• Movie Studio

  47 answers, most recent on 8/24/2025

  RE: "Takes" functionality
  @Bol @johnebaker Ha! Lost in translation I think. Yes I meant 4TBs is not enough space. I shot just over 72 GBs of raw files last Saturday and that's without the resulting edited jpegs after. I was out again today but haven't as yet downloaded the
• SOUND FORGE

  6 answers, most recent on 8/5/2025

  RE: Having Problems With Sound Forge 17 Crashing Or Otherwise Not Working?
  It's a Dell Optiplex 7050 Micro so technically it's a desktop but not a conventional (large footprint) desktop. It has an Intel I7 quad-core 2.84 GHz processor with 32 Gb memory. The HDMI port is on the motherboard and it also has 2 display ports.
• Video Pro X

  8 answers, most recent on 11/27/2024

  VPX performance
  Hi, I must say that I am really happy with the very smooth timeline performance of VPX with HEVC files from my Panasonic G9. Off topic, but does anyone else find that shooting in HLG on the G9 produces shockingly clean low light video for a micro
• Movie Studio

  5 answers, most recent on 7/3/2025

  RE: Video and Audio not synching
  @Zaza_from_Johor Zaza, you need the "Object Stretch" mouse mode". Ungroup your audio from the video, then go into object-stretch mouse mode: Then go to the end of your audio and click-drag to achieve what you want. If the audio is running
• Samplitude

  4 answers, most recent on 4/15/2024

  RE: Any way to have smaller Transport Control Bar in Samplitude Pro X5
  @Thomas-Foley If you still want to use the Transport control window there are two options. You can shrink the size of the Transport control a little bit by collapsing the right side of it. There is a small triangle next to the Sync button. In the
• SOUND FORGE

  77 answers, most recent on 2/4/2026

  RE: SFPro continually crashes - versions 14-18
  Yeah, I'm all about making regular backups. Like they say, it's not a matter of when a hard drive will fail, it's when. The only thing on my C drive is the operating system and installed programs. All of the install files are on external drives
• Music Maker

  36 answers, most recent on 12/17/2025

  RE: Need help fixing magix..am losing hope
  ------------------System Information------------------      Time of this report: 3/22/2025, 22:20:56             Machine name: DRAGON               Machine Id:         Operating System: Windows 11 Home 64-bit (10.0, Build 26100)
• Music Maker

  7 answers, most recent on 3/16/2024

  RE: Connecting midi Bluetooth instrument to use in Music Maker
  @William-Middleton Ok. then you need to check the manual or the online help of Casio. You probably need to install a MIDI driver first or connect your keyboard with an USB cable, so that "Casio USB MIDI" is availabe. Yes, indeed it does work with
• Movie Studio

  25 answers, most recent on 10/22/2023

  RE: Movie Studio 2023 freezing with 4K input
  TA BaseBoard Manufacturer  Micro-Star International Co., Ltd.BaseBoard Product           Z590-A PRO (MS-7D09)BaseBoard Version           1.0 I'll follow it up but probably not until sometime tomorrow!Stephen
• Movie Studio

  10 answers, most recent on 5/23/2024

  RE: Guidance for Sony cameras outputting MXF containers w/ XAVC
  I'm using a Canon XF200 video cam. It's native format is MXF on CF memory sticks. One of the settings is to record MP4 on a micro SD card. I recently shot some video and forgot to set the MP4 option. Now I have to convert the MXF files to a format
• Movie Studio

  4 answers, most recent on 11/8/2023

  RE: Nothing shows in TimeLine Mode but does show in StoryBoard Mode
  Before reading this I tried loading rerunning Magix, yes, Movie Edit Pro Plus ( can't keep track of the various versions of Pro, Pluses, etc), again. To no avail. I did look up and down the tracks and left to right but there was nothing. I did
• Video Pro X

  5 answers, most recent on 2/1/2024

  RE: VPX15 with long project
  @Betovalle Hi Roberto, Sorry, I left this too long. Features that I use in VPX not in MMS: Source Monitor - thus 2 monitors, Preview and Source Meters (available in the Source Monitor) - Vectorscope, Histogram, RGB Parade, Waveform monitor - you
• Movie Studio

  51 answers, most recent on 1/30/2024

  RE: Dual Layer DVDs - atrocious luck or is just my project
  internal dvd driveHL-DT-ST DVDRAMGUD0N external drive        dvd writer, plug in, no installation files requiredLite-on It corp.Slimtype eUA108   5 USB Device* usb 2.0, cord hard wired, i use a half metre extension due to the 10 cm length external
• Music Maker

  6 answers, most recent on 12/27/2022

  [Solved] (FIXED) Upgraded from MM 2022 Prem to 2023 Prem. Slow Response
  Upgraded from 2022 (2022 version was working fine) to 2023 and now slow to unresponsive for minutes at a time per click making it useless in addition to Store sync taking forever. The following Troubleshooting was applied with no change in
• ACID

  No answers, created on 5/12/2023

  Clip properties. Events -Length of Note?
  When using MIDI Files I find online, sometimes the Bass Drum MIDI Note is merely a fraction of time trigger.Is there a way to stretch a note from a Skilly-Second to something like a Micro-Second, so that its possible to place the cursor onto the
• Movie Studio

  17 answers, most recent on 10/30/2023

  RE: When I play the red line on the video blocks is not on the right spot
  Thank you John and Gid, but that doesn't solve the problem. I work to cut or shorten scenes only in Story Board and not in Timeline mode because that's way too cumbersome compared to the Story Board. 1. In a directory, I put my unedited video clips
• Music Maker

  2 answers, most recent on 6/15/2020

  [Solved] Why can I only hear the left channel of my micro?
  I made a song in Music Maker and now I want to add the vocals. I created an audio track (configurated it as a mono track) for the vocals and I use a Rode micro that I connect to my Focusrite 4|4 Scarlett audio interface. I can hear my voice loud and
• Movie Studio

  11 answers, most recent on 8/3/2023

  RE: Capturing/Importing 1080 from a 'P2 Card' Panasonic HVX200
  @CarpentersMate Hi Mike . . . . "If you have a P2 Store" You were referring to additional P2 cards used as STORAGE? . . . . I was referring to the external USB drive / P2 card reader device for which the software you linked to can be used. I had a
• Movie Studio

  4 answers, most recent on 11/8/2023

  RE: Nothing shows in TimeLine Mode but does show in StoryBoard Mode
  @browj2 I actually think for a guy closer to 100 than 50, I do okay with overseas travel and Magix. 😁 I did not reinstall the program. I closed and reopened it a few times and reloaded the project. Did nothing to fix the missing TimeLine. I then
• Movie Studio

  4 answers, most recent on 11/8/2023

  RE: Nothing shows in TimeLine Mode but does show in StoryBoard Mode
  @FF22 Hi, I did look up and down the tracks and left to right but there was nothing. I did notice some small symbol or micro thingies. Just at the top of the TimeLine window almost at the extreme left. They appeared/disappeared as I moved the marker
• Movie Studio

  34 answers, most recent on 1/5/2023

  RE: Movie Studio 2022 on offer at HumbleBundle
  @browj2 Actually, this is the best made one. Fully adjustable. Ray.
• Movie Studio

  No answers, created on 10/25/2024

  problem with Magix Capture
  Hi, I have problems to with the capture program. When I select the input from camera (Using Movies on DVD usb tools) the program crash. '   See the added info below   <?xml version="1.0" encoding="UTF-16"?><WERReportMetadata>  
• Movie Studio

  50 answers, most recent on 10/20/2023

  RE: Help selecting a new PC
  Well thanks to all your feedback I have just modified my "trial" dog walk video. My new Mic arrived today and that works well...so one problem solved!! Its a HyperX Solocast. Based on feedback here I have set my project at 1080/50fps and rendered at
• SOUND FORGE

  4 answers, most recent on 10/19/2022

  Sound Forge 16: Trend Micro blocks VST scanner as RANSOMWARE
  When I installed Sound Forge 16 (Windows 10), Trend Micro Antivirus blocked the VST plugin scanner as RANSOMWARE, and even said that my files had been encrypted and I'd need to restart to fix it. (It did appear to be a real Trend Micro pop-up, not