• Video Pro X

  55 answers, most recent on 7/4/2019

  RE: VPX problem with Rotation/horizon levelling
  Just received this email back from Magix Support:- Thank you for your message. You are right, after version 268 we have experienced some issues but meanwhile we could solve these problems and using version 306 now. With this version I couldn't
• Video Pro X

  4 answers, most recent on 12/24/2018

  RE: Version 16.0.2.306
  Maybe the developers should look at my prior history of issues, especially the dates. It always seem to be this time of year, do an update, sets you back years it seems. Titles seem to tear, fix horizontal, and rotate/zoom are still unacceptable.DVD
• Video Pro X

  55 answers, most recent on 7/4/2019

  RE: VPX problem with Rotation/horizon levelling
  This item too: VPX problem with Rotation/horizon levelling many drops fill the basket....
• Video Pro X

  53 answers, most recent on 12/20/2018

  RE: [Feedback] How do you like version 16.0.2.304 ?
  Update to the list of problems: Magix has been working on these. Below is more or less what they said, comments in italics are mine: 1. Icons: This is a problem and actually our developers didn't know that. It will be fixed so thank you for this
• Video Pro X

  55 answers, most recent on 7/4/2019

  RE: VPX problem with Rotation/horizon levelling
  @RogerGunkelIf the release notes don't address any of the bugs I have then it's probably not worth updating.I think we can give Magix a list of bugs forever but the fact is, there will always be users with problems because we all use it
• Video Pro X

  55 answers, most recent on 7/4/2019

  RE: VPX problem with Rotation/horizon levelling
  Hi Doug, I agree that top rotation arrow and crop works without any problem, but the beauty of the levelling slider has always been it it so much quicker to use as the cropping was automatic. It has always worked fine until recently, so appears to
• Video Pro X

  55 answers, most recent on 7/4/2019

  RE: VPX problem with Rotation/horizon levelling
  @RogerGunkelHi Roger.I have only ever used the top rotation arrow then crop as needed.I do a lot of leveling with all my footage and this system has always worked fine even with version 304.Doug
• Video Pro X

  55 answers, most recent on 7/4/2019

  RE: VPX problem with Rotation/horizon levelling
  I just realized I had the same problem, rotate and zoom is much better EDIT But, it does OK for what I do, seems the extract audio tracks (5.1) performs quicker. Wish I had more DVD templates.
• Samplitude

  18 answers, most recent on 3/5/2023

  RE: At the end of my rope
  Update: I just snooped around and looked at the Vita interface and noticed that the volume knob was all the way down. I rotated it louder and it worked so I saved the project. I closed and reopened. Volume back to zero. Why is that happening? I also
• Movie Studio

  6 answers, most recent on 12/11/2018

  RE: New version released 18.0.2.225
  Greetings, it's a small update size (seems to be 19mb download, but it may download more in the background). Install takes about 30 seconds on my system. After the install, the program seems to load faster. As for "the list", from what I can see so
• Video Pro X

  55 answers, most recent on 7/4/2019

  RE: VPX problem with Rotation/horizon levelling
  Here is some discarded footage from a wedding I am editing, where I accidentally left the video running while I was taking some stills. All three clips are from the UHD timeline converted to HD mp4. 01 is the basic footage, 02 is using the normal
• Video Pro X

  55 answers, most recent on 7/4/2019

  RE: VPX problem with Rotation/horizon levelling
  Thanks Peter and Walter. I tried the rotation and zoom on a couple of clips earlier and seemed to be much clearer than the same clips with the rotation slider. Been out all evening with a client, so no chance to try more, but both my wife and I are
• Video Pro X

  55 answers, most recent on 7/4/2019

  RE: VPX problem with Rotation/horizon levelling
  Hi Walter Thanks for the info. Just an edit to maybe help with the translation:- Do this: take the whole(!) Clip - then use rotation + zoom and then cut it (into scenes). or: Do this with the first clip: then make a copy of the effects( - minus key)
• Video Pro X

  55 answers, most recent on 7/4/2019

  RE: VPX problem with Rotation/horizon levelling
  Do this: take the whole(!) Clip - use than rotation + zoom und than cut it. or: Do this with one cutted clip: make a copy of the effects - than mark all the clips of that camera and past the the effects good luck
• Video Pro X

  55 answers, most recent on 7/4/2019

  RE: VPX problem with Rotation/horizon levelling
  Hi Roger, The user on the French forum reported on Nov. 27 that Magix had indicated that the levelling problem was known to them, had been around for a short time, and that they were working on a fix. This was for MEP. It seems that the same problem
• Video Pro X

  53 answers, most recent on 12/20/2018

  RE: [Feedback] How do you like version 16.0.2.304 ?
  @MAGIX_Redaktion Hi Mathias, I have updated the list. Some of these are quite simple to fix. The list is getting longer: Fix the preview of icons under Templates, Design Elements, Collages - presently shows only the Cover icon - collage.png for all
• Video Pro X

  55 answers, most recent on 7/4/2019

  RE: VPX problem with Rotation/horizon levelling
  This problem is at the developing department - but in the moment you have to do it "by hand"  Go up to the rotation button and make there a good  horizon. And than you have to zoom it :-)) And excuse my limited english...
• Video Pro X

  55 answers, most recent on 7/4/2019

  VPX problem with Rotation/horizon levelling
  I am still running VPX 16.0.1.255 as it has been totally reliable and I have a lot of urgent projects that I have been working on for months and didn't want to run into some other update problem. My work is mainly weddings using up to four cameras
• Movie Studio

  19 answers, most recent on 11/28/2018

  RE: Rotate a filmclip, unable to export it for viewing
  @emmrecs ...did you also notice the Edit I added, which is, very firmly, on-topic! Yes, I did. I agree that there should not be any reason for using any other program. So if I need to do the editing in 2 steps (or more) I should be able to use the
• Movie Studio

  19 answers, most recent on 11/28/2018

  RE: Rotate a filmclip, unable to export it for viewing
  @shgrude  I have tried enabling the built-in intel (i7-6700HQ), but it does not appear as a device In Program settings (shortcut Y)>Display options>Preview in arranger I see the following dropdown: I run an i7 6700K CPU, so similar to yours
• MAGIX

  No answers, created on 11/28/2018

  [Closed] Patch for Video Pro X - version 16.0.2.304
  Changes in version 16.0.2.304: Fixed: Blu-ray Discs creation. Fixed: "ghost images" with multiple export formats when using GPU support. Fixed: Performance problem when working with AVI files. Improved: Keyframes can be set with "360 degree scene
• Movie Studio

  19 answers, most recent on 11/28/2018

  RE: Rotate a filmclip, unable to export it for viewing
  @CubeAce Maybe I downloaded the wrong program, as I downloaded and installed the Conversion program. There were no option to rotate in that. I see now that I should have downloaded the VSDC Video Editor instead.Will try later. I checked off any HWA,
• Movie Studio

  19 answers, most recent on 11/28/2018

  RE: Rotate a filmclip, unable to export it for viewing
  @shgrude Sorry for my conclusion but I can only go by what I see happening. It's a very slow rendering process then on your machine. Also sorry about the program problems. I'm using the software I suggested for file rotation without any problems
• Movie Studio

  19 answers, most recent on 11/28/2018

  RE: Rotate a filmclip, unable to export it for viewing
  Then you rotated the video. Why? I was completely lost as to what you were doing. Is the video intended to be played back on cell phones in portrait format? TV's won't like this. Start again and give us screen shots of the timeline and preview