Search the MAGIX Community for tutorials, questions and solutions as well as for forum members

I wanted to thank everyone for their contributions as I received a response from BorisFX support after reaching out earlier, who through internal chanels helped correct the issue with Magix. My email account was re-established correctly and am now

ACID

2 answers, most recent on 9/1/2025

RE: [Solved] Zukunft von Acid

Thanks for your reply. Meanwhile I have found some threads that deal with the same subject and it seems to be the case that Acid is dead. The good news are that Acid Music Studio deals very well with modern vsti such as Izotope Ozone 11 and RX.

Video Pro X

45 answers, most recent on 6/6/2026

RE: DVDs cut don't play

Should I change the NVIDIA entries to CPU I would as I've had experience, with other software, of Blu-ray renders with NVIDIA not being Blu-ray compliant. CPU only will, of course, be much slower

Video Pro X

2 answers, most recent on 12/27/2025

[Solved] Can not install additional components - extra content.

Hello, I have purchased Video Pro X17 Ultimate edition. I have activated coupon codes, but I still can not install additional components. Have anyone experience such issue? I have wrote to Magix support, but they arent' responding. Best

Other products

20 answers, most recent on 5/27/2026

RE: Independence Pro 3.3

@RICHARD-HOWELLS Ok, the libraries are showing up in Independence. But how did they get there? Did you run the library installer for Candy and for the Independence libraries? I believe that is necessary. In my experience simply adding the libraries,

Video Pro X

45 answers, most recent on 6/6/2026

RE: DVDs cut don't play

@rickduley Hi Rick, Thanks for the images; everything appears "normal" there! And for listing the type of disc. But are they DVD+R or DVD-R? In my experience, for single-layer -R are "better", i.e. produce fewer failures. What about the other

SOUND FORGE

10 answers, most recent on 10/11/2025

RE: MP3 files skipping / glitching when opened ...

@Bill-Fike You might try experimenting with the playback buffer setting. as SP stated, the Magix low latency driver has been known to to cause problems., sometimes, system wide

Photostory

16 answers, most recent on 10/15/2025

RE: I've been using photostory for some time but now have hit bugs.

What are the experiences of other forum members about the Magix technical support? It seems to be not existant. Only sales. Not getting an answer to a question within a delay of nearly 2 weeks is outraging....

Video Pro X

9 answers, most recent on 4/20/2026

RE: 360 File from DJI OSV

@paulsweigert Paul, could you post us a MediaInfo report on one of your files, and if you are able, put a file on a file sharing site such as Dropbox, Google Drive (my website notes for GD) or wetransfer for us to experiment with. My Google Drive

Movie Studio

20 answers, most recent on 10/9/2025

RE: Video files not loading

Hi John - Emmrecs, Just to update you, I am experimenting with converting the ABCHD (mts extn) to MP 4 to see how that might work. Much smaller files. Kind regards, Vincent O'Brien

Music Maker

2 answers, most recent on 9/20/2024

RE: [Solved] Bug: IN and OUT point disappears!! :(

@Film.Maker You can usually solve this problem by clicking on the magnifying glass icon in the bottom right corner of the arranger view and switching to another view mode. P.S.: In my experience AI Large Language Models are usually very bad in

Movie Studio

4 answers, most recent on 7/17/2025

[Solved] Video Deluxe 2026 Plus: Import of some videos trim the last 2 minutes

I just purchased the product after experimenting with the trial version. I did not see this problem in the trial. When I import some MP4 videos (not all), the last 2 minutes of the video are trimmed. So instead of a video that is 45:30 in length, it

ACID

6 answers, most recent on 3/26/2026

RE: Acid Pro 10 metronome volume

@FetusK Hi Please do not post multiple times on the same topic, 2 later posts have been hidden. This is a user to user forum not Magix Support. A response time to a post or comment will depend on a user who has experience of any issue you are having

Samplitude

9 answers, most recent on 1/13/2025

[Solved] Midi enigine overload error

Hi lately I am experiencing this error which is a first ever since I have used Samplitude, it is complaining about midi overload on midi engine. Other typical errors I experience is constant freezes and lately after the latest update Samplitude

Other products

5 answers, most recent on 9/30/2025

RE: Independence Pro 3.5

@davidr1 In my experience, users have had problems loading the samples because they didn't run the Library installer. Yes, technically you can simply copy and paste the downloaded files from one computer to another, but they cannot be loaded without

Movie Studio

One answer, on 2/12/2026

RE: Can anyone recommend a decent Video Editing Software

@David-Rosingana Welcome to the Magix user to user forums. Which Magix video editing product do you own? Magix Video Pro X will allow inter-frame line-up, your free hand; I'm guessing (because I have no experience of it) that Vegas Pro might do the

Samplitude

5 answers, most recent on 4/1/2025

RE: problem with volume control for virtual instruments

I also experience the same issue especially when I hit record then the volume on the vst instrument automatically turns itself to 0

SOUND FORGE

14 answers, most recent on 8/29/2025

RE: where is spectralayers pro??

Thanks, SP. Those are my thought as well. I had really hoped to experiment with the additional features. My fear is they will neither honor their offer nor refund me, in which case they will lose a long-time user of their software. I will post again

Music Maker

16 answers, most recent on 1/12/2026

RE: [Solved] Midi keyboard not playing live

@Alex-Kirkwood Like mentioned before, you need to make sure that the Focusrite ASIO driver is selected in the Music Maker program settings.. If you click on the Advanced button next to the driver selection you'll open the Focusrite ASIO control

Music Maker

16 answers, most recent on 11/17/2025

RE: Magix music maker on linux mint

@stephen-kelly6215 An interesting experiment. There is one issue you may have, and testing will show, is latency, the Windows fix would be direct ASIO access to the sound card/device. AFAIK, no 'Linux' distribution supports ASIO natively, this

Movie Studio

32 answers, most recent on 4/2/2026

Export quality from RTX Ti3060 far inferior to UHD770

I have read at various points that CPU encoding yields better results than GPU encoding, but the experiments I'd done in the past weren't conclusive enough to justify the extra encoding time. I've just started editing drone footage videos

SOUND FORGE

4 answers, most recent on 8/5/2025

RE: differences between Soundforge 12.6 and older version.

@MoundSorge This difference basically makes the new sound forge unusable The interesting this is, that Sound Forge Audio Studio 12.6 is some kind of odd experiment. No other version has this kind of GUI. Also not newer versions (13 and up).

SOUND FORGE

4 answers, most recent on 6/10/2025

RE: [Solved] SF18 in 1440p resolution looks blurred

Try using a High DPI override setting. Right-click the SFP <.exe> or the shortcut, Select 'Properties> Compatibility> Change high DPI settings' There are a few options so you may have experiment some..In my case, the toolbar text and

ACID

12 answers, most recent on 9/7/2024

[Solved] ACID 11 Quits responding.

Once installed, it locks up and quits working. brand new installation on a gaming computer. below are my computer specs. I get 2 audio and 1 midi track recorded, then i playback the midi to trigger the synth and record that output back into acid.