• Video Pro X

  6 answers, most recent on 1/17/2014

  RE: Is it possible to export video's, edited by Magix Pro X5 to m2t file format?
  Hi, Normally the AVCHD export from software was created to export to the camera the same type of movie without need to render. If you own a Panasonic camera when you shot a video you create an AVCHD file with extension file in the stream folder
• Video Pro X

  6 answers, most recent on 1/17/2014

  RE: Is it possible to export video's, edited by Magix Pro X5 to m2t file format?
  Hi Yes it is - Select Export as mp4 and in the preset options select the AVCHD transport stream which meets your needs. John
• Movie Studio

  5 answers, most recent on 1/15/2014

  RE: Fails to load saved work correctly
  Hi Pete If you are importing from the cameras as mpg 2 HD then leave the option on.  It is if you are importing to mp4, AVCHD etc that you do not need the frameable option. Cheers John
• Video Easy

  2 answers, most recent on 1/7/2014

  RE: Importing video clips from hard drive
  Hi, You did not say which version of video easy you are using, but the import spec for the current version (2014) is Supported import formats Video: AVI, DV-AVI, MPEG-1, MPEG-2, MPEG-4, MTS, M2TS, MXV, QuickTime™, WMV(HD), H.264,
• Movie Studio

  5 answers, most recent on 1/8/2014

  RE: Movie Edit Pro 16+ -- HD video support?
  Hi, According to the Movie Edit Pro 16 Plus manual, you should be able to edit AVCHD.  Provided your system has the requirements Minimum requirements for HD editing: • Intel Pentium 4 with 3 GHz or dual core with at least 1.3 GHz • 1 GB RAM
• Movie Studio

  11 answers, most recent on 1/3/2014

  RE: How to get audio from my Canon HFS21 footage
  I submitted the question to Magix support line and finally got the following answer: Dear Mr. Smeesters, Thank you for your message. The problem is with the fact that Dolby Digital decoding is unfortunately no longer supported in the
• Movie Studio

  11 answers, most recent on 1/9/2014

  RE: why is finished vidoe footage blurry?
  Hi Martin Thanks for the Media Info data about your files. As I suspected - Whatever Export profile you used to create those files is chalk and cheese compared to your original cameras AVCHD profile which appears to be 1080 50P from
• Photostory

  5 answers, most recent on 12/30/2013

  RE: How does one create a Blu-Ray compatible disk with 1920x1080p 60fps 16x9 specifications?
  Hello John, Thanks for the info.  I like the idea of using the BD-RE disks until a working formulation is established.  The Blu-Ray BD-R disks that I am using are manufactured by Memorex.  The comment that I made about them being expensive was a
• Photostory

  5 answers, most recent on 12/30/2013

  RE: How does one create a Blu-Ray compatible disk with 1920x1080p 60fps 16x9 specifications?
  Hi Which version of Photostory on CD & DVD are you using? Looking at the images above you appear to be exporting to AVCHD file - are you then writing this file to disc with some other burning software? For maximum compatibility you
• Photostory

  5 answers, most recent on 12/30/2013

  RE: How does one create a Blu-Ray compatible disk with 1920x1080p 60fps 16x9 specifications?
  Hello Yvon-Robert, Thank you for your suggestions.  I have burned from ISO images and written the encoded videos directly to disk with equal lack of success.  Blu-Ray is a set of standards laid down by a consortium of vendors from across the
• Photostory

  5 answers, most recent on 12/30/2013

  How does one create a Blu-Ray compatible disk with 1920x1080p 60fps 16x9 specifications?
  How does one create a Blu-Ray compatible disk with 1920x1080p 60fps 16x9 specifications?  The presets in Photostory 2014 do not include frame rates above 30fps.  I have built an AVCHD movie using these specs under the AVCHD burn section, but the
• Movie Studio

  11 answers, most recent on 1/9/2014

  RE: why is finished vidoe footage blurry?
  Hi You have a conflicting of settings  and statements here You say you are exporting to AVCHD and using a Sony BD player to view the video - are you using some other software to Burn an AVCHD or BD disc or are you using MEP to create the AVCHD
• Movie Studio

  11 answers, most recent on 1/9/2014

  RE: why is finished vidoe footage blurry?
  Hi Martin Thanks for the info. My original suspicion was you had a NVidia graphics option which I have found can (not always) produce softer / blurry sections when using the graphics chipset to offload rendering from the CPU. Do you have the
• Movie Studio

  11 answers, most recent on 1/3/2014

  RE: How to get audio from my Canon HFS21 footage
  Hi Olivier Can you upload a short ~ 10 sec clip from the camera, to somewhere like DropBox and post the link to it,  for us to test with MEP 2014 . . . . . Since the record button is the advised method in the tutorial . . . If you are using
• Movie Studio

  11 answers, most recent on 1/9/2014

  RE: why is finished vidoe footage blurry?
  Hi all,   thanks for your speedy replies. I'll endeavor to be as detailed as possible in the hope that you may be able to provide a solution for me! System used is Windows 8. Lenovo G780 Memory Ram 7.6 Processor subscore 6.1 1TB Hard
• Movie Studio

  11 answers, most recent on 1/9/2014

  why is finished vidoe footage blurry?
  After upgrading to Movie Edit Pro 2013, I am trying to do a mix of AVCHD footage from standard Sony camcorder. No problems with the editing, however the finished footage looks washed out, blurred when movement in progress - I never had this with
• Movie Studio

  11 answers, most recent on 1/3/2014

  How to get audio from my Canon HFS21 footage
  I'm currently evaluating Magix Movie Edit Pro 2014. I'm trying to import video recorded on a Canon HFS21 camcorder. Those files are AVCHD with AC3 audio. They play nicely with video and sound in Windows and in VLC. Once imported in Movie
• Movie Studio

  8 answers, most recent on 12/3/2013

  RE: Program crashes system
  Thanks for your reply, terrypin. I read the sticky, and did search a bit. I saw many reports of this issue, focusing on the thread by mcoop.  I have a similar hardware setup as her, with an ATI Raedon 8600 dual screen setup. It is touchy, and I
• Movie Studio

  7 answers, most recent on 3/3/2014

  2014 - Unwanted behaviour when displaying 5.1 audio tracks
  Hi Can others test this behaviour please with some 5.1 sound AVCHD camcorder footage in MEP2014. With more than one clips overlapping (ie crossfaded etc.) in the timeline, If you "Select all" and Rt.click on the Audio   > "Display Sound
• Video Pro X

  5 answers, most recent on 11/29/2013

  RE: Bluray disc from AVCHD video footage
  Hi . . . . Clearly, you will need a BD writer rather than a DVD writer to burn the actual disc. . . . Well actually you don't, providing your movie is less than 20 - 25 mins long you can burn a BD movie to standard DVD disc in a DVD
• Video Pro X

  5 answers, most recent on 11/29/2013

  Bluray disc from AVCHD video footage
  Bluray disc from AVCHD video footage, How to? AS in the case of DVD, I would render the edits to MPEG ll from AVCHD footage and check for issues if any before burning to DVD. Like wise I prefer to render for BD compatible files and check before
• Movie Studio

  7 answers, most recent on 11/27/2013

  RE: MEP 2014 export settings for MP4
  Hi Terry I have been experimenting with Burning options and it crashed when trying to burn a DVD from HD material - a mix of AVCHD, MOV and JPG images - will look into this more when time allows. Exporting mp4 is not an issue. You can check
• Movie Studio

  6 answers, most recent on 11/25/2013

  RE: Video sound cleaning lab 2014 with Movie Edit Pro?
  Hi Kami, I missed your post. The other programs is way to the bottom of the list and I was making up my post while you posted yours. Also, I didn't download the updated program as a trial, so I am depending on those who did. As I indicated in
• Movie Studio

  2 answers, most recent on 11/24/2013

  RE: Why does MEP14 Pro no longer play or render MPEG-4 files correctly, after installing the most recent Nov. 2013 update?
  Let me correct myself, it's not that it doesn't play, (Not due to muting), it does play.  But very choppy. Audio dropping in and out during playback. It also renders the project the same way. Only on MPEG4 audio files. Wave files are played back