• Movie Studio

  6 answers, most recent on 6/21/2023

  Movie Edit Pro Premium suddenly too slow to use
  Recently my copy of Movie Edit Pro Version 21.0.2.138 is too slow to use. I have no idea what could have changed. I have not installed any new software or changed any hardware. My hard drive (SSD) is not full. Sometimes it works and most of the time
• Movie Studio

  51 answers, most recent on 12/14/2024

  RE: How to burn files to BD with menus but without having to re-encode?
  @jak.willis HI Jak Thanks for the MediaInfo data. Tying this in with your question about rescaling, whichever way you go, upscaling to 1920 x 1080 or downscaling to 720 x 576, re-encoding is necessary. Assuming the discs are going to be played on a
• SOUND FORGE

  6 answers, most recent on 8/5/2025

  Having Problems With Sound Forge 17 Crashing Or Otherwise Not Working?
  I recently upgraded to SF17 from SF10 because I bought a new computer with Windows 11. SF10 would not install on the new PC because the license server for that old version no longer exists. I installed SF17 then launched it. Everything looked good
• ACID

  9 answers, most recent on 9/3/2024

  RE: ACID Pro/Music Studio still a valid tool/DAW choice in todays market?
  So I've since been made aware that "not everyone" ran into the Vst issue in ACID Pro, but the fix that released in AP11 took care of it for those who experienced it apparently. I have since decided to upgrade my AP10 to AP11 in my newer Windows 11
• Video Pro X

  68 answers, most recent on 3/27/2024

  RE: codec cost
  @johnebaker, understood. Activating the codec in Vegas Pro allowed the same codec to be activated in VPX. @CubeAce, I never paid attention to the codec activation, but I do "need" it since I do edit video where that codec is used by the editing
• SOUND FORGE

  5 answers, most recent on 9/14/2023

  RE: Plug-in Chainer, two annoying issues - 17.0.2
  Thanks, that does seem relevant, however, these are all 3rd party VST3 plugins, and I do get the full view of the plug-in GUI, the chainer window itself resizes too small. I assume the issues may be related, so thank you for that.  It would seem the
• Movie Studio

  17 answers, most recent on 1/11/2026

  RE: Very high RAM usage even with a few slides
  @Willy-Pesnec As I first reported, the amount of images showing in the import section does increase ram use but I had over 2,000 images of which half were at least 46MBs each and my physical ram usage did not go above 8.6GBs but the commit charge
• Movie Studio

  32 answers, most recent on 6/30/2024

  RE: Scrolling Suggestion-Thoughts Please
  @browj2 Me: or using the small jog wheel area combined with the single ,slow, speed scroll too fiddly. You: Not sure what you mean about the "combined with..." Sorry, not the best description on my part. What I meant was, the only way you can use
• Video Pro X

  62 answers, most recent on 5/15/2025

  RE: Should I choose Video Pro X or Vegas Pro?
  @ghijohansson Absolutely take your time. I empathise because I was exactly in your shoes last year. In the end I purchased all three programs! All three are excellent, targeted to different market segments. So, I'm not biased for or against any of
• Movie Studio

  10 answers, most recent on 2/21/2025

  RE: Bluray playback issues
  @cocobacon Hi . . . . the encoding values that, in your experience, need to be changed at all? These are all default for the NTSB 1920x1080 setting . . . . Assuming that your are in a NTSC standard area then nothing in the default settings needs
• Movie Studio

  35 answers, most recent on 9/14/2023

  RE: Frame Could Not Be Calculated
  @CubeAce Weird, I just wrote a comment but when clicking Comment it posted a copy of my previous comment, I've seen this before 🤷‍♂️ Yep I Googled it & 2020 came up, & yep I'd have had all previous versions, the update/upgrade overwrite I've
• Video Pro X

  22 answers, most recent on 5/10/2025

  RE: [Closed] Crash Log does not open
  @browj2 I should have mentioned that the full-screen shortcut is actually the small square at the top right of each of the windows that takes you to full-screen and back. Thanks for the tip, I'll employ it going forward. 👍🙂 Sorry, I forgot to
• Movie Studio

  11 answers, most recent on 3/18/2024

  RE: Effects freezes program
  Hi Bob. Seeing as the hardware side of things should be coping with at least 4K footage, the most common reasons for slow downs and freezing is not enough free space on the C: drive for the program to continuously generate the temp swap files it
• SOUND FORGE

  2 answers, most recent on 5/18/2024

  Picking a Device that works, but then my SF10 Cursor then disappears
  What causes this ??? ...and I've heard this from other Sound Forge Users too. I'm now running Windows 10 but this occured also when my desktop was Windows 7. When I select what I think is the best audio device...it works and sounds great, BUT then I
• SOUND FORGE

  15 answers, most recent on 5/23/2024

  New Install of SF17 and problems
  Hi, need help. Just got SF17 and have discovered some issues. I'm a sort of casual user. I've used SF before to put together music and commentary for an internet radio show, so nothing too complicated. I'm having two major issues that I can't
• Movie Studio

  22 answers, most recent on 10/11/2025

  RE: Serial Number Problem with Video Deluxe2026 Trial
  Hello again JohnEB - Very pleased with your last hopeful comments, as I do very simple transitions etc., nothing fancy. For some background, please read last two paragraphs of my very first post at the top of this thread "Serial Number Problem with
• Movie Studio

  25 answers, most recent on 8/7/2025

  RE: Any decent support for Insta360 videos yet?
  @Reyfox I guess you are referring to 360 edited final video? The software can export to various other formats. Yes that is correct. I am referring to the immersive 360 video file that can be created. This type of file is limited to H264. Just
• ACID

  4 answers, most recent on 9/8/2023

  RE: can't authorize acid 7
  @charles-jonkey The softwares are not officially compatible with Windows 7. I personally think that especially Video Pro X 14 could make problems because it also needs a relatively modern graphics card. Acid 10 might work but I don't know it for
• Movie Studio

  6 answers, most recent on 9/27/2023

  RE: Movie Studio Ultimate
  @Stephen-Simmons Hi, I don't want to get into which program is better, more stable or can/can't do certain things, this has been discussed many times. so - The Trial can fly past too quick to evaluate the program properly so if you mention your
• Audio Cleaning Lab

  12 answers, most recent on 7/21/2025

  RE: Audio Cleaning Lab 4 "Error While Writing Noise Sample File"
  @Former user Hi, See the video below that I did about the problems with SFACL4. I have been after Magix for 2 years. All tickets to support with reminders are appreciated. Magix should be embarrassed to have this product go out with such obvious
• Video Pro X

  40 answers, most recent on 6/7/2023

  RE: Sony FX3 files compatibility with Video Pro X
  @johnebaker Hi, yep that's the only conclusion i can give too 🤷‍♂️ I use VLC & MPC players, both play it no problem You can delete this if you want. No problem in Vegas too PS, I don't do audio stuff, I have Sound Forge Audio 15, that came with
• Movie Studio

  24 answers, most recent on 2/3/2025

  RE: Edited video length
  @Jennifer-Wilson Hi, I'm not sure what the problem is but Movie studio 2025 is not an upgrade from Movie Studio 17 Platinum, it's a completely different program. Magix have been doing this slight of hand offer to Vegas Movie studio owners with the
• Movie Studio

  38 answers, most recent on 11/20/2023

  RE: movie studio 2023 suite - 4k video edits
  gid i did the outputs but the software does not do txt files its 00:30 in uk i will come back on with details tomorrow   thanks everyone for responses @spuddy13 I'm in the UK too, Leeds. You choose Text from the options at the top of the window. I
• Movie Studio

  35 answers, most recent on 1/24/2024

  RE: Reorder Audio/video tracks in Moview Studio 2022 Suite?
  The simple, 2 or 3 second duration method of clicking the header of a track and, then, dragging it higher or lower within the hierarchy, so that an image, movie, text or whatever is now above or below another image, movie, text or whatever just made