• Movie Studio

  14 answers, most recent on 12/11/2023

  RE: creating panoramas
  @joserobles1941 @johnebaker @Former user @browj2 I don't know how Magix does its stitching of images but I've found a 10% overlap to be sufficient. It is taking care to get the height of each one correct and not adjusting focal length, aperture, or
• Rescue Your Videotapes!

  6 answers, most recent on 1/18/2023

  RE: Video Saver, how to Turn OFF Video AGC?
  @Steve-Mahrer Steve, out of interest, the Panasonic ES-15 I use as a cheap-charlie TBC raises the whites too much also. I used a variable attenuator on its input to try and drop levels…. What actual device are you using as an attenuator? It might be
• Video Pro X

  31 answers, most recent on 1/19/2024

  RE: Video Pro X12 - Newblue Elements not working/registered?
  I'd probably agree with the DRM principle if it did, in fact, work. But let's not go too far down that rabbit hole :) I've created a new video based on the one I'm trying to do for this charity. There are limits on making some of the people in the
• Movie Studio

  21 answers, most recent on 2/7/2023

  RE: MEP 2016 Copying Attributes To Other Clips?
  Hi Ray "Other clips can be on other tracks" Yes of course 🙂 Again the issue was that I should have separeted captures according to topics (I usually do), and just drag each clip into the main project timeline. "The mixer could have been used" Did
• Movie Studio

  32 answers, most recent on 1/28/2023

  RE: Plug In's For MEP2016 Plus
  Hello John - Ray (nice to see you guys again) MEP 2016 does offer some presets including 16mm, (exactly where John described them), thank you. However they are 'presets' and although very handy, they don't offer variability/parameter of grain,
• Movie Studio

  12 answers, most recent on 11/13/2022

  RE: Exporting Objects
  @browj2 So, only 1 object on the timeline? John, no, not necessarily. Cut, cut, you're left with the main object in the middle. The other reason a quick-select range would be handy would be for the use of the "/" function to quick repeat-play an
• Movie Studio

  19 answers, most recent on 11/28/2022

  RE: Can Not Export 4k or Higher Video in Portrait + MPEG-4 Issues
  I actually think the advent of the good camera phone has been an absolute godsend for capturing those precious moments that you would have lost if not having a video camera handy. The video (and stabilisation) on my Galaxy S21 is absolutely stunning
• Video Pro X

  12 answers, most recent on 3/9/2024

  RE: Copy Multiple Objects from Another Project & Retain Relative Position?
  @Galaxy Hi, PTF = Project Temp Folder (see above and the fourth image). This is the name that Magix uses in the manual, but the name of the window is Project Folder. This is not the same as your project folder. The PTF is a bin within the project
• Movie Studio

  18 answers, most recent on 11/30/2024

  RE: MPEG-4 codec problem
  I have Windows 10 and mainly I use HD video clips (Gopro 8, handy and my Panasonic video camera clips). Until last thursday everything was fine, but saturday nothing works. I have tried everything I know, but no?!?
• Movie Studio

  4 answers, most recent on 12/23/2022

  RE: Keeps freezing
  You have a much better system than I do (see signature) and I do not get any freezing with Movie Studio 2023 (Ver:22.03.167)While running Movie Studio, what is the temperature of your GPU and CPU? Have you confirmed all of your fans are running?What
• Video Pro X

  31 answers, most recent on 1/19/2024

  RE: Video Pro X12 - Newblue Elements not working/registered?
  @Clifford-Bowman Hi Cliff. I did say to turn anything within the NB effect that has Bur attached to the slider control to off. And I, for my part, completely ignored that advice. Mea culpa. I'll learn, eventually. There was indeed a "Motion Blur"
• SOUND FORGE

  24 answers, most recent on 12/15/2022

  RE: Sound Forge display font
  @rraud: Yessir, doing all the above is my standard when reinstalling apps for troubleshooting purposes. I have a ticket in with Magix support, but just out of sheer curiosity I might try to ID the font I'm seeing, and try the ancient work-around I
• Movie Studio

  31 answers, most recent on 12/5/2022

  RE: Finished video does not fit on screen
  @browj2 Way back when I was learning MEP and Camera/Zoom Shot, the instructions called for going from one section to another - still do. Well, then obviously I had to create a section using Section. Of course, that is completely wrong and entirely
• Video Pro X

  18 answers, most recent on 8/26/2022

  RE: Can resolution be improved on this short nighttime video?
  @lauriemessage I would think both Laurie as one or two here are very handy at converting files and not losing quality in the conversion but others may just want to try the converted file. It may be a few hours though before some members try as it's
• Music Maker

  21 answers, most recent on 4/18/2024

  RE: Premium version crashes and reverts back to Free edition during edits
  Hi Wolfie-R, I was just browsing the community and seen your post I also wondered if your problems have gone away. If not, make all necessary backups and then uninstall Magix Music Maker and the any installer you have on oyur pc. Then wait for 24
• SOUND FORGE

  4 answers, most recent on 12/3/2022

  Sound Forge Audio Studio 16 - Ability to seek while mastering
  Hi all,I upgraded my system (PC) a month ago and literally through that whole time I've been trying to find a simple, high quality wave editor for performing a final master on files. It will be used for 'official' masters so it needs to have a high
• Movie Studio

  18 answers, most recent on 11/30/2024

  RE: MPEG-4 codec problem
  @MattiT Hi . . . . Windows 10 . . . . For the activation failing there are 2 possible causes: An update to your Antivirus has blocked the program from enabling the codec to be activated - try temporarily turning off the Antivirus program while
• Movie Studio

  34 answers, most recent on 12/4/2022

  RE: What is most important to have in a video editing PC build using Magix
  @CubeAce I'm an over thinker, I have one of those brains that continues whether I like it or not. When I started following Haley, she was 20 years old and an exceptional looking young lady who has likely been hit on a lot by much older men (she
• Video Pro X

  10 answers, most recent on 8/21/2022

  RE: ADVICE PLEASE
  @johnebaker Hi John. I only suggested using the Direct X 9 option due to the age of the program. I wasn't aware it could handle Direct X 11.1. @MCK Hi Mark. Laptops tend to get misused by everyone. Often actually sat on laps or soft furnishings and
• SOUND FORGE

  9 answers, most recent on 7/28/2022

  RE: Spectra Layers Pro 8
  @rraud Thanks for the email address. The "12 step cheat sheet" will definitely come in handy. I basically gave up trying. BTW. I have been using Sound Forge since the early Sonic Foundry days - long before Sony. I got vs.14 because it came with a
• Movie Studio

  26 answers, most recent on 8/20/2022

  RE: Sound Mixing problems
  @johnebaker @browj2 Hi John. (CB) That doesn't happen for me. Nothing on the track on either side of an object, Curve does nothing. If there is an adjacent audio object, then it will affect that object, but not the track curve. Can you demonstrate
• SOUND FORGE

  4 answers, most recent on 6/18/2022

  RE: customize keyboard
  Can I customize the keyboard to create a shortcut for mute Yes and no @David-Lay5409 ,Do you have SF Audio Studio or SF Pro? SFAS does not have a keyboard shortcut editor, but the control file's code can be edited manually. If you have SFP, the
• Video Pro X

  17 answers, most recent on 5/21/2022

  RE: Video Pro X 14 Released - What's new? Bug fixes?
  @johnebaker . . . . Just like Magix taking away the up-down arrow play functions. . . . I can't think of any other video editor I have used, that used these for forward/reverse playback, the 'industry standard shortcuts' for playback are space bar,
• Video Pro X

  17 answers, most recent on 5/21/2022

  RE: Video Pro X 14 Released - What's new? Bug fixes?
  Just left click the numbers in either the horizontal or vertical boxes and drag the mouse left or right to increase / decrease the size. This is typical of the nerds taking over. For the sake of cleaning up the interface by getting rid of that