidth : 1 920 pixelsHeight : 1 080 pixelsDisplay aspect ratio : 16:9Frame rate mode : VariableFrame rate : 30.000 FPSMinimum frame rate : 29.986 FPSMaximum frame rate : 30.016 FPSColor space : YUVChroma subsampling : 4:2:0Bit depth : 8 bitsScan type : ProgressiveBits/(Pixel*Frame) : 0.295Stream size : 26.8 MiB (99%)Encoded date : 2024-05-22 12:14:58 UTCTagged date : 2024-05-22 12:14:58 UTCmdhd_Duration : 12305Codec configuration box : avcC AudioID : 2Format : AAC LCFormat/Info : Advanced Audio Codec Low ComplexityCodec ID : mp4a-40-2Duration : 12 s 191 msBit rate mode : ConstantBit rate : 192 kb/sChannel(s) : 2 channelsChannel layout : L RSampling rate : 44.1 kHzFrame rate : 43.066 FPS (1024 SPF)Compression mode : LossyStream size : 292 KiB (1%)Encoded date : 2024-05-22 12:14:58 UTCTagged date : 2024-05-22 12:14:58 UTCmdhd_Duration : 12191 The last one that I did had the following: GeneralComplete name : E:\Video\Magix Projects\Test projects\Test Video Recording\20240522_091249.mp4Format : MPEG-4Format profile : Base Media / Version 2Codec ID : mp42 (mp41/isom)File size : 36.2 MiBDuration : 16 s 945 msOverall bit rate mode : ConstantOverall bit rate : 17.9 Mb/sFrame rate : 29.970 FPSEncoded date : 2024-05-22 13:13:15 UTCTagged date : 2024-05-22 13:13:15 UTC VideoID : 1Format : AVCFormat/Info : Advanced Video CodecFormat profile : Main@L4Format settings : CABAC / 1 Ref FramesFormat settings, CABAC : YesFormat settings, Reference frames : 1 frameCodec ID : avc1Codec ID/Info : Advanced Video CodingDuration : 16 s 945 msBit rate mode : ConstantBit rate : 17.9 Mb/sWidth : 1 920 pixelsHeight : 1 080 pixelsDisplay aspect ratio : 16:9Frame rate mode : VariableFrame rate : 29.970 (29970/1000) FPSMinimum frame rate : 29.978 FPSMaximum frame rate : 30.008 FPSColor space : YUVChroma subsampling : 4:2:0Bit depth : 8 bitsScan type : ProgressiveBits/(Pixel*Frame) : 0.288Stream size : 35.8 MiB (99%)Encoded date : 2024-05-22 13:13:15 UTCTagged date : 2024-05-22 13:13:15 UTCmdhd_Duration : 16945Codec configuration box : avcC AudioID : 2Format : AAC LCFormat/Info : Advanced Audio Codec Low ComplexityCodec ID : mp4a-40-2Duration : 16 s 858 msBit rate mode : ConstantBit rate : 192 kb/sChannel(s) : 2 channelsChannel layout : L RSampling rate : 44.1 kHzFrame rate : 43.066 FPS (1024 SPF)Compression mode : LossyStream size : 404 KiB (1%)Encoded date : 2024-05-22 13:13:15 UTCTagged date : 2024-05-22 13:13:15 UTCmdhd_Duration : 16858 Why the difference? VPX16 asked if I wanted to change the parameters to 29.99 from 29.97 fps. I said no. Also, the default audio is 44.1 kHZ instead of 48 kHZ and there is no way to get mono recording. When I got out of VPX and tried to delete the copy of the difficult video that had been opened in VPX, it was locked by Magix QTM or something like that. Anyone know what that is? I closed it from the Task Manager as it didn't want to close by itself. John CB
-
Vidéo Pro Xle 22/05/2024
Video Pro X16 - New Features and Bug Repairs
@profilaxagm Hi, I confirmed the problem in your other thread. The PTF problem was fixed, but Magix broke the part that worked - putting trimmed clips from the timeline to the PTF and back - gives only 1 second. @johnebaker @Bol Hi, John EB, I presume that you get the same as I do - nothing shows up properly from webcam capture. Is this correct? Did you both test the screen capture part? I don't get anything to work but it does make empty mp4 files. Have either of you raised a ticket yet? EDIT: Wait a minute - the bloody thing just worked! I got my webcam capture. There was no updated, so what happened to fix this? Thanks, John CB
-
Vidéo Pro Xle 22/05/2024
Project folder unnecessarily trims the clips
@profilaxagm Hi, As per my long thread about VPX16, Magix fixed the problem with dragging trimmed clips from the Source Monitor (Media Pool) to the Project Temp Folder. Previously, the entry in the PTF would only be 1 second long when dragged or put on the timeline and I think that there was a problem with the start media. With VPX16, as you have found, they broke the part about adding a trimmed clip from the timeline to the PTF. They entry shows ok, with Media Start, Media End and Duration, but dragging or putting this back on the timeline makes it 1 second long only (playtime). Please raise a ticket with Magix, showing them the problem and indicating to please not break what they already fixed. I will do the same. Currently, the only way around this that I have found, is to look at the duration of the clip in the PTF and drag out right side of the clip on the timeline to match the duration. Annoying. John CB
-
Autres produitsle 22/05/2024
"Find similar photos" in Photo Manager Deluxe gives ludicrous results
@Andy-Trigg Hi, As pointed out, Photo Manager is now quite old and desperately needs an update and some bugs fixed. I have never been able to figure out what the "Find similar photos" - "find similar photos" feature actually is trying to do. It can't be doing image analysis as that would require a lot of power and some training as to what one is looking for. In the search screen, look at the options - search hard drives, database, Search for EXIF content. I suggest that you read the manual. Maybe you can figure out something that I can't see. The manual indicates "...find similar subjects." IDK what that means. The other options are tagging people (recognize faces) and this requires training the program. From the manual: A different way to catalogue pictures is by using FaceID, a development of the Fraunhofer Institute. FaceID recognizes faces on photos and gradually learns recurring faces using typical features, and these are then assigned to specific people. There is a problem with this. I already have people named under categories and they don't show up in the "persons" column of the interface - it's empty. Adding a new person with the same name will tell you that the person exists, but you can't select it. EDIT: This is what I mean. If I add the name, it tells me that it already exists. EDIT again: testing out the facial recognition, it seems that as you go through the photos in the above interface, it tries to id faces and suggest who is who. You accept and the category is added for that person. As far as I can tell, it does not go through folders by itself trying to find a person. It would have been nice if the manual was clear about what this actually does. As so on. I don't use Photo Manager for finding similar photos, mainly for cataloguing/categorizing and adding descriptions, and previewing photos, videos and audio files, and dragging them to a video editor. All in all, I don't think that there is anything (at a reasonable price) that comes close to what PM can actually do, or at least, I wasn't able to find one. There are many that do photos, but not video and audio files. An updated version would be appreciated. John CB
-
Samplitudele 16/05/2024
ProX 8 - unable to hear live mic track.
@Geoff-Milnes Hi Geoff, You may also want to sign up on the dedicated Samplitude/Sequoia forum as there is a wealth of information there, including feedback from Magix. John CB
-
Music Makerle 13/05/2024
I bought version MUSIC MAKER PREMUIM EDITION 2021
@guy-partin Hi, I presume that Premium Edition 2021 worked before, so there is no need to activate it again when you install Music Maker 2024. Just log in and you'll see that you already have Premium 2021. You will likely have some things to download under the Downloads window. To understand better, watch this: John CB
browj2
Hors connexion, Dernière connexion 03/06/2024, Membre depuis 23/04/2013