• Movie Studio

  8 answers, most recent on 2/5/2026

  RE: Repeated glitch in burned disc
  @k9vet Thanks for the additional information. Two suggestions to help to diagnose the problem: The Burn process will first create a folder of files on your hard drive. What is the size of the contents of that folder? The actual maximum that an
• Movie Studio

  15 answers, most recent on 9/26/2025

  RE: MAGIX Video deluxe 2026-encoding failed
  The burn procedure is completed after about 30 minutes and a vob.file, 0.99 GB, has been created. Can the project's track 1 (the movie) and track 2 (titles), and perhaps the chapter markers, be saved and then imported into a new project?
• Movie Studio

  48 answers, most recent on 9/29/2025

  RE: Weird issue with using Smart Copy/Smart Render in MEP 2019 Premium
  @johnebaker @ericlnz @AAProds If I use the MainConcept encoder, I am able to change from 1080i to 1080p, and then it says it is planning to smart render all of the files, but when I actually start the process it immediately fails.   When
• Video Pro X

  45 answers, most recent on 6/6/2026

  RE: DVDs cut don't play
  Hi @johnebaker I am using MAGIX Video Pro X16 20.0.1.270 and AFIK following standard procedure for burning DVD. There is, I think, only a set set of steps to create a DVD with VPX16. Perhaps these give some insight.
• Video Pro X

  12 answers, most recent on 10/25/2025

  RE: ProX will not write to DVD DL discs
  @rickduley Hi. A DVD burner capable of burning Dual layer discs should have a DL emblem on the front loading draw. Ray.
• Photostory

  15 answers, most recent on 1/28/2026

  RE: 2026 Manual doesn't agree with program - Split Photostory, etc.
  The thumbnail distortion I posted above was caused by me changing my Windows 11, over riding the Properties-Compatibility-Change high DPI settings, setting it to Override - System Enhanced for this Photostory 2026. I did it because the burn screen
• Video Pro X

  45 answers, most recent on 6/6/2026

  RE: DVDs cut don't play
  I had one successful burn of a 4hr+ DVD video but when I try it again I get Here's that log file. Curiouser and curiouser!
• Movie Studio

  48 answers, most recent on 9/29/2025

  Weird issue with using Smart Copy/Smart Render in MEP 2019 Premium
  Hi, I have got some H.264 MP4 files that are encoded in 1920x1080 @ 25fps. I have placed these files onto the timeline, using separate projects (new movie) for each file. I have then accessed the burn menu, created a disc menu, and chosen Blu-ray to
• Movie Studio

  15 answers, most recent on 9/26/2025

  RE: MAGIX Video deluxe 2026-encoding failed
  ?Over the course of the year I have used four different editions of Magix Edit software and almost always finished the project by selecting "Burn-DVD-Encode in folder" and there selecting a VIDEO_TS folder that I created on the computer's hard
• Video Pro X

  12 answers, most recent on 10/25/2025

  RE: ProX will not write to DVD DL discs
  You're right @johnebaker, you have to have a really good look at the documentation but I purchased an Verbatim External Slimline Model DPAA burner which promised to burn DL discs. I still had to find software which will handle the job and I found
• Movie Studio

  4 answers, most recent on 9/17/2025

  How to create a Blu-ray Disc without fancy menus
  Hi all, I have Magix Movie Edit Pro, and when I go to the ‘Burn’ dialog I am looking to burn a movie/project to Blu-ray but without having any interactive menus… Is there a way to simply create the Blu-ray movie and have just a plain data disc-style
• Movie Studio

  16 answers, most recent on 9/5/2025

  RE: Blu-ray media created playback issue. Image bounces/jitters
  Hallo @calamar, When burning to a Blu-ray, the GPU acceleration of my NVIDIA card is also disabled. As far as I know, it's not supported when burning H.264. If I switch to the integrated Intel® UHD Graphics 630, the GPU acceleration isn't
• Movie Studio

  15 answers, most recent on 9/26/2025

  RE: MAGIX Video deluxe 2026-encoding failed
  @AAProds Hi Al, the files for DVD burns aren't arranged in a VIDEO_TS folder, they are just plopped in a folder of the project's name. I agree! That's what I meant when I wrote about VdL automatically creating a folder...  Jeff
• Video Pro X

  45 answers, most recent on 6/6/2026

  RE: DVDs cut don't play
  I just remembered. Here are a couple of log files of failed burns. https://1drv.ms/u/c/bb228147f3dd175d/IQD1e3Hw8s0QS629BqhsF15-AXLi-xhGOz8war7Id3NSokA?e=RF46uY Hope they help.
• Movie Studio

  22 answers, most recent on 10/11/2025

  RE: Serial Number Problem with Video Deluxe2026 Trial
  @GeeGee Internal DVD and Blu-ray drives still exist to but but whether you can get one on a new prebuilt machine, I doubt. You could add an external USB one instead. Any Blu-ray burner should also be able to burn DVDs and CDs. You can still get
• Movie Studio

  11 answers, most recent on 3/22/2026

  RE: Cleaning a really poor quality video
  @johnebaker Here you go, John. Very slow on my laptop so I eventually commented-out the LSFMOD sharpener and used the sharpener in Neat Video in VDL 2026 (for another version; I imported it as a MagicYUV AVI). This one just used the last video Andy
• Movie Studio

  16 answers, most recent on 9/5/2025

  RE: Blu-ray media created playback issue. Image bounces/jitters
  @calamar Hi The change (reduction) of frame rate is the most likely cause of the jitters. Try the following: Change the project settings to 1920 x 1080 50fps, the 50 fps helps with conversion of progressive video to Interlaced. In the Burn dialogue
• Movie Studio

  48 answers, most recent on 9/29/2025

  RE: Weird issue with using Smart Copy/Smart Render in MEP 2019 Premium
  @jak.willis When attempting to burn to a Blu-ray Disc, I have noticed that the audio export setting is locked to AC3...but the audio of the source files is AAC... Unless things have changed recently AAC audio is not part of the Blu-ray/DVD specs,
• Movie Studio

  48 answers, most recent on 9/29/2025

  RE: Weird issue with using Smart Copy/Smart Render in MEP 2019 Premium
  @jak.willis Jak, yes, as I said, interesting. To put it more bluntly, MEP2019 is 6 versions old. It may have been a bug then. The latest version doesn't behave like MEP 2019; it doesn't say it will but then doesn't. Contrary to my comment
• Rescue Your Videotapes!

  2 answers, most recent on 6/15/2025

  Problem to add projects to the DVD menu.
  MAGIX Video easy Video SaverVersion 7.0.1.12 (UDP3) Windows 11   Hi I have problem to add project to the DVD menu, when i am about to burn the movies to a DVD   The first project is loaded as usual in the start. => "Finish movie" => "burn to
• Movie Studio

  15 answers, most recent on 9/26/2025

  RE: MAGIX Video deluxe 2026-encoding failed
  Thanks for all the comments. I wonder what's going on here though. After four attempts it has failed and a vob.file (0.99 GB) has been created each time and contains the first 22 minutes of the movie. Then I chose the option to export the file as an
• Photostory

  6 answers, most recent on 8/24/2025

  RE: "Sound Optimization", disappearing transitions, transition/music issue
  Jeff, Glad to follow up. The "Sound Optimization" popup seems to have disappeared on its own... I'm crossing my fingers. But one issue buried with the others was not resolved: The Object Mode selection change you recommended did fix the soundtrack
• Rescue Your Videotapes!

  2 answers, most recent on 6/15/2025

  RE: Problem to add projects to the DVD menu.
  @Pierre_S Is it possible to burn more than one video , or even at all? Using Video Saver, or its more recent incarnation, Rescue Your Videotapes, I'm afraid the answer is No, sorry. To make a DVD with multiple movies you need one of the more
• Movie Studio

  48 answers, most recent on 9/29/2025

  RE: Weird issue with using Smart Copy/Smart Render in MEP 2019 Premium
  @AAProds Hi Al, . . . . "Smart Copy successful." . . . The full line is 'Export with Smart copy successful' The text in the results box tells you what it determined what it needs to do and did, in both it is 'render' How long was the movie, and the