• Movie Studio

  One answer, on 2/27/2026

  [Closed] MPEG4 codec
  I have Magix Movie Edit Pro 14 and am confused as to which forum I should ask this question to..... MPEG4 will not add to timeline nor export. I purchased an activation code from Magix and it still won't work. Any suggestions please. Thank you
• Movie Studio

  32 answers, most recent on 4/2/2026

  RE: Export quality from RTX Ti3060 far inferior to UHD770
  @me_again @AAProds @johnebaker @vdl-user-v19 I'm not sure if my contribution is relevant or not as I'm still using MMS 2024 and VPX 14 but I'm not having any quality issues with hardware encoding at 4K or HD at any frame rate from 60 down to 25fps
• Video Pro X

  9 answers, most recent on 1/20/2026

  RE: No output option at 100fps for 4k-100fps video
  @tom_frank Hi. Exported frame rates from video editors is often not a limitation of the editor but the codec used for export does not support those frame rates. Some video editors do not use some available codecs that may do as they quite likely
• Movie Studio

  14 answers, most recent on 3/19/2026

  RE: Separating Audio Tracks Video deluxe 2026 premium
  @Tom-Essex Hi, I'm still not sure about what your problem is. Do you have multiple streams as indicated by @johnebaker? If so, it would have been helpful to have indicated that at the beginning as this is not something that most users have or do. If
• Movie Studio

  31 answers, most recent on 4/16/2026

  RE: Video deluxe 2026
  @AAProds Hi Al, Works for me. Remember, Magix reuses the same Video Content folders from one version to the other so as not to have to download and install the additional content for each version. There are 3 flavours - VPX, MEP Plus, MEP Premium,
• Movie Studio

  8 answers, most recent on 3/13/2026

  RE: I have Video Deluxe Plus (2026) :: But ProDAD Hide V2 not included??
  @Apollo89x First, can you show exactly where you have read online that the ProDAD Hide v2 is meant to be included in VdL Plus 2026? I ask this because, looking at this page I see "addons" mentioned only with the Premium and Ultimate variants. If you
• Movie Studio

  22 answers, most recent on 4/9/2026

  MS re-names every new import to the name of the last saved project!
  2 days ago I saved a project via Magix, to re-open & finish editing later.I finished this project yesterday | So exported the finished video | And then also deleted the "project" file off my computer.However when I import new video footage today
• Movie Studio

  2 answers, most recent on 2/19/2026

  RE: Activating the "Extra" (included) effects packages in Movie Studio 202
  Mental meltdown - it looks like I bought the "2025" version last Julty, so I'll see if upgrading to that will help.   Cheers,   Cliff   Edit for PS.   "Upgrading" to 2025 seems to have fixed my NewBlue woes. Howevere, proDAD seems to be anything but
• SOUND FORGE

  11 answers, most recent on 4/14/2026

  RE: Welcome window keeps popping up on startup
  Hello again, I followed the instructions and got to the correct prompt. I changed the value on "Force Single Instance Behavior" to 'TRUE'. However, the 'apply' button was not highlighted for me to enable it, only the 'OK' button. Any other ideas you
• Movie Studio

  16 answers, most recent on 2/25/2026

  RE: Can't get Red Text
  @KJS-LES Hi again Kami, I assume you mean that your account shows only MMS 2023 Platinum? If so, that is because it is the only Magix software you currently own, apparently. Your account will not show any potential upgrades (i.e. "new" versions).
• Movie Studio

  22 answers, most recent on 1/7/2026

  RE: Unable to capture audio during Screen Recording -Video Deluxe 2026 Plu
  @browj2 Too late to edit my post. John, I've just realised the middle button you mean. It's not the one I'm talking about - it doesn't take you to the window required. The method using the bottom row of buttons as above does. AndyW
• Video Pro X

  9 answers, most recent on 1/20/2026

  RE: No output option at 100fps for 4k-100fps video
  Thanks for that info. I'll have to see if that WMV file can be re-compiled back to an .mp4 clip at 100 fps with AVC or HEVC codec with a different video editor without much loss of detail of a 4K video. But I have to wonder why VPX is not setup to
• Movie Studio

  7 answers, most recent on 1/14/2026

  RE: [Closed] why does FABS.exe need to run
  @rolf-oosting Hi Please do not resurrect old topics, this one is over 12 years old. Magix, is the company, not a product name and is not BorisFX. BorisFX only purchased Samplitude, Sequoia, and Music Studio from Magix, and some of their plugin
• Movie Studio

  7 answers, most recent on 4/10/2026

  RE: cant download extra content
  Hi, I have just installed Video Deluxe 2026 Ultimate, but I only have the Premium edition. In 'About Magix Video Deluxe', it confirms that I have the Premium edition. I have redeemed the coupon code, but cannot find the Ultimate pack. I cannot find
• SOUND FORGE

  13 answers, most recent on 12/23/2025

  RE: Sound Forge Pro 18 - can't change bit depth to 32
  @David-Rees Hi I can replicate this using the steps you have given, however it does beg the question why are you doing this? Increasing the bit depth from 16 to 24, 32 or 64 bit does not gain anything in dynamic range or compensate for editing
• Movie Studio

  14 answers, most recent on 3/26/2026

  RE: Hardware Rendering
  @Carl-Johansson HI . . . . .  I hope some others that are starting out video creation will not purchase the top tier gaming system and then discover a less costly system is just as good . . . . I totally agree with that. The concern I have with
• Movie Studio

  8 answers, most recent on 3/13/2026

  RE: I have Video Deluxe Plus (2026) :: But ProDAD Hide V2 not included??
  It was via a Google Search (*the Ai info at the top indicated that the "Plus Version" of Magix includes ProDAD hide V2).However after having looked into it, I've discovered that Magix as a company have basically tried to mislead/fool people by
• Movie Studio

  One answer, on 2/12/2026

  RE: Can anyone recommend a decent Video Editing Software
  @David-Rosingana Welcome to the Magix user to user forums. Which Magix video editing product do you own? Magix Video Pro X will allow inter-frame line-up, your free hand; I'm guessing (because I have no experience of it) that Vegas Pro might do the
• Other products

  2 answers, most recent on 4/26/2026

  RE: Downgrade Magix Vegas Pro 23 to Magix Vegas Pro 22.
  Thank you for this thorough and very precise answer! I'll just have to be patient then! And yes, I think Magix can at least provide me with a key for VP22 to compensate for the broken version of VP23, and I heard about the driver issue. But I think
• Movie Studio

  5 answers, most recent on 4/18/2026

  RE: LOSS OF OF PLAY BACK BAR.
  I am using Magix Movie Studio 2024. I have recently changed to a new computer with Windows 11. But now using the Magix to create a video appears to slightly different.   The play bar has disappeared when I open the video. I need to do more edits,
• SOUND FORGE

  13 answers, most recent on 12/23/2025

  RE: Sound Forge Pro 18 - can't change bit depth to 32
  @David-Rees Does this problem happen with any WAV file? For example, if you create a new file and fill it with the noise generator, does changing the bit depth also cause the volume to deteriorate? If other files aren't effected, maybe it has
• Off topic

  158 answers, most recent on 5/23/2026

  RE: Magix support has not responded to support tickets for months
  Hi all as @emmrecs has mentioned, see below. For Vegas products support enquiries: Vegas Pro  - all versionsVegas Edit - all versionsVegas Post - all versionsVegas Movie Studio - up to version 17. Please either click on @emmrecs provided link or
• Movie Studio

  16 answers, most recent on 2/25/2026

  RE: Can't get Red Text
  I know this isn't the purpose of this forum, but I need to repeat my question about Movie Edit Pro versions that I see being referred to on this website. Some time ago, I tried the "Easy" version, but it wasn't enough for me. 😐 So, is there an MEP
• Photostory

  15 answers, most recent on 1/28/2026

  RE: 2026 Manual doesn't agree with program - Split Photostory, etc.
  Tonight I burned three storylines to the DVD+RW disk using the same blue grid menu as before and it played back on my BD player this time. Extremely slow burning, but it worked. Is there anyway to use a custom menu image background or edit an