• Music Maker

  8 answers, most recent on 5/26/2025

  RE: Customer Support
  @Timothy-Fowler It's also possibly dangerous to run Windows 11 on unsupported hardware. For example your processor might run too hot without the cooling system working correctly. There is no guarantee that the next Windows 11 update will not cook
• SOUND FORGE

  38 answers, most recent on 9/16/2025

  RE: MP3 conversion glitches
  Oh cool. Thanks, SP. I shall give that a go. I notice in older version of SF (13 and earlier), it would only allow a bitrate of 128 kbps if your file was mono, which audiobook files tend to be. I'll see if this is the case when I try the legacy
• Off topic

  One answer, on 9/26/2025

  Stop Magix adverts
  Bonjour tout le monde, quelqu'un peut-il me dire comment ne plus recevoir de pub Magix parce que ça me rend fou, je me sert beaucoup de M vidéo ou musique et chaque fois que j'ouvre c'est la pub et même lorsque j'allume l'ordi, alors si quelqu'un
• Music Maker

  4 answers, most recent on 11/7/2024

  [Solved] Missing loops from one soundpool
  Hello Fellow Music Creators!!👋I've looked through some of the related topics for this problem for a fix but none worked.I purchased the Techno 5 am soundpool a while back.Cool loops in there.Now the only problem I have with it is there should be 14
• ACID

  8 answers, most recent on 7/31/2023

  [Solved] Mixing console window completely disappeared
  Hi, sorry if this is a simple fix but the mixing console has completely disappeared for me. I usually have it tabbed in the dock or floating because i refer to it all the time. Cannot see it at all now. Thanks It would cool if the master meters were
• ACID

  2 answers, most recent on 6/26/2024

  RE: Compatibility with latest iZotope plugins?
  Cool, thanks! This is a totally new approach for me, definitely gonna try and see what happens. I'll report back...
• Movie Studio

  10 answers, most recent on 5/8/2024

  RE: Which Movie Studio or Video Pro X version has these features?
  @CubeAce: these PiPs are much more complex than what I need... sooo cool !
• Music Maker

  157 answers, most recent on 12/30/2025

  RE: Wishlist for the next Music Maker!
  how about some jean michelle jarre style soundpools? Slow atmospheric electronica with lots of cool synth pads, sequences and drums with heaps of effects?
• Movie Studio

  7 answers, most recent on 9/8/2024

  RE: Install issues
  Very cool. That seems to have been it. It now looks like the shot you shared. I'm sure as time goes on, I will have more questions as, like I mentioned, I have zero experience with anything like this. Thanks again.
• Video Pro X

  27 answers, most recent on 3/28/2025

  RE: .mov file is disappearing over time
  @Gid Hi Gid. Gotcha! I wasn't aware I could do and see that in Vegas. Cool. I agree, don't use Chroma key. Also, using the same clip overlapping like that could cause memory address problems. I suggest copying the mov. file but giving it different
• Music Maker

  10 answers, most recent on 7/23/2024

  RE: Can't change tempo/bpm in music maker
  Hello best. U right. I have deleted the Tab Store and now it appears cool finaly i tough its gone. Thank you so much i can now use it as i whant it thanks to you. Thank you for the Help
• Samplitude

  4 answers, most recent on 4/15/2024

  RE: Any way to have smaller Transport Control Bar in Samplitude Pro X5
  Thank you! I'll try what you say. I was hoping you were going to tell me that I could download all these cool skins someone made. I actually went back to my old Sequoia, old Samplitude Producer, and old Samplitude 10 and was reminded how much I like
• SOUND FORGE

  8 answers, most recent on 2/8/2024

  RE: Sound Forge 17 Crashes
  cool! glad to hear it helped!  
• SOUND FORGE

  10 answers, most recent on 1/11/2025

  RE: GoPro Audio Problem - Any way to restore
  Now it would be very cool if SpectraLayers or other tools like RX could stretch the spectrum image with the audio information between 10 kHz - 15 kHz back out to 25 Hz - 20 kHz It may be possible using SLP's clone tool. I use it (clone) occasionally
• Movie Studio

  14 answers, most recent on 3/26/2026

  RE: Hardware Rendering
  @Carl-Johansson when was the last time that you cleaned out the dust from everything inside your PC? Or replaced the CPU thermal paste with quality thermal paste? My computer specs are in my Signature below. I built my PC myself. I've been doing
• Video Pro X

  6 answers, most recent on 10/9/2024

  RE: replay video clips in project mode
  @ccolreavy Hi . . . . Should I upgrade my graphics card? . . . . You would have to buy a new laptop to upgrade the GPU's, in general they are not upgradeable as the GPU chip is soldered in, and the laptop cooling arrangements and circuit board are
• Movie Studio

  30 answers, most recent on 7/4/2024

  RE: My video is freezing when I try to export it. (MP4)
  @johnebaker Thanks, I don't know much about that side of things that's why I tagged you. 👍, I have an AMD CPU with no integrated graphics & a liquid cooler, + a GPU that's more than capable & 3 fans in my PC case cooling everything, (I
• Video Pro X

  14 answers, most recent on 5/3/2025

  RE: Getting rid of Audio Description
  @Can-Dive I have a paid for audio removal tool and there is a real chance it would remover the dialogue from the movie as well, especially if the movie has a mono sound track. You could of course edit that track to put the dialogue back in after it
• Movie Studio

  One answer, on 12/6/2022

  RE: [Solved] Disc Images - safe to delete?
  @MikaS Hi The disc images can be deleted if you no longer need to produce further discs. Personally I create a Master disc from which I can replicate if needed, these are kept in a cool dark place in black cases. You can change the location in the
• SOUND FORGE

  7 answers, most recent on 4/9/2026

  RE: Ozone elements says serial # wrong
  @Paul-Gaunt In addition to what @SP. has quite correctly written, please be aware that Sound Forge is now manufactured by BorisFX so all support requests should be directed to them. However, it is likely that the confirmation of purchase email you
• SOUND FORGE

  10 answers, most recent on 1/11/2025

  RE: GoPro Audio Problem - Any way to restore
  @browj2 Sounds like most of the full sound spectrum got squished/transposed into the frequencies above 10 kHz. I also tried to remove everything above 10 kHz but the remaining rest sounds thin and has many digital artifacts. Now it would be very
• Movie Studio

  15 answers, most recent on 7/20/2025

  RE: Playback Stutter MEP 2016 Plus
  @CarpentersMate Hi Mike. Using the same file or same portion of the same file a few times never seems to work for me. Better to have two identical files with different names seems to work for me much better. Whether this has something to do with how
• Movie Studio

  10 answers, most recent on 4/20/2025

  RE: Magix Movie Studio 2025 TRIAL
  @AnnTH Hi Ann. Overnight I have been thinking. It may be that the reason your builder didn't put in a different graphics card may be one of internal case space. Some of these cards can get quite large and because my own case is a tower case that is
• Movie Studio

  25 answers, most recent on 1/19/2023

  [Solved] Hotkeys to pause at current frame vs stop and return to last cursor
  I recently upgraded from Movie Studio Platinum v16 to 2023 on Windows 10. In previous versions, during editing, I could use the space bar to pause at the current frame, updating my cursor location, or I could press the enter key to stop and return