• ACID

  6 answers, most recent on 11/13/2019

  RE: Video will not load on laptop
  I've been using avi videos on AP8 build 233 on my studio desktop. However, the same videos will not load into the same version of Acid on my Asus gaming laptop. Does anyone have any suggestions? Thanks What CODEC are these videos? AVI is a
• ACID

  6 answers, most recent on 11/13/2019

  Video will not load on laptop
  I've been using avi videos on AP8 build 233 on my studio desktop. However, the same videos will not load into the same version of Acid on my Asus gaming laptop. Does anyone have any suggestions? Thanks
• Movie Studio

  3 answers, most recent on 10/30/2019

  RE: Sync issue with MEP 17 and variable bit rate mpegs.
  @TGL1 Hi Thanks for the full MediaInfo data. There is something 'odd' with the video - from the analysis: Scan type                                : ProgressiveScan order                               : 2:3 Pulldown The above suggest that the video
• Movie Studio

  25 answers, most recent on 11/14/2019

  RE: Making a series of clips from a single video
  Hi Peter, The footage was from a Sony Video 8 Handycam tapes which were then transferred to avi format. I am working with the avi files. Does that clarify? Thanks! Bill
• Movie Studio

  25 answers, most recent on 11/14/2019

  RE: Making a series of clips from a single video
  @Bill_S I tried the scene recognition suggestion, but couldn't get the scenes recognized. You didn't answer the question I asked earlier - ie Is your AVI video from a tape that has been captured from a DV camera or such? If it is a single file in
• Movie Studio

  28 answers, most recent on 10/24/2019

  RE: MEP 2020 TK2 Bug
  @browj2 @johnebaker Thanks for the feedback. Maybe Speed > Interpolate only works well with Interlaced video. I used interlaced DV AVI footage way back in MEP2004 and thought that I was able to slow it down smoothly to very low speeds and I don't
• Movie Studio

  25 answers, most recent on 11/14/2019

  RE: Making a series of clips from a single video
  @Bill_S Is your AVI video from a tape that has been captured from a DV camera or such? If it is a single file in the timeline with individual scenes in it then you can use Scene Recognition (Rt. Click) and it will divide it into scenes making it
• Movie Studio

  16 answers, most recent on 10/18/2019

  RE: Choppy playback, unstable work and delayed response.(Nothing helps)
  @Emillo @browj2 I notice you are both on MEP2019 which does not have the new Infusion Engine that helps playback with multiple tracks and GPU accelerates transformations like Size Position and Rotation among other effects. Rotation always required a
• Movie Studio

  16 answers, most recent on 10/18/2019

  RE: Choppy playback, unstable work and delayed response.(Nothing helps)
  @Emillo Hi, The title 'Title templates-3D animation Basic' -> 'Pulsating1' is a 3D Maker object (X3D) and these can greatly drag down playback quality, especially with more than 1 at a time. Did you try rendering the range to include the title
• Movie Studio

  15 answers, most recent on 10/11/2019

  RE: Choosing project frame rate setting?
  @Scenestealer Hi Peter, That's a terrific tip, thanks a bunch! Never used 'Cast to Device' before. Over the last 30 mins or so I tried all the video file types I could find quickly. All of the following played OK:MP4, AVI, MKV, MOV, MPG, M2TS, TS,
• Movie Studio

  19 answers, most recent on 9/15/2019

  RE: Disabling Automatic Project Save - Advice Please
  Jeff Thanks for commenting. I exported the project movie as and AVI file which I'll use for playback. I don't need a backup of the project files as I won't use them again. I've got the AVI file. Project over. On other occasions I do backup the whole
• Movie Studio

  6 answers, most recent on 9/13/2019

  RE: Exporting Movie To AVI - Advise Please
  @Whalebat There are a lot of requests about how to export at best quality and which codec or bitrate is better but there is no specific answer. All we can say is there will be some quality loss regardless although whether it is visible on playback
• Movie Studio

  6 answers, most recent on 9/13/2019

  RE: Exporting Movie To AVI - Advise Please
  @Whalebat 5 - 10 minutes giving a file of nearly 8GB suggests you are using "Uncompressed AVI" format. Such files are always huge and a lot of computers, even those which are pretty high-end, will struggle to play them smoothly, if at all. What is
• Movie Studio

  6 answers, most recent on 9/13/2019

  Exporting Movie To AVI - Advise Please
  I notice that exporting a small movie ( 5 - 10 mins), creates an AVI file of about 7.9GB What is the best file format to export to with best quality at a low file size. I've look through the manual but can't find any explanation. Thanks
• Movie Studio

  19 answers, most recent on 9/15/2019

  RE: Disabling Automatic Project Save - Advice Please
  Hi JohnCB It's a long time since I used MEP Plus, thanks for the headsup ! I'm just trying to remember how the software works. I was recording my desktop movement (Screen Recording), then I exported the video to AVI. On this occasion I don't need
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  @CubeAce Hi Ray Although I'm sure the more cores for playback the better, but noting it probably doesn't affect render times. I presume you mean by that, "2 heads are better than one", so yes 2 GPU's seem to be giving me a benefit for playback and
• Movie Studio

  No answers, created on 8/28/2019

  2020 version botched 3D display, 2019 was OK
  I am creating a slide show with side by side (SBS) full width 3Dimages.  I put them into MEP, and then select 3D.  See jpg withincorrect aspect ratio.  The image is displayed as if it were SBSanamorphic half width.  If I output the video it is
• Movie Studio

  6 answers, most recent on 8/15/2019

  RE: "Please install the following codec to decode the format 'V210'"
  Here is the AVI GeneralComplete name                            : D:\Herb Alpert and The Tijuana Brass_1_1.aviFormat                                   : AVIFormat/Info                              : Audio Video InterleaveFormat profile              
• Movie Studio

  6 answers, most recent on 8/15/2019

  RE: "Please install the following codec to decode the format 'V210'"
  @RobertR Hi . . . . Magix Movie Edit Pro 2015 . . import some uncompressed AVI files . . . . install the following codec to decode the format 'V210'". . . . . AFAICS the V210 codec requires Quicktime to be installed, however if the V210 is 10 bit
• Movie Studio

  6 answers, most recent on 8/15/2019

  RE: "Please install the following codec to decode the format 'V210'"
  @RobertR Hi . . . . Magix Movie Edit Pro 2015 . . import some uncompressed AVI files . . . . install the following codec to decode the format 'V210'". . . . . AFAICS the V210 codec requires Quicktime to be installed, however if the V210 is 10 bit
• Music Maker

  One answer, on 8/14/2019

  RE: How do I add video to audio so I can post it on youtube?
  @dulihny Hi Assuming you do not have any video editing program eg Movie Edit Pro, Video Pro. You can add a video clip to an arranger track in Music Maker and export the video + audio from the arranger as an AVI or WMV video file, Music Maker does
• Movie Studio

  27 answers, most recent on 8/12/2019

  RE: Decompressing gopro footage
  Hi guys. Just so you know, those of us that use Magix Vegas Pro/Movie Studio (typically it was versions 14/15), we had the same problem with audio. Part of the issue from what I have seen over on those (Vegas Pro/Movie Studio) forums was that GoPro
• Music Maker

  10 answers, most recent on 8/3/2019

  RE: Looking for video clips - and how to add
  @playoftheyear Hi What is/was the oldest version of Music Maker you have/had? AFAICS on my PC, the last version to include visuals was MMM 2017 ie v 24.x.x.x Try using Windows File Explorer to search for the video files using *.mxv as the search
• Movie Studio

  7 answers, most recent on 8/3/2019

  RE: Raw AVI export mostly works OK, but other codecs do not
  NTSC 29.97fps in 2019 MEP does not export properly when creating AVI with Lagarith. I have found that the result looks correct with 30000/1001fps, but In a long export (1 minute) it adds a duplicate frame. By matching up the original with the export