• Movie Studio

  8 answers, most recent on 9/2/2020

  RE: Black preview, sluggish performance
  @CubeAce @TorSverre-Engen @johnebaker So...I swapped the graphics card for a AMD Radeon R9 and everything seems to work. Ain't it funny? Maybe not.......the 650TI Boost has a fairly low shader count - likely less than the R9 (you did not say which
• Video Pro X

  37 answers, most recent on 9/3/2020

  RE: RUNNING OUT OF SPACE
  Will try. The disk is one I burned myself - it's a film I made a few years back. So nothing commercial.  
• Video Pro X

  37 answers, most recent on 9/3/2020

  RE: RUNNING OUT OF SPACE
  Actually, a new issue... wonder if you can advise? I have copied the film I am working on from a Blu-Ray disc (long story). But the audio isn't playing. Any thoughts?
• Video Pro X

  37 answers, most recent on 9/3/2020

  RUNNING OUT OF SPACE
  Hi everyone. Advice please. I am editing a lengthy film, shot in 4k but scaled down to Full HD. And my 500GB Hard Drive is almost full. What can I move or delete to free space? For example, I see loads of proxy files bearing the film's name,
• Movie Studio

  2 answers, most recent on 8/29/2020

  RE: Video Image Wonky
  Hi John, I filmed in landscape so not sure why it's like that. I'm going to try to reinstall the 2020 version. Its annoyed the hell out of me. Been trying all sorts for hours! If it works I'll stay with 2020 until the 2021 is tried and
• Movie Studio

  272 answers, most recent on 4/1/2021

  RE: Movie Edit Pro 2021 is out - New features
  @pmikep I think Magix are future proofing their product. The Adobe products have been able to use Ryzen processors for some time now and some large YouTubers spend upwards of $10,000 a year for the privilege. Large (or popular / semi pro material
• Movie Studio

  No answers, created on 8/26/2020

  Frame rate & audio sync bad in AVI, 3D images reversed, JPS support
  The current 2021 version of Movie Edit Pro still has the same problems with frame rates as the previous versions.  I have reported this several times, to no avail. The historical NTSC DVD and broadcast rate is exactly 30000/1001 or approximately
• Movie Studio

  26 answers, most recent on 8/26/2020

  RE: Frame size for export.
  @browj2 Hi John I think you mean "Don't digitise at 720 AND don't then use Size/Position to fill the 16:9 frame - but it's OK to do it if your raw material is 1440x1080". My old Super 8 films pass the test, but my newer Hi 8 and 8mm camcorder files
• Movie Studio

  26 answers, most recent on 8/26/2020

  RE: Frame size for export.
  @Richard-Curtis Unless I am exporting only to DVD and the source material is DVD quality or worse, I use 16:9, full HD (1920x1080) as my project settings. I do not normally shoot 4k and, like you, I am using mostly old material that is full HD or
• Movie Studio

  26 answers, most recent on 8/26/2020

  RE: Frame size for export.
  I agree with Jeff, keep the image 4x3 but load it & export in a 16x9 format & accept the bars, keep the image original, I've been watching Red Dwarf that's 4x3 😂 My rubbish Huawei phone takes the best photo in 4x3, the other option on the
• Movie Studio

  26 answers, most recent on 8/26/2020

  RE: Frame size for export.
  @browj2 Hi John Thank you for this additional information; it makes plenty of sense but I'm going to have to play with the Size/Position effect until I fully comprehend its mode of operation. So far I've only used keyframes for audio editing so I
• Movie Studio

  272 answers, most recent on 4/1/2021

  Movie Edit Pro 2021 is out - New features
  MEP 2021 has been released. See the details on the Magix.com site. New! INFUSION Engine 2 for unparalleled performance Edit and export 8K Ultra HD video HiDPI program interface - Redesigned icons, preview videos and control elements Improved
• Rescue Your Videotapes!

  4 answers, most recent on 8/22/2020

  RE: Frame drop problem - frames don't make it to the final recording
  @emmrecs, @emmrecs Hi . . . . some frames are missing. While that happens to tapes that have aged poorly, this problem is also evident in recordings of tapes that are in good condition . . . . There are many causes of dropped frames from video
• Video Pro X

  22 answers, most recent on 8/22/2020

  RE: VPX12 Mercalli V5 Suite upgrade?
  @browj2 Hi John. Then it can't be done as it is a 3D filming problem involving foreground, mid distance, and background independent movement where movement happens at different speeds and distances of movement change between each component of the
• Video Pro X

  82 answers, most recent on 9/20/2020

  RE: [Closed] HumbleBundle with Video Pro X11 for 25$ US
  @Reyfox Hi. It didn't take that long to upload although the upload speed depends on the speed at their end and varies, it took that long for YouTube to then re-render the file to play at their chosen resolutions once it had fully uploaded. My rated
• Movie Studio

  23 answers, most recent on 8/20/2020

  RE: Preview of 60fps playback horrible - editing impossible
  @DuneElliot Hi . . . . I updated the build in comment above yours. . . . Thanks - I saw that after posting at just about the same time as you. . . . . I was using it on AVCHD prior to this but after some research moved to the XAVC format for better
• Movie Studio

  23 answers, most recent on 8/20/2020

  RE: Preview of 60fps playback horrible - editing impossible
  Hi there. Thanks for getting back to me. I will correct my file format to say I used XAVC S which the website says it does support when I Google it. Maybe I'm wrong. I would have thought it was a supported file type if it plays, even if it does
• Movie Studio

  23 answers, most recent on 8/20/2020

  RE: Preview of 60fps playback horrible - editing impossible
  Computer is HP Pavillion running Win X on 64bit - . I am not sure of the graphics card but can check that if necessary. This isn't a gaming computer, just a computer with a better graphics card and faster RAM to make gaming smoother than a standard
• Movie Studio

  23 answers, most recent on 8/20/2020

  Preview of 60fps playback horrible - editing impossible
  Been using Magix for a number of years but only just upgraded to Magix 20 Pro. Recently ventured into the world of YouTube and now filming at 60fps so can make the most of slo-mo for B-roll Magix edition is most recent (pro edition 20) and camera is
• Movie Studio

  13 answers, most recent on 8/13/2020

  RE: Automatic removal of spaces between clips
  @Scenestealer Hi Peter, Possibly, but not always. I will watch more carefully. One place where I regularly get a 1 frame gap is using right-click, "Insert still image at the playback marker." I never thought to include this in the bug list. It is
• Movie Studio

  13 answers, most recent on 8/13/2020

  RE: Automatic removal of spaces between clips
  Yep i've just been playing with this, I got my Intel driver to install so was checking the exporting 👍 i made this experiment bigger, more objects on several tracks & exported it with the gaps in the top track, normally if there was agap with
• Photostory

  8 answers, most recent on 8/8/2020

  RE: Straighten routes in Travel Maps
  @GrumpysDad In TM, just add a few points along the plane route at the beginning and end and adjust the Animation Duration of each point to get the effect that you want. You need to add 2 or 3 points at about the same distance apart, giving each a
• Video Pro X

  2 answers, most recent on 8/7/2020

  STORAGE OF FILES
  Hi everyone. My laptop's SSD has gone from 500GB to about 80GB and is going to get smaller as I work on my project. I don't understand proxy files and such like, so...I have a folder on my desktop full of sound FX. Have used a few in this film. Does
• Movie Studio

  37 answers, most recent on 9/5/2022

  Video quality very bad after export /MAGIX MOVIE EDIT PRO PREMIUM
  Hello everybody,I am experiencing some big change in the quality when exporting a video file using Magix. After the export the video gets very blurry, sharpness is gone and quality just reduced alot. I have been using Magix Movie Edit Pro Premium a