Search the MAGIX Community for tutorials, questions and solutions as well as for forum members

@Wayne-McIlvaine It could be... Zoom in to frame level and check the ending frame finishes exactly on a whole frame number. Sometimes files end at a point mid-frame eg at a half frame past the last full frame point. Here's an example. The left video

Movie Studio

32 answers, most recent on 4/2/2026

RE: Export quality from RTX Ti3060 far inferior to UHD770

@AAProds Hi Al The issue with the different end times is due to the MP3 audio being timing is frame based, frame has a fixed number of samples, 1152 per frame and if the sample rate is 44.1kHz, the audio frames are marginally out of sync and run

Movie Studio

9 answers, most recent on 5/28/2026

RE: Split video in to separete frames

@badbob @AAProds has given you the basics of the operation but, I have to ask: why would you want to do this? Given that video runs at 25 frames per second (PAL) or 29.97 frames per second (NTSC), a video of anything more than a few seconds is going

Movie Studio

5 answers, most recent on 2/23/2026

RE: Incorrect frame rate on AVI output, incorrect display of frame

@clement5 Hi AFAIK the difference in the number of frames is a result of where the video clip start/end boundarys are edited to in relation to the dropping frames sequence which is a result of converting from 24 fps. Converting 24fps to 23.97 fps,

Movie Studio

9 answers, most recent on 5/28/2026

RE: Split video in to separete frames

@emmrecs Hi Jeff, A video can be exported as a series of frames in one shot. Best to set a range first. File, Export Movie, Video as a sequence of frames. @badbob Hi, But why would you want to do this? What exactly do you want to do? If you just

Movie Studio

2 answers, most recent on 4/2/2026

Custom transition in Magix Movie Studio

Good Morning John I used your "Creating a transition from a video clip using the Mask Generator" and it works perfectly for me. I've made about 10 different transitions from that tutorial and that's more than enough for me. I don't need to buy that

Movie Studio

5 answers, most recent on 2/23/2026

RE: Incorrect frame rate on AVI output, incorrect display of frame

I carefully check the VirtualDub output as to the number of frames and the frame rate. I am now using VD2. The number of frames matches the original when changing the AVI. As to using another losless compressed formats, there are none others that

Movie Studio

46 answers, most recent on 1/28/2026

RE: BEWARE Latest Nvidia GTX 591.44 Drivers

@vdl-user-v19 Hi Using your import file I can reproduce the shaky export. Analysing the import file it has a Long GOP structure of 250 frames, ie there is only one I frame full image every 250 frames (approx 8.33 secs). Between the I frames are B

Video Pro X

9 answers, most recent on 1/20/2026

RE: No output option at 100fps for 4k-100fps video

@tom_frank Hi. Exported frame rates from video editors is often not a limitation of the editor but the codec used for export does not support those frame rates. Some video editors do not use some available codecs that may do as they quite likely

Movie Studio

4 answers, most recent on 7/17/2025

RE: [Solved] Video Deluxe 2026 Plus: Import of some videos trim the last 2 minutes

@DonL Hi This is a common issue with video files that are Variable Frame Rate (VFR), VDL 2026, like many other video editors does not always handle VFR video correctly especially when the Minimum and Maximum frame rate range is relatively

Movie Studio

3 answers, most recent on 11/27/2024

[Solved] Moving the scrubber frame by frame

I'm trying to make the jump from pinnacle studio over to movie studio 2024 . I am use to having a frame by frame option in the preview screen . i can not seem to find a option for doing this in MS. i have looked at tutorial video's ,looked through

Movie Studio

7 answers, most recent on 11/25/2024

[Solved] Text outside of the frame

I'm using Movie Studio 2025 Platinum and every time I create a mp4 file the "Text Scrolling" is outside the parameters of the video or the frame. While I'm making it, it's within the frame and the video image, but not after it's exported. Does

Movie Studio

13 answers, most recent on 5/15/2026

RE: MMS 2025: New AI Effects

@browj2 Hi John I have tested both RTX and iGPU exports with an 11 min 31s long Project in VPX 17, set up as you described above. The RTX export concluded with no crash, or error messages and played correctly.to the end. The iGPU rendered exported

Video Pro X

16 answers, most recent on 3/27/2025

[Solved] VPX16 Shot Match - How to (Help?!)

Luckily I have the MMS 2024 version of Shot Match to understand its concept. If I only had VPX16, I would have been completely lost! Note: VPX Shot Match is an enhanced version to MMS Shot Match - it has a very different interface and workflow. MMS

Video Pro X

9 answers, most recent on 1/20/2026

RE: No output option at 100fps for 4k-100fps video

My 3 year old Samsung 65 in. 4k smart TV will play my 1080p-120 fps and 720p-240 fps AVC or HEVC videos directly off my camerasas well as after editing. I usually only do trimming and minimal editing with comments on various frames for my personal

Movie Studio

20 answers, most recent on 1/13/2025

RE: [Solved] Exporting to mp4 desyncs the sound...

It turns out changing frame rate on export to mp4 actually did not fix it for anything longer than 1 minute. It was still causing all kinds of weird sound problems on longer videos. I discovered the only way to stop these problems was to make sure

Movie Studio

7 answers, most recent on 7/5/2025

RE: Selected Aspect Ratio Not Exporting

Hi @Peaceful-Pixel Is there any particular reason why you want to export at such a high frame rate? Typically, high frame rates such as 120 are shot with the intention of creating slow motion video with smooth playback. So, if you export your video

Movie Studio

48 answers, most recent on 9/29/2025

RE: Weird issue with using Smart Copy/Smart Render in MEP 2019 Premium

@AAProds - Progressive to Interlaced conversion. As requested here's a small zip file to download. https://drive.google.com/file/d/1d4vJujeRaRIq4xidmKM0vgwvJ1DA3RdR/view?usp=sharing It contains two 6 second files. Original Progressive mp4 and

Video Pro X

9 answers, most recent on 5/10/2025

[Solved] Export Glitches: One Black Frame?

I have been noticing these single black frames appearing during transitions between two clips over the past few months. They do not appear in the Timeline Preview - only appear in the final export. I believe they manifest themselves because of some

Movie Studio

4 answers, most recent on 9/11/2025

RE: Overlapping Frames

I looked at some of the Sharp comments. I don't understand why this hasn't been fixed in such a long time. It worked fine when it was MEP! I had tried sliding to ALL, but it didn't help. I don't know what else to tell you about the frames, it's

Movie Studio

5 answers, most recent on 2/23/2026

Incorrect frame rate on AVI output, incorrect display of frame

The AVI output uses a lossless compressed codec by default. I have videos in the standard US format 23.976 (24000/1001) But on output I can only coerce it to (23976/1000) which causes problems when matching videos after using other programs on the

Movie Studio

48 answers, most recent on 9/29/2025

RE: Weird issue with using Smart Copy/Smart Render in MEP 2019 Premium

@AAProds AAProds wrote on 9/24/2025, 11:05 PM @ericlnz The image isn't changed. The two fields are the same. It's just that they aren't taken from two periods in time but are from the same time. When read as an interlaced file (instead of

Rescue Your Videotapes!

7 answers, most recent on 12/19/2025

RE: Lines in digitized VHS

@MovieEditorr Did you deinterlace the recorded footage? Analog video images are saved in lines and only contain half of the full video frame. Each frame switches back and forth between even- and odd numbered lines. So, if you didn't deinterlace the