• Movie Studio

  One answer, on 1/6/2013

  RE: Evening out the sound levels across multiple scenes in a video
  geo234, Sorry I'm not much of an audio tech, but I don't think there is anything in MEP to auto adjust clips to the same level. After all, what if you do have genuinely quiet clips and very loud ones in you mix? Only suggestion is to try
• Movie Studio

  29 answers, most recent on 1/5/2013

  RE: New to Magix
  If you go to the you tube video I did for Special Olympics TX. At time segment 40 to 1:05 I do titles, PIP in 2 locations and fad in out out on 3 segments (as I call them). If MEP can handle these items, then cool. As I try to do better with each
• Music Maker

  4 answers, most recent on 11/25/2012

  is there software that will help level my mix
  so all the intruments are comeing out at a unified volume, i try turning my volume as soft as it gets and leveling it out that way, you can see what instrument is standing ouit too loud ..maybe there is a software tool that helps you do  this?
• Movie Studio

  8 answers, most recent on 11/21/2012

  How do you display track curves on video track?
  I've seen you can have those wave forms displayed on audio track and then I like to adjust the volume track in the middle of the audio track in case I want to voice over so that the music isn't loud. But if I want to display the tracks for a video
• Movie Studio

  3 answers, most recent on 11/16/2012

  RE: MULTICAM EDITING WHERE ONE CAMERA HAS BEEN SWITCHED ON AND OFF
  The trick for aligning multicam recordings is to use the graphical representation of the audio track as a visual clue to "line up" the two (or more) simultaneous recordings.  (I think you have a setting where MEP lines up the footage according to
• Music Maker

  4 answers, most recent on 10/18/2012

  Soundpool too loud
  Is there a volume control for autoplay auditioning Soundpool clips?
• Music Maker

  5 answers, most recent on 10/13/2012

  RE: Music Maker versions and functionalities
  Hi Both Procyon and George are correct, however I have alarm bells ringing (not too loud ) My concern is if the notebook is powerful enough and has enough memory to cope with the software.  What is the make, model and specification of the
• Movie Studio

  11 answers, most recent on 10/2/2012

  RE: Where is the "Multicam: Master audio track" selection? See .pdf excerpt below
  Thank you Jeff, I had to ask because I once got caught thinking that I could use "multi-cam" to mix two video sources and of course it was a disaster. So, listen to the audio track from both cameras pick the best one and choose that as your
• Movie Studio

  5 answers, most recent on 9/8/2012

  Audio Level
  Hello friends,  Now I have a question that actually deals with the audio. Setting audio is really a pain and sad thing for me at times. When I finish the project with varous effects and titles I watch it in my LED. But sadly here the sound is
• Music Maker

  2 answers, most recent on 8/1/2012

  Cannot record at different volumes
  Hi. I unplugged the mic & after plugging it in, Magix only records at a very low base volume no matter how loud I record. Basically, I could shout into the microphone, & the volume would still just be a flat, low line. I've adjusted all
• Audio Cleaning Lab

  No answers, created on 7/21/2012

  hard t
  I get a loud spike when the speaker says a hard t  
• Video Pro X

  3 answers, most recent on 6/29/2012

  RE: How to display full-phase waveform of audio track??
  Hi Jeremy. Sorry to be late replying, I've only just seen your updated message. In VPX3 (and still the case in MEP MX) the graphical representation of the waveform is "built around" the centre-line.  That "line" represents (in theory) a sound
• Video Pro X

  3 answers, most recent on 6/29/2012

  RE: How to display full-phase waveform of audio track??
  First, have you "separated" the graphic representation of the waveform from the video object, i.e are they on separate tracks?  (Shortcut Ctrl+H.)  And chosen to display the waveform? If so, what you now see IS different to how it is presented
• Music Maker

  2 answers, most recent on 7/4/2012

  RE: Please Help!! Recording vocals increases volume of other tracks???!!!
  That's because your vocal track is not only recording the vocals but the backing track(s) as well.  When they are played back, you are playing two instances of the backing tracks, so they sound twice as loud as they should. Unfortunately, I
• Movie Studio

  2 answers, most recent on 6/3/2012

  RE: How do I maintain a uniform audio volume or the same volume for all the audio objects in a track so that my viewers need not run around for remote to increase or decrease the volume when they see my videos?
  Hi Right click each audio object and select Normalize - this will bring up the levels of the 'quieter' audio and decrease the levels of the 'loud' audio. To control the overall audio level select the Mixer (M key) and set the master to  -6db,
• Movie Studio

  4 answers, most recent on 5/24/2012

  RE: Sound Advice
  Hi, Many people try to get their audio tracks to peak at  -2 dbfs, some even try to peak at 0 dbfs because they want to have a “loud” sounding audio track and try to minimize “noise”.  This may work sometimes but more often it creates an audio
• Music Maker

  One answer, on 5/22/2012

  Problem with soundpool
  Under my soundpool i have following:   HipHop Vol 13 HipHop Vol 13   and also Rock Alternative Vol 4 Rock Alternative Vol 4     WHY IS THAT????  If i click om "Straight N loud" it says that its been deleted or moved and cannot
• Movie Studio

  7 answers, most recent on 5/29/2012

  RE: Altering non-uniform sound levels inside an imported video WAV file
  Hmm, interesting problem! I assume that each "section" of the video is a separate object on the time line?  If not, and there is just one continuous object this is somewhat easier.  Highlight the audio track and right-click on it, select Show
• Movie Studio

  4 answers, most recent on 5/24/2012

  RE: Sound Advice
  Hi When you have finished editting the project - open the mixer (M key) and set the master volume level to -6db - this should eliminate the 'over loud' audio.  If this is too low set the master level to -3db. HTH John
• Off topic

  6 answers, most recent on 5/6/2012

  RE: How to reduce noise ?
  I am sure that i can do that with Samplitude, but i prefer Linux, and software uder free licence. I am sure also that problem is not in SW, problem must be in some setup for audio card, because when i change from desktop to laptop, at laptop i
• Rescue Your Videotapes!

  4 answers, most recent on 4/14/2012

  RE: why cant i lay down an audio or music track on a captured video
  the peak meters only moved on the microphone, all i get on the music is a loud hissing sound
• Rescue Your Videotapes!

  4 answers, most recent on 4/14/2012

  RE: why cant i lay down an audio or music track on a captured video
  Hi John, I can see the led display moving when i talk on the audio therefore i believe that the system is hearing me but not recording. The music on the other hand was a recording which i imported to try out and all i get is loud hissing. Any
• Movie Studio

  5 answers, most recent on 4/12/2012

  RE: Audacity
  I will take a look at it... eventually, but; I rarely use the integrated noise reduction in Movie Edit Pro, mainly because I rarely use the audio from any of my cameras. My audio recordings (voice) are using a external stereo microphone (Olympus
• Off topic

  2 answers, most recent on 3/19/2012

  RE: How to improve the sound of a cassette tape conversion to MP3 sound file using MAGIX?
  Ok, here is how I use this software. I have my connection from my stereo receiver going into the LINE-IN (blue port) [NOTE: it must be the line in port or your recording will be very distorted. Many people want to use the microphone port, but