• Movie Studio

  27 answers, most recent on 1/29/2022

  RE: Aspect Ratio and Movie name problems
  Magix Support has acknowledged that the aspect ratio problem exists and they said they will discuss it at the next meeting. The problem sometimes comes about because the export doesn't work correctly. I had to adjust the parameters when exporting an
• Video Pro X

  22 answers, most recent on 3/2/2022

  RE: Wich CPU, Graphic card for VPX 13?
  @profilaxagm Hi. If you look at my system specs in the blue + SIGNATURE at the base of my posts and each contributors forum posts, you will see who is using what on their systems. You may notice in my signature that I'm running an i9900K with an
• Video Pro X

  22 answers, most recent on 3/2/2022

  RE: Wich CPU, Graphic card for VPX 13?
  @profilaxagm Hi. What is the best cost-effective PC configuration in terms of CPU, graphics card and RAM for VPX 13? In some respects that is a very loaded question. While the programs' specification page lists the minimum requirements to run VPX 13
• Video Pro X

  34 answers, most recent on 1/28/2022

  RE: No sound on .m2ts nor .m2v videos
  @MME007 Hi Mark. When you said I don’t plan replacing my only 8 years old i7 based computer soon. I wrongly assumed the i7 processor was only a 7 year old processor but the CPU i7-4770K is actually a nine year old processor so the inboard Intel HD
• Video Pro X

  34 answers, most recent on 1/28/2022

  RE: No sound on .m2ts nor .m2v videos
  Hi Ray, My CPU i7-4770K 3.5 Ghz has a graphic processor "Intel HD Graphics 4600".VPX offers me the possibility of hardware accelerating with the CPU. Not sure about what it exactly means: CPU as a CPU or using this graphic processor?
• Video Pro X

  34 answers, most recent on 1/28/2022

  RE: No sound on .m2ts nor .m2v videos
  @MME007 Hi Mark. I assume your Intel processor does not have an inboard HD 630 graphics chip which would have helped but your nvidia card actually has a twelve year old graphics chip. If the Intel chip does have an inboard graphics chip but has been
• Movie Studio

  7 answers, most recent on 1/30/2022

  RE: MEP will not open after activation of third party plugins
  @kate-m Hi Kate. I would go for an Intel GPU with an inboard GPU. I don't personally think at this point it has to be the latest generation of chips and an eight, ninth, or tenth generation chip at this point and at least an i7 as that seems to be
• Movie Studio

  7 answers, most recent on 1/30/2022

  RE: MEP will not open after activation of third party plugins
  @kate-m Hi Kate. I think you have basically run of of ram. The Magix site said you needed a minimum of 4GB to run Movie Edit Pro and advised you would need more. Minimum system requirements Processor: 2.4 GHz RAM: 4 GB or higher Graphics card:
• Movie Studio

  25 answers, most recent on 1/20/2022

  RE: magix edit pro premium not registering both audio tracks of a video
  @CubeAce See attached link of the video I'm testing on. Also please note that it's not playing both tracks at once but when I put it into HD movie Marker app (by Microsoft just clearing it up that we aren't having any miscommunication) that I can
• Photostory

  4 answers, most recent on 1/29/2022

  RE: Mov. file will make PhotoStory crash, no matter what
  @Jean-Marc-Giroux Hi . . . . Error in module "Qt5CoreMx64Qt5.15.1.dll" . . . . See this solution for the crash issue. If this does not fix the issue are the Intel HD 5500 drivers up to date? The latest version is 15.40.48.5171 (15.40) John EB
• Video Pro X

  23 answers, most recent on 1/27/2022

  RE: [Closed] Neat Video Resolution
  @Pawel-Rybinski Hi, and welcome to the user to user forums. Every 'Upgrade' of any video editing program normally comes at a cost if any of the hardware is no longer supported by the new program. Did you check for the needed specifications before
• Video Pro X

  17 answers, most recent on 1/17/2022

  RE: What should I be setting for bit rate, etc. for max export quality?
  @Wayne-McIlvaine Hi, For 4K, I would have Program Settings at UHD/UHD-2 (unless you filmed at 4K 4096x2160 17:9) which is Ultra HDTV 16:9 (3840x2160) and use the same settings for export to MP4. I would change nothing. Magix has optimized the
• Movie Studio

  67 answers, most recent on 2/8/2023

  RE: Uploading 3D video to YouTube?
  @CubeAce thanks. This video should look even better once YouTube finishes rendering it to HD then 4K. Actually I do a fair bit of stuff on my macs and it’s rare now I have to go back to windows. I always keep either windows 10 Fusion or Parallels
• Photostory

  6 answers, most recent on 1/17/2022

  RE: No video output on export
  @James-Kidd Hi In addition to @emmrecs comment. What options is the Program Settings, Device options, Video mode option set to? Which video format are you wanting to export to? The image you have posted shows you are exporting to MPEG-2 format with
• Movie Studio

  67 answers, most recent on 2/8/2023

  RE: Uploading 3D video to YouTube?
  @CubeAce @AgingTechNerd Can you confirm the resolution of the files you have tried Here you go, Ray: GeneralComplete name                            : \\FOXCONN\MEP Files\HEVC Test\20220114_090434.mp4Format                                   :
• Off topic

  One answer, on 1/11/2022

  [Closed] NewBlueEffects w/ Sony Vegas Movie Studio HD Platinum 11
  (Not sure if this is the right place to ask this)..I own Sony Vegas Movie Studio HD Platinum 11 but recently had to install it on my new computer. I have lost my serial # for the NewBlueEffects included on the installation disk (I found my original
• Samplitude

  7 answers, most recent on 1/10/2022

  RE: Update will not work
  Thanks John . Heres the info you need I am on a Windows 10 home system. Version21H1 (OS build 19043.1415) Processor    Intel(R) Core(TM) i7-4710HQ CPU @ 2.50GHz, 2501 Mhz, 4 Core(s), 8 Logical Processor(s) Graphics Card   Intel(R) HD Graphics
• Movie Studio

  5 answers, most recent on 1/9/2022

  RE: Encoding failure
  @rickduley Hi Rick From the crash logs the important data is: 2022/01/09 11:09:04 [INFO]    [DiscMaker]: BurnSupport: 2 device(s) found2022/01/09 11:09:05 [WARNING] [DiscMaker]: setting no speed limit2022/01/09 11:09:05 [WARNING] [DiscMaker]: DBK
• Movie Studio

  10 answers, most recent on 1/9/2022

  RE: Sections exporting black
  @CubeAce Hi Ray . . . . What about the DDR3 1066/1333 limit? . . . . This would only affect the data transfer rate - which I covered with the comment 'As @CubeAce has suggested Preview playback may be somewhat jerky with 4K UHD video.' Exporting may
• Movie Studio

  30 answers, most recent on 1/9/2022

  RE: Bought Moviestudio 2022 today..buggy?
  Movie Studio 2022 Suite Version 21.0.1.92 (UDP3). Peter, Intel HD 630 option is available: Program Settings, Import, Processing and Export. Currently I have the NVIDIA card set in for all 3.  
• Movie Studio

  10 answers, most recent on 1/9/2022

  RE: Sections exporting black
  @Christian-Rinke, @CubeAce Hi Thanks for the heads up on the link, is now fixed. The i7-2600 is certanly an older model, however there should be no issue with DirectX 12 as this is part of Windows 10 and the GTX 1060 does support it. . . . . however
• Movie Studio

  27 answers, most recent on 1/29/2022

  RE: Aspect Ratio and Movie name problems
  Here is a link to some of my test PAL files: https://1drv.ms/u/s!AgEkZSUlkAcxgb0eg2M8ATSCee6zgQ?e=dygZWU The problem I am having may be related to the Lagarith AVI, and not to other formats which have aspect ratio metadata. Unfortunately, I have to
• Movie Studio

  27 answers, most recent on 1/29/2022

  RE: Aspect Ratio and Movie name problems
  The 3D video problem is that MEP doesn't issue an error message for an unsupported output. Starting with a full 4k 16:9 input and trying to get a full width side by side stereoscopic output would be 2k height, but 8k width which is unsupported. MEP
• Movie Studio

  20 answers, most recent on 1/19/2022

  RE: Movie edit pro 2022 V 21.0.1.111 crashes/blocks (= unworkable)
  First of all: thanks all 3 of you to try to help m! Here some answers/reactions: @John...the clip I want to work on is derived from a BluRay: yes, only to give an example. I have the same problem with other formats, even without a clip on the