ich erhalte beim Brennen einer DVD unter Magix Fotos auf CD & DVD die Fehlermeldung "DBK error in Burn project 210 - drive not fully supported" - wer hat für dieses Problem eine Erklärung oder eine Lösung?
Hier das Logfile-Ende:
9.06.2010 00:06:54.368: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: off
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
19.06.2010 00:06:54.368: Booktype: don't care
19.06.2010 00:06:54.368: setting write speed to 5540000 bytes/sec
19.06.2010 00:06:54.368: this equals 4,000000x DVD / 31,405897x CD Speed
19.06.2010 00:06:54.431: Check on previously direct recorded session...OK
19.06.2010 00:06:54.431: -- Volume mounted --
19.06.2010 00:06:54.431: -- Recording on "E: HL-DT-ST BD-RE BH10LS30" --
19.06.2010 00:06:54.431: -- Medium is "DVD+RW" --
19.06.2010 00:06:54.431: -- Manufacturer "RITEK" --
19.06.2010 00:06:54.524: AVSDK Message - INFO: :Recording volume ...
19.06.2010 00:06:54.524: AVSDK Message - INFO: :Recording -> formatting disc to prepare recording ...
19.06.2010 00:06:54.836: AVSDK Status - Begin operation Recording 1497646 sectors/frames
19.06.2010 00:06:54.836: AVSDK Message - INFO: :Recording -> writing data ...
19.06.2010 00:06:54.836: AVSDK Message - ERROR: :Cannot seek to packet on disc -> Command aborted, possibly caused by a communication error between host adapter and drive or by a drive malfunction (SK/ASC/ASCQ 05/FF/00)
19.06.2010 00:06:54.852: AVSDK Message - ERROR: :Cannot register call-back function -> drive not ready
19.06.2010 00:06:55.289: AVSDK Status - End operation Recording 1497646 sectors/frames
19.06.2010 00:06:55.289: AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information
19.06.2010 00:06:55.289: !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 100 - drive not fully supported !!!
19.06.2010 00:06:55.289: Step 6 done
19.06.2010 00:06:55.289: !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 210 - drive not fully supported !!!
19.06.2010 00:06:55.289: ------------ done ----------------
19.06.2010 00:06:55.289: project burning failed
19.06.2010 00:06:55.304: !!! DBK error in CBurnDevSupport::BurnProject(): 210 - drive not fully supported !!!
19.06.2010 00:06:55.616: !!! DBK error in BurnProject: 210 - drive not fully supported !!!
Viele Grüße, MM
Hier das Logfile-Ende:
9.06.2010 00:06:54.368: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: off
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
19.06.2010 00:06:54.368: Booktype: don't care
19.06.2010 00:06:54.368: setting write speed to 5540000 bytes/sec
19.06.2010 00:06:54.368: this equals 4,000000x DVD / 31,405897x CD Speed
19.06.2010 00:06:54.431: Check on previously direct recorded session...OK
19.06.2010 00:06:54.431: -- Volume mounted --
19.06.2010 00:06:54.431: -- Recording on "E: HL-DT-ST BD-RE BH10LS30" --
19.06.2010 00:06:54.431: -- Medium is "DVD+RW" --
19.06.2010 00:06:54.431: -- Manufacturer "RITEK" --
19.06.2010 00:06:54.524: AVSDK Message - INFO: :Recording volume ...
19.06.2010 00:06:54.524: AVSDK Message - INFO: :Recording -> formatting disc to prepare recording ...
19.06.2010 00:06:54.836: AVSDK Status - Begin operation Recording 1497646 sectors/frames
19.06.2010 00:06:54.836: AVSDK Message - INFO: :Recording -> writing data ...
19.06.2010 00:06:54.836: AVSDK Message - ERROR: :Cannot seek to packet on disc -> Command aborted, possibly caused by a communication error between host adapter and drive or by a drive malfunction (SK/ASC/ASCQ 05/FF/00)
19.06.2010 00:06:54.852: AVSDK Message - ERROR: :Cannot register call-back function -> drive not ready
19.06.2010 00:06:55.289: AVSDK Status - End operation Recording 1497646 sectors/frames
19.06.2010 00:06:55.289: AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information
19.06.2010 00:06:55.289: !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 100 - drive not fully supported !!!
19.06.2010 00:06:55.289: Step 6 done
19.06.2010 00:06:55.289: !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 210 - drive not fully supported !!!
19.06.2010 00:06:55.289: ------------ done ----------------
19.06.2010 00:06:55.289: project burning failed
19.06.2010 00:06:55.304: !!! DBK error in CBurnDevSupport::BurnProject(): 210 - drive not fully supported !!!
19.06.2010 00:06:55.616: !!! DBK error in BurnProject: 210 - drive not fully supported !!!
Viele Grüße, MM