• Movie Studio

  3 answers, most recent on 6/24/2025

  RE: [Solved] Audio noise
  @Brian-Lee Hi and welcome to the user to user forums. Assuming your problem is not being made by clipping the signal, try going into the program settings and increase the audio buffers by two and see if things improve. If they improve but only
• Movie Studio

  32 answers, most recent on 4/2/2026

  RE: Export quality from RTX Ti3060 far inferior to UHD770
  @AAProds Hi Al The issue with the different end times is due to the MP3 audio being timing is frame based, frame has a fixed number of samples, 1152 per frame and if the sample rate is 44.1kHz, the audio frames are marginally out of sync and run
• Video Pro X

  9 answers, most recent on 4/20/2026

  RE: 360 File from DJI OSV
  @johnebaker Oh John, all that's above my paygrade, but I got them from here (the GD link): https://www.reddit.com/r/djiosmo360/comments/1mg6wl1/osmo_360_sample_original_files_videos8k50p30p/ 👍
• ACID

  One answer, on 7/20/2024

  RE: [Solved] Vita Power Guitar Plugin
  @Archit-Agarwal Vita Power Guitar only has power chords, not individual notes. If you have the suite version of Acid Pro you can check out Vita Century Guitar for additional guitar samples. Also, the power chords and single guitar note samples of
• SOUND FORGE

  11 answers, most recent on 5/10/2025

  RE: SF 18 Pro Trial Crashing
  In the internal preferences I tried changing the engine and mixer sample rate to 48kHz and 24 bit, to match my samples and the specs my audio interface is running. This time I got four markers down before it crashed. Tried using my Onyx 8 instead,
• Music Maker

  16 answers, most recent on 1/12/2026

  RE: Midi keyboard not playing live
  @Alex-Kirkwood The lower the buffer the more likely you'll hear clicks and pops due to lost samples. You can get an ASIO capable external USB audio interface which takes over the audio processing from the CPU. This is recommended for music
• Music Maker

  3 answers, most recent on 9/22/2024

  RE: [Solved] How to import VOICE audio file, without it being affected by BPM?
  @Film.Maker Hi, Try this. In the Program Settings, Import tab, uncheck "Automatically adjust samples to BPM" or check "For patched samples only." John CB Thanks for the info. :) If I disable Auto-Adjust, then all M:MM soundpools don't adjust, so
• SOUND FORGE

  6 answers, most recent on 10/1/2025

  RE: Vinyl record and restore
  This is first use of new purchase/installation. This is a sample. Within the tool, the save process just hangs.
• SOUND FORGE

  3 answers, most recent on 1/20/2026

  [Solved] Clicks and pops playing audio and audio exported in Sound Forge 17
  Hello Im using SF17 importing mp3 (the audio is clean of clicks and gaps). When I play imported audio, I hear clicks, skips, and interruptions aleatories in the sound. If I export the audio it contains cliks and skips. I use a Fireface 800 128
• Music Maker

  2 answers, most recent on 5/13/2024

  RE: [Solved] I have the same problem with every project I open and play
  @JobyJob-Mo Navigate to File > Settings > Program Settings > Audio/MIDI. Select an ASIO driver, for example the Music Maker ASIO driver. Click on the Advanced button next to the driver selection to open the ASIO driver settings. Select your
• Samplitude

  3 answers, most recent on 5/11/2025

  RE: Vita Cello out of tune
  @psychojosh13 Could be that some samples themselves are slightly out of tune because they were recorded that way. Usually, each pitch has multiple samples (maybe 3 or 4) which alternate between each key press to prevent a machine gun effect. If one
• SOUND FORGE

  16 answers, most recent on 3/28/2025

  RE: slow down on exported music
  @mark-p8189 You can usually unlock the sample rate by closing all programs that access the sound card. If only one application accesses the sound card, it can set the sample rate freely. Depends on the sound card itself. If you don't know which
• Movie Studio

  16 answers, most recent on 12/23/2025

  RE: No video only sound
  @me_again Hi Andy, The 32kHz Audio Sample Rate should not be a problem but, as @Marc-Goder and @johnebaker have pointed out, the fact that @Odd-Aagesen has a computer with a Snapdragon CPU is very much the issue here. Jeff
• Movie Studio

  2 answers, most recent on 11/29/2025

  RE: Audio conversion math errors?
  @Karl-Diez Hi In addition to @browj2 's comment, I would advise you not to use mp3 for video editing where there is a need for synchronisation to the video. MP3's are a compressed 'final product' audio format and suffer from going out of sync when
• SOUND FORGE

  One answer, on 5/16/2024

  RE: [Solved] Sound Forge presents noise-click during editing and rendering.
  @Paulo-Coluti Are you editing compressed audio files? Please convert them first to WAV or enable the option to always proxy compressed audio files in the program preferences. Next, please make sure you cut audio files only at zero crossings to
• Movie Studio

  32 answers, most recent on 4/2/2026

  RE: Export quality from RTX Ti3060 far inferior to UHD770
  @AAProds Hi Al Thanks for the sample file. I have tried various combinations of framerate and GOP length and see no difference between the original and the RTX exports, perhaps the movement is not fast enough. The problem is seen very clearly in
• Music Maker

  One answer, on 11/2/2024

  Bpm not matching up when using my own samples not the soundpools
  Why isn't magix music maker like acid studio when it comes to using your own samples in acid my samples bpm automatically match up bu mmm24 doesn't do that unless you buy there soundpools
• Music Maker

  8 answers, most recent on 5/27/2024

  RE: [Solved] The program gets stuck while recording audio
  @V-S I would guess it should work fine without registration. You now need to select the ASIO driver for your AudioBOX Usb96 under the Audio/MIDI tab in the Music Maker program settings. Click on the Advanced button to open the ASIO driver settings.
• Music Maker

  3 answers, most recent on 10/2/2024

  i use my own samples but when i use them they never sync up
  why dont my samples i own sync up like i have acid music and the bpm automatically sync to the sample im playing
• Audio Cleaning Lab

  14 answers, most recent on 1/27/2025

  RE: "Import for file type 101 is not possible" errors
  Trying to get to grips with Audio Cleaning Lab 4 coming from CoolEdit Pro 2.1 (yes, THAT old) I am coming across the same problems as the OP.FWIW I get the "Error while writing noise sample file" when trying to change the "Noise Sample" using the
• SOUND FORGE

  16 answers, most recent on 3/28/2025

  RE: slow down on exported music
  The bit rate should have no affect on the speed/pitch. It can affect the overall quality though. Lossy files with an very low bit rate will often have a flanged garbled type soundAn MP3 encoded at a sample rate of 44.1kHz should playback the same,
• Music Maker

  16 answers, most recent on 1/12/2026

  RE: Midi keyboard not playing live
  @Alex-Kirkwood You have a Focusrite Scarlett interface? That should be enough. You select the Focusrite ASIO driver in the Music Maker audio settings and set the ASIO buffer size to reasonable value, for example 512 samples. Connect your speakers or
• SOUND FORGE

  38 answers, most recent on 9/16/2025

  RE: MP3 conversion glitches
  @Paul-Fegan In our experience it's not a good idea to edit MP3 files. They are already lossy compressed, this means they are missing data compared to the original WAV files, and they are read out in frames of data instead of individual samples,
• Samplitude

  4 answers, most recent on 1/11/2025

  RE: Can get Samplitude to record in 96kHz
  @Jim-Roshelli Has the project the same sample rate?