• ACID

  16 answers, most recent on 12/5/2023

  RE: Missing sound bank for ACID music studio 10.0.
  Jeff, you take it too personally. I know very well how to work in the customer service. Banning me just because I express (sarcastically, not explicitly) my position - a JUSTIFIED POSITION, would be stupid and unprofessional. You are writing to me
• Movie Studio

  66 answers, most recent on 1/29/2025

  RE: The output formats are messed up in Movie Studio 2024
  @clement5 Hi John C . . . . apparently lifted from a VHS tape likely of a broadcast . . . . IMHO if that was the case then there should be no dust, or foreign objects lodged in the fim gate which are clearly seen in the video files you provided.
• Movie Studio

  5 answers, most recent on 4/17/2022

  [Solved] Movie Studio 2022 Update - Menus have gone - help!
  Hi folks, I purchased movie studio to go on my new laptop of my older Vegas Pro 17 was single machine licensed to my desktop. As soon as it installed it insisted on an update which has removed all menus from the top of the screen and locked it over
• Video Pro X

  34 answers, most recent on 2/18/2024

  RE: NVIDIA 4070 issues on most basic video editing work
  @johnebaker, @AAProds Thanks for your tests. I opened VLC and played with the original entire video. Globally I see the same issues as with Magix, even if the behaviour is slightly different, this means the problem isn't specific to Magix. What I
• SOUND FORGE

  13 answers, most recent on 6/21/2024

  RE: Sound Forge Scripting - Efficient Cassette Tape Archiving
  @SP. What I've actually been doing manually is copying the processed "side b" audio, copying it, pasting it at the end of the quad file, and then converting the quad file to stereo. This avoids the need to make a new blank stereo file to paste
• Movie Studio

  3 answers, most recent on 8/28/2024

  Best Quality Export
  I have been using Movie Studio 2024 for approximately 6 months and have found the application buggy as hell. For example, if I'm working on one end of a project, and I move back to the other end of the project, I find that clips sometimes disappear
• Music Maker

  4 answers, most recent on 4/14/2022

  [Solved] Help: Cannot add new soundpools
  I am relatively new to the Music Maker program but have never encountered this issue before and haven't been able to find a solution online. I've bought multiple soundpools (from Producer Planet), some of which I have successfully added and used
• Movie Studio

  51 answers, most recent on 1/30/2024

  RE: Dual Layer DVDs - atrocious luck or is just my project
  internal dvd driveHL-DT-ST DVDRAMGUD0N external drive        dvd writer, plug in, no installation files requiredLite-on It corp.Slimtype eUA108   5 USB Device* usb 2.0, cord hard wired, i use a half metre extension due to the 10 cm length external
• Music Maker

  3 answers, most recent on 5/22/2024

  In File Manager resolution does not match - its too large
  SO I procured some soundpools from another source. Function Loops to be precise. AT first I had them stored in their own folder for organizational purposes, until I realized that when I re-opened my song to edit, Music Maker couldn't find the Loop,
• Xara Designer Pro

  6 answers, most recent on 2/27/2023

  RE: unlock anchor handles
  @Manuel-Vidis Hi . . . . only want one of the handles to move without changing the opposing handles position, . . . Using a circle as an example either using the Selection tool, or still in the Shape tool the opposing handle does not move as shown
• Movie Studio

  21 answers, most recent on 9/28/2023

  RE: Hardware Encoding for MPEG-4 Export Stopped Working
  @johnebaker Hi John. I don't pretend to even know anything about GPU architecture but notice all three of us are on different generation graphics cards. Is it possible that a given driver may behave slightly differently on different generation
• Audio Cleaning Lab

  7 answers, most recent on 3/3/2024

  RE: interference from left mic imported to object/project
  Hi @raoul-beaman, If I understand your query correctly to just use the right channel.. Convert the file to single-channel mono. The fast/easy way is, right-click the 'Stereo' button on the bottom status bar and choose 'Mono'. A sub-menu will pop-up
• SOUND FORGE

  42 answers, most recent on 5/28/2025

  RE: Batch Processor Crashing
  @ItsMeTho Here are some screenshots that show where to find the context menu entries:   I also installed the trial version. Which steps are you doing to crash the software? Ok thanks, I modified 'MUIVerb'. Haven't restarted yet; guessing that
• SOUND FORGE

  2 answers, most recent on 5/8/2025

  Wav Files Analysis - Key And Tempo
  Hi, can SoundForge Pro 18 batch analyze key and tempo of .wav files?I don't want to have to shell out the cost for Mixed In Key 11. Been trying analysis with Traktor Pro 4 and it's really struggling with wav files. The ID3V2 tags are inconsistent.
• Movie Studio

  20 answers, most recent on 4/15/2023

  RE: Android says 30 FPS // Movie Studio says 29-point-something
  @Reyfox tick Constant Frame Rate, Save As, Start Encode. That will generally result in a lower bitrate than the original (about half in a test I did). To get close to the same bitrate/quality (bearing in mind it is a complete recode as well), one
• ACID

  2 answers, most recent on 3/8/2022

  [Solved] ACID Pro 10 latest updates is acting up again...
  Hi! I am so very tired with Acid. Why oh why must it act up, when nothing has done to it and changes has been made. Suddenly, I noticed, when I tried to record audio track, that it muted 95% of the first note (half of second) I recorded. Why on
• Movie Studio

  17 answers, most recent on 7/17/2024

  Drop shadow on Portrait clip.?
  Hi, either I've forgotten how to use this or ........... I've already done this in Vegas but it took 20mins to render this 13min clip & I know MMS is sometimes faster because I do still use it occasionally for simple 1 track projects or
• Movie Studio

  10 answers, most recent on 4/20/2025

  RE: Magix Movie Studio 2025 TRIAL
  Hi Ray & John EB, This is what I did last night. I tried some of your suggestions but it was a disaster. I changed the settings in the program to use the CPU and actually got something on the timeline but it was all jerky. Tried to burn a
• Movie Studio

  30 answers, most recent on 9/1/2023

  RE: Screen Recording question
  @Former user The System Sounds slider can be left at the off position but the other three must be brought up to show a decent level in the application being used. This often means turning down the volume of any external source plugged in to the
• Movie Studio

  51 answers, most recent on 1/30/2024

  RE: Dual Layer DVDs - atrocious luck or is just my project
  I usually do as you let it adapt the bit rate and in this case eg DL 4497 I took it down to 90 just to be safe. Because the adaption changes to fit the disc I insert the chapter 5 frames before the desired position to give me some leverage. It gets
• Samplitude

  4 answers, most recent on 4/15/2024

  RE: Any way to have smaller Transport Control Bar in Samplitude Pro X5
  Thanks a lot for taking your time to try and help me. I really appreciate that. I already put my most used tools in the toolbar. It's how i have it now. The thing is I really like everything on the Transport Control, but it's just way too big. I
• SOUND FORGE

  13 answers, most recent on 6/21/2024

  RE: Sound Forge Scripting - Efficient Cassette Tape Archiving
  @Dan-Hicks This script only processes the current file in Sound Forge. The changes are not automatically saved. Save this script into the Sound Forge script folder (look under Tools > Scripting): using System; using System.Windows.Forms; using
• Movie Studio

  87 answers, most recent on 4/27/2023

  RE: Video replay speed faster than original loaded video
  @browj2 @Former user @hwinter2 @me_again Vegas 18 Pro audio import only. Playback marker does not move on playback. Output volume meter shows continuous overload with a DC output until around 13 seconds of play into the file. Then soundtrack starts,
• Audio Cleaning Lab

  7 answers, most recent on 3/3/2024

  RE: interference from left mic imported to object/project
  Hi Rick and John. To both of you, many thanks for your responses. Rick. Many thanks for the screen shots. I'm using SFAC lab, 32 bit, 23.0.1.22 (DP3). Am I being 'stupid' here? I cannot find the stereo button, infact there doesn't appear to be a