Abruch beim DVD brennen,

trucks schrieb am 14.08.2012 um 18:15 Uhr

Hallo,

ich benutze Video Pro X 4 und habe einen 30 Min. Film Fertiggestellt.'
Beim Brennen wird der Film vollständig decodiert.
Beim Brennen wird der Titel gebrannt, dann erfolgt der Abbruch" Brennerfehler."
Da der Rohling nicht wiederbeschreibbar ist , ist die DVD hinüber.
Ich habe verschiedene Rohlinge erprobt.
Keine Änderung.
Eine Filmwiedergabe in MPEG ist problemlos möglich.
Mit anderen Programmen , Nero, ist das Brennen mit dem Brenner anderer Projekte ohne Weiteres möglich.
 Win 7.Prozessor Intel I7 3,4 GHz,  6 Gb RAM
Günter Trucks
 

Kommentare

Ehemaliger User schrieb am 14.08.2012 um 18:39 Uhr

Hallo,

Da der Rohling nicht wiederbeschreibbar ist , ist die DVD hinüber.

nichts draus gelernt?

Abhilfe: Wiederbeschreibbare Rohlinge zum Testen verwenden bzw. Immage brennen. Damit die Experten dir helfen können, bitte die dbk logdatei hier einstellen und mehr Infos preisgeben.

Gruß,

zonaroma

marion51 schrieb am 14.08.2012 um 18:50 Uhr

und wenn du nero hast, unbedingt "incd" deaktivieren.

darüberhinaus stelle dein vollständiges fehlerprotokoll hier ein.

gruß

trucks schrieb am 15.08.2012 um 10:31 Uhr


-------------------------- 13.03.2012 11:37:39 --------------------------

13.03.2012 11:37:39.665:   DLLAV32.DLL loaded, all entry points available
13.03.2012 11:37:39.665:   AVSDK MsgCbFunc registered
13.03.2012 11:37:39.665:   AVSDK: StatCbFunc registered
13.03.2012 11:37:39.712:   AVSDK Version 9.0.193
13.03.2012 11:37:39.712:   ------------ Reading Device Info ----------------
13.03.2012 11:37:39.712:   AVSDK: 2 device(s) found
13.03.2012 11:37:39.728:   BurnSupport: 2 device(s) found
13.03.2012 11:37:39.728:   Adapter=0  ID=1  LUN=0   X:PIONEER BD-RW   BDR-203 Revision:1.05
13.03.2012 11:37:39.728:   Adapter=1  ID=0  LUN=16   Y:TSSTcorp CDDVDW SH-222AL Revision:SB00
13.03.2012 11:37:39.728:   BurnSupport: 2 record device(s) available
13.03.2012 11:37:39.728:   BurnSupport: X: PIONEER BD-RW   BDR-203 Rev. 1.05
13.03.2012 11:37:39.728:   BurnSupport: Y: TSSTcorp CDDVDW SH-222AL Rev. SB00
13.03.2012 11:37:39.728:   ------------ done ----------------

-------------------------- 13.03.2012 11:55:41 --------------------------

13.03.2012 11:55:41.116:   DLLAV32.DLL loaded, all entry points available
13.03.2012 11:55:41.117:   AVSDK MsgCbFunc registered
13.03.2012 11:55:41.117:   AVSDK: StatCbFunc registered
13.03.2012 11:55:41.198:   AVSDK Version 9.0.193
13.03.2012 11:55:41.198:   ------------ Reading Device Info ----------------
13.03.2012 11:55:41.198:   AVSDK: 2 device(s) found
13.03.2012 11:55:41.199:   BurnSupport: 2 device(s) found
13.03.2012 11:55:41.199:   Adapter=0  ID=1  LUN=0   X:PIONEER BD-RW   BDR-203 Revision:1.05
13.03.2012 11:55:41.199:   Adapter=1  ID=0  LUN=16   Y:TSSTcorp CDDVDW SH-222AL Revision:SB00
13.03.2012 11:55:41.199:   BurnSupport: 2 record device(s) available
13.03.2012 11:55:41.200:   BurnSupport: X: PIONEER BD-RW   BDR-203 Rev. 1.05
13.03.2012 11:55:41.200:   BurnSupport: Y: TSSTcorp CDDVDW SH-222AL Rev. SB00
13.03.2012 11:55:41.200:   ------------ done ----------------

-------------------------- 12.08.2012 10:12:34 --------------------------

12.08.2012 10:12:34.165:   DLLAV32.DLL loaded, all entry points available
12.08.2012 10:12:34.165:   AVSDK MsgCbFunc registered
12.08.2012 10:12:34.165:   AVSDK: StatCbFunc registered
12.08.2012 10:12:34.271:   AVSDK Version 9.0.193
12.08.2012 10:12:34.271:   ------------ Reading Device Info ----------------
12.08.2012 10:12:34.271:   AVSDK: 2 device(s) found
12.08.2012 10:12:34.272:   BurnSupport: 2 device(s) found
12.08.2012 10:12:34.272:   Adapter=0  ID=1  LUN=0   X:PIONEER BD-RW   BDR-203 Revision:1.05
12.08.2012 10:12:34.272:   Adapter=1  ID=0  LUN=16   Y:TSSTcorp CDDVDW SH-222AL Revision:SB00
12.08.2012 10:12:34.273:   BurnSupport: 2 record device(s) available
12.08.2012 10:12:34.273:   BurnSupport: X: PIONEER BD-RW   BDR-203 Rev. 1.05
12.08.2012 10:12:34.273:   BurnSupport: Y: TSSTcorp CDDVDW SH-222AL Rev. SB00
12.08.2012 10:12:34.274:   ------------ done ----------------
12.08.2012 10:12:34.530:   setting no speed limit
12.08.2012 10:12:34.531:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
12.08.2012 10:13:02.808:   Open Project: Spitzbergen_3 -- dvd project 2012-08-12
12.08.2012 10:13:02.808:   VideoMode: PAL   Temp Dir: I:\
12.08.2012 10:13:02.809:   dll version 4.8.4.0
12.08.2012 10:13:02.812:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
12.08.2012 10:13:02.812:   EstimateLayerSplitPoint()...
12.08.2012 10:13:02.897:   Splitpunkt 4271833088 auf Disk mit Größe 1878228992
12.08.2012 10:13:02.897:   Title an Stelle 0, Länge 131072, Typ 0
12.08.2012 10:13:02.897:   Title an Stelle 131072, Länge 131072, Typ 0
12.08.2012 10:13:02.898:   Title an Stelle 262144, Länge 1877966848, Typ 1
12.08.2012 10:13:02.898:   ... Split möglich nach aktuellem Title, -> Abbruch
12.08.2012 10:13:02.899:   Step 1 of 5, Encodiere Film 1 ...
12.08.2012 10:46:52.595:   Step 1 done
12.08.2012 10:46:52.599:   Step 2 of 5, Encodiere Filmmenü ...
12.08.2012 10:46:52.930:   Step 2 done
12.08.2012 10:46:52.932:   Step 3 of 5, Encodiere Kapitelmenü 1 ...
12.08.2012 10:46:52.933:   Step 3 done
12.08.2012 10:46:52.936:   ConvertMovie() - encoded file: I:\DVD Image Spitzbergen_3\VTS_01_1.VOB
12.08.2012 10:46:52.936:   ConvertMovie() - encoded file: I:\DVD Image Spitzbergen_3\VTS_01_2.VOB
12.08.2012 10:46:52.981:   Step 4 of 5, Disc Image wird erzeugt...
12.08.2012 10:46:57.855:   Step 4 done
12.08.2012 10:47:04.062:   Step 5 of 5
12.08.2012 10:47:04.064:   Step 5 done
12.08.2012 10:47:04.068:   requested recorder feature:
12.08.2012 10:47:04.068:    cache size:       16,000000.1 MB
12.08.2012 10:47:04.068:    write speed:      5410,156250.1 KB/s
12.08.2012 10:47:04.069:    book type:        0
12.08.2012 10:47:04.069:    burn over:        no
12.08.2012 10:47:04.069:    simulate:         no
12.08.2012 10:47:04.070:    disc at once:     no
12.08.2012 10:47:04.070:    burn proof:       yes
12.08.2012 10:47:04.070:    format disc:      no
12.08.2012 10:47:04.071:    short leadout:    no
12.08.2012 10:47:04.071:    no defect mgmt:   no
12.08.2012 10:47:04.071:    verify after burn:no
12.08.2012 10:47:04.071:   ------------ OpenRecorderSetOptions Point ----------------
12.08.2012 10:47:04.203:   setting PoINT cache size to 16777216l
12.08.2012 10:47:04.203:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
12.08.2012 10:47:04.204:    Booktype: don't care
12.08.2012 10:47:04.212:   setting write speed to 5540000  bytes/sec
12.08.2012 10:47:04.213:   this equals 4,000000x DVD / 31,405895x CD Speed
12.08.2012 10:47:04.213:   ------------ done: succeeded ----------------
12.08.2012 10:47:04.213:   ------------ CreateAPIProject ----------------
12.08.2012 10:47:04.215:   Step 5 of 5
12.08.2012 10:47:04.217:   creating DVD project in prepfile mode...
12.08.2012 10:47:04.220:   create volume... OK
12.08.2012 10:47:04.220:   verify option OFF
12.08.2012 10:47:04.220:   set project options... OK
12.08.2012 10:47:04.221:   adding file "I:\DVD Image Spitzbergen_3\VIDEO_TS.IFO"
12.08.2012 10:47:04.223:   adding file "I:\DVD Image Spitzbergen_3\VIDEO_TS.VOB"
12.08.2012 10:47:04.224:   adding file "I:\DVD Image Spitzbergen_3\VTS_01_1.VOB"
12.08.2012 10:47:04.226:   adding file "I:\DVD Image Spitzbergen_3\VTS_01_2.VOB"
12.08.2012 10:47:04.227:   adding file "I:\DVD Image Spitzbergen_3\VTS_01_0.IFO"
12.08.2012 10:47:04.229:   Step 5 done
12.08.2012 10:47:04.229:   ------------ done ----------------
12.08.2012 10:47:04.230:   Step 5 of 5
12.08.2012 10:47:04.231:   ------------ BurnToDisc ----------------
12.08.2012 10:47:04.232:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
12.08.2012 10:47:04.233:    Booktype: don't care
12.08.2012 10:47:04.233:   setting write speed to 5540000  bytes/sec
12.08.2012 10:47:04.233:   this equals 4,000000x DVD / 31,405895x CD Speed
12.08.2012 10:47:04.233:   mounting volume on device...OK
12.08.2012 10:47:04.234:   Check on previously direct recorded session...OK
12.08.2012 10:47:04.234:   -- Volume mounted --
12.08.2012 10:47:04.234:   -- Recording on "X: PIONEER BD-RW   BDR-203" --
12.08.2012 10:47:04.234:   -- Medium is "DVD-R" --
12.08.2012 10:47:04.234:   -- Manufacturer "MCC 03RG20" --
12.08.2012 10:47:04.291:   AVSDK Message - INFO: :Recording volume ...
12.08.2012 10:47:04.292:   AVSDK Status - Begin operation Recording 862544 sectors/frames
12.08.2012 10:47:04.294:   AVSDK Message - INFO: :Recording -> writing data ...
12.08.2012 10:47:26.202:   wrote LeadIn, start DataCopy
12.08.2012 10:48:16.427:   AVSDK Message - ERROR: :Cannot write to disc -> Logical block address out of range (SK/ASC/ASCQ 05/21/02)
12.08.2012 10:48:26.663:   AVSDK Status - End operation Recording 862544 sectors/frames
12.08.2012 10:48:26.663:   AVSDK Message - INFO: :Recording failed due to write error on disc
12.08.2012 10:48:26.664:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 206 - write error occurred on disc !!!
12.08.2012 10:48:26.664:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 224 - write error occurred on disc !!!
12.08.2012 10:48:26.664:   ------------ done ----------------
12.08.2012 10:48:26.665:   Step 5 done
12.08.2012 10:48:26.666:   project burning failed
12.08.2012 10:48:26.674:   !!! DBK error in CBurnDevSupport::BurnProject(): 224 - write error occurred on disc !!!
12.08.2012 10:48:26.677:   !!! DBK error in BurnProject: 224 - write error occurred on disc !!!
12.08.2012 10:50:03.545:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive x:
12.08.2012 10:50:03.545:    DEVICE REMOVAL
12.08.2012 10:51:48.823:   Open Project: Spitzbergen_3 -- dvd project 2012-08-12
12.08.2012 10:51:48.823:   VideoMode: PAL   Temp Dir: I:\Spitzbergen 07.12\Film\
12.08.2012 10:51:48.824:   dll version 4.8.4.0
12.08.2012 10:51:48.825:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
12.08.2012 10:51:48.825:   EstimateLayerSplitPoint()...
12.08.2012 10:51:48.896:   Splitpunkt 4271833088 auf Disk mit Größe 1878228992
12.08.2012 10:51:48.896:   Title an Stelle 0, Länge 131072, Typ 0
12.08.2012 10:51:48.896:   Title an Stelle 131072, Länge 131072, Typ 0
12.08.2012 10:51:48.897:   Title an Stelle 262144, Länge 1877966848, Typ 1
12.08.2012 10:51:48.897:   ... Split möglich nach aktuellem Title, -> Abbruch
12.08.2012 10:51:48.898:   Step 1 of 4, Encodiere Film 1 ...
12.08.2012 11:28:02.039:   Step 1 done
12.08.2012 11:28:02.041:   Step 2 of 4, Encodiere Filmmenü ...
12.08.2012 11:28:02.320:   Step 2 done
12.08.2012 11:28:02.321:   Step 3 of 4, Encodiere Kapitelmenü 1 ...
12.08.2012 11:28:02.322:   Step 3 done
12.08.2012 11:28:02.326:   ConvertMovie() - encoded file: I:\Spitzbergen 07.12\Film\VTS_01_1.VOB
12.08.2012 11:28:02.326:   ConvertMovie() - encoded file: I:\Spitzbergen 07.12\Film\VTS_01_2.VOB
12.08.2012 11:28:02.363:   Step 4 of 4, Disc Image wird erzeugt...
12.08.2012 11:28:07.230:   Step 4 done
12.08.2012 11:40:43.711:   setting no speed limit
12.08.2012 11:42:44.533:   Open Project: Spitzbergen_3 -- dvd project 2012-08-12
12.08.2012 11:42:44.534:   VideoMode: PAL   Temp Dir: I:\
12.08.2012 11:42:44.534:   dll version 4.8.4.0
12.08.2012 11:42:44.537:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
12.08.2012 11:42:44.538:   EstimateLayerSplitPoint()...
12.08.2012 11:42:44.636:   Splitpunkt 4271833088 auf Disk mit Größe 2214035456
12.08.2012 11:42:44.636:   Title an Stelle 0, Länge 131072, Typ 0
12.08.2012 11:42:44.636:   Title an Stelle 131072, Länge 131072, Typ 0
12.08.2012 11:42:44.637:   Title an Stelle 262144, Länge 2213773312, Typ 1
12.08.2012 11:42:44.637:   ... Split möglich nach aktuellem Title, -> Abbruch
12.08.2012 11:42:56.375:   Step 1 of 5, Encodiere Film 1 ...
12.08.2012 11:42:56.473:   Step 1 done
12.08.2012 11:42:56.475:   ConvertMovie() - encoded file: I:\DVD Image Spitzbergen_3\VTS_01_1.VOB
12.08.2012 11:42:56.475:   ConvertMovie() - encoded file: I:\DVD Image Spitzbergen_3\VTS_01_2.VOB
12.08.2012 11:42:56.509:   Step 2 of 5, Disc Image wird erzeugt...
12.08.2012 11:42:56.510:   Step 2 done
12.08.2012 11:42:58.925:   Step 3 of 5
12.08.2012 11:42:58.926:   Step 3 done
12.08.2012 11:42:58.930:   requested recorder feature:
12.08.2012 11:42:58.930:    cache size:       16,000000.1 MB
12.08.2012 11:42:58.930:    write speed:      5410,156250.1 KB/s
12.08.2012 11:42:58.931:    book type:        0
12.08.2012 11:42:58.931:    burn over:        no
12.08.2012 11:42:58.931:    simulate:         no
12.08.2012 11:42:58.932:    disc at once:     no
12.08.2012 11:42:58.932:    burn proof:       yes
12.08.2012 11:42:58.932:    format disc:      no
12.08.2012 11:42:58.932:    short leadout:    no
12.08.2012 11:42:58.933:    no defect mgmt:   no
12.08.2012 11:42:58.933:    verify after burn:no
12.08.2012 11:42:58.933:   ------------ OpenRecorderSetOptions Point ----------------
12.08.2012 11:42:59.055:   setting PoINT cache size to 16777216l
12.08.2012 11:42:59.056:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
12.08.2012 11:42:59.056:    Booktype: don't care
12.08.2012 11:42:59.066:   setting write speed to 5540000  bytes/sec
12.08.2012 11:42:59.067:   this equals 4,000000x DVD / 31,405895x CD Speed
12.08.2012 11:42:59.067:   ------------ done: succeeded ----------------
12.08.2012 11:42:59.067:   ------------ CreateAPIProject ----------------
12.08.2012 11:42:59.069:   Step 4 of 5
12.08.2012 11:42:59.071:   creating DVD project in prepfile mode...
12.08.2012 11:42:59.074:   create volume... OK
12.08.2012 11:42:59.074:   verify option OFF
12.08.2012 11:42:59.075:   set project options... OK
12.08.2012 11:42:59.090:   adding file "I:\DVD Image Spitzbergen_3\VIDEO_TS.IFO"
12.08.2012 11:42:59.104:   adding file "I:\DVD Image Spitzbergen_3\VIDEO_TS.VOB"
12.08.2012 11:42:59.120:   adding file "I:\DVD Image Spitzbergen_3\VTS_01_1.VOB"
12.08.2012 11:42:59.130:   adding file "I:\DVD Image Spitzbergen_3\VTS_01_2.VOB"
12.08.2012 11:42:59.137:   adding file "I:\DVD Image Spitzbergen_3\VTS_01_0.IFO"
12.08.2012 11:42:59.139:   Step 4 done
12.08.2012 11:42:59.140:   ------------ done ----------------
12.08.2012 11:42:59.141:   Step 5 of 5
12.08.2012 11:42:59.142:   ------------ BurnToDisc ----------------
12.08.2012 11:42:59.144:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
12.08.2012 11:42:59.145:    Booktype: don't care
12.08.2012 11:42:59.145:   setting write speed to 5540000  bytes/sec
12.08.2012 11:42:59.145:   this equals 4,000000x DVD / 31,405895x CD Speed
12.08.2012 11:42:59.146:   mounting volume on device...OK
12.08.2012 11:42:59.146:   Check on previously direct recorded session...OK
12.08.2012 11:42:59.146:   -- Volume mounted --
12.08.2012 11:42:59.147:   -- Recording on "X: PIONEER BD-RW   BDR-203" --
12.08.2012 11:42:59.147:   -- Medium is "DVD-R" --
12.08.2012 11:42:59.147:   -- Manufacturer "MCC 03RG20" --
12.08.2012 11:42:59.197:   AVSDK Message - INFO: :Recording volume ...
12.08.2012 11:42:59.197:   AVSDK Status - Begin operation Recording 862544 sectors/frames
12.08.2012 11:42:59.199:   AVSDK Message - INFO: :Recording -> writing data ...
12.08.2012 11:42:59.310:   wrote LeadIn, start DataCopy
12.08.2012 11:43:50.373:   AVSDK Message - ERROR: :Cannot write to disc -> Logical block address out of range (SK/ASC/ASCQ 05/21/02)
12.08.2012 11:44:00.599:   AVSDK Status - End operation Recording 862544 sectors/frames
12.08.2012 11:44:00.600:   AVSDK Message - INFO: :Recording failed due to write error on disc
12.08.2012 11:44:00.600:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 206 - write error occurred on disc !!!
12.08.2012 11:44:00.601:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 224 - write error occurred on disc !!!
12.08.2012 11:44:00.601:   ------------ done ----------------
12.08.2012 11:44:00.602:   Step 5 done
12.08.2012 11:44:00.603:   project burning failed
12.08.2012 11:44:00.611:   !!! DBK error in CBurnDevSupport::BurnProject(): 224 - write error occurred on disc !!!
12.08.2012 11:44:00.612:   !!! DBK error in BurnProject: 224 - write error occurred on disc !!!
12.08.2012 11:55:51.545:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive x:
12.08.2012 11:55:51.545:    DEVICE REMOVAL
12.08.2012 11:57:00.162:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive x:
12.08.2012 11:57:00.163:    DEVICE ARRIVED
12.08.2012 11:57:00.896:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
12.08.2012 13:41:51.844:   setting no speed limit
12.08.2012 13:41:51.893:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
12.08.2012 13:41:51.893:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
12.08.2012 13:41:51.893:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
12.08.2012 13:42:16.734:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
12.08.2012 13:42:16.734:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
12.08.2012 13:42:16.735:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
12.08.2012 13:42:16.841:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
12.08.2012 13:42:16.841:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
12.08.2012 13:42:16.841:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
12.08.2012 13:43:06.940:   Open Project: Spitzbergen_3 -- dvd project 2012-08-12
12.08.2012 13:43:06.940:   VideoMode: PAL   Temp Dir: I:\
12.08.2012 13:43:06.941:   dll version 4.8.4.0
12.08.2012 13:43:06.944:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
12.08.2012 13:43:06.944:   EstimateLayerSplitPoint()...
12.08.2012 13:43:07.033:   Splitpunkt 4271833088 auf Disk mit Größe 2214035456
12.08.2012 13:43:07.034:   Title an Stelle 0, Länge 131072, Typ 0
12.08.2012 13:43:07.034:   Title an Stelle 131072, Länge 131072, Typ 0
12.08.2012 13:43:07.034:   Title an Stelle 262144, Länge 2213773312, Typ 1
12.08.2012 13:43:07.034:   ... Split möglich nach aktuellem Title, -> Abbruch
12.08.2012 13:43:14.262:   Step 1 of 5, Encodiere Film 1 ...
12.08.2012 13:43:14.350:   Step 1 done
12.08.2012 13:43:14.352:   ConvertMovie() - encoded file: I:\DVD Image Spitzbergen_3\VTS_01_1.VOB
12.08.2012 13:43:14.352:   ConvertMovie() - encoded file: I:\DVD Image Spitzbergen_3\VTS_01_2.VOB
12.08.2012 13:43:14.389:   Step 2 of 5, Disc Image wird erzeugt...
12.08.2012 13:43:14.390:   Step 2 done
12.08.2012 13:43:16.798:   Step 3 of 5
12.08.2012 13:43:16.799:   Step 3 done
12.08.2012 13:43:16.802:   requested recorder feature:
12.08.2012 13:43:16.802:    cache size:       16,000000.1 MB
12.08.2012 13:43:16.802:    write speed:      2705,078125.1 KB/s
12.08.2012 13:43:16.802:    book type:        0
12.08.2012 13:43:16.803:    burn over:        no
12.08.2012 13:43:16.803:    simulate:         no
12.08.2012 13:43:16.803:    disc at once:     no
12.08.2012 13:43:16.804:    burn proof:       yes
12.08.2012 13:43:16.804:    format disc:      no
12.08.2012 13:43:16.804:    short leadout:    no
12.08.2012 13:43:16.805:    no defect mgmt:   no
12.08.2012 13:43:16.805:    verify after burn:no
12.08.2012 13:43:16.805:   ------------ OpenRecorderSetOptions Point ----------------
12.08.2012 13:43:16.927:   setting PoINT cache size to 16777216l
12.08.2012 13:43:16.927:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
12.08.2012 13:43:16.928:    Booktype: don't care
12.08.2012 13:43:16.928:   setting write speed to 2770000  bytes/sec
12.08.2012 13:43:16.928:   this equals 2,000000x DVD / 15,702948x CD Speed
12.08.2012 13:43:16.929:   ------------ done: succeeded ----------------
12.08.2012 13:43:16.929:   ------------ CreateAPIProject ----------------
12.08.2012 13:43:16.930:   Step 4 of 5
12.08.2012 13:43:16.932:   creating DVD project in prepfile mode...
12.08.2012 13:43:16.936:   create volume... OK
12.08.2012 13:43:16.936:   verify option OFF
12.08.2012 13:43:16.936:   set project options... OK
12.08.2012 13:43:16.947:   adding file "I:\DVD Image Spitzbergen_3\VIDEO_TS.IFO"
12.08.2012 13:43:16.959:   adding file "I:\DVD Image Spitzbergen_3\VIDEO_TS.VOB"
12.08.2012 13:43:16.968:   adding file "I:\DVD Image Spitzbergen_3\VTS_01_1.VOB"
12.08.2012 13:43:16.983:   adding file "I:\DVD Image Spitzbergen_3\VTS_01_2.VOB"
12.08.2012 13:43:16.994:   adding file "I:\DVD Image Spitzbergen_3\VTS_01_0.IFO"
12.08.2012 13:43:16.996:   Step 4 done
12.08.2012 13:43:16.997:   ------------ done ----------------
12.08.2012 13:43:16.997:   Step 5 of 5
12.08.2012 13:43:16.998:   ------------ BurnToDisc ----------------
12.08.2012 13:43:17.000:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
12.08.2012 13:43:17.000:    Booktype: don't care
12.08.2012 13:43:17.001:   setting write speed to 2770000  bytes/sec
12.08.2012 13:43:17.001:   this equals 2,000000x DVD / 15,702948x CD Speed
12.08.2012 13:43:17.001:   mounting volume on device...OK
12.08.2012 13:43:17.001:   Check on previously direct recorded session...OK
12.08.2012 13:43:17.002:   -- Volume mounted --
12.08.2012 13:43:17.002:   -- Recording on "X: PIONEER BD-RW   BDR-203" --
12.08.2012 13:43:17.002:   -- Medium is "DVD-RW" --
12.08.2012 13:43:17.002:   -- Manufacturer "RITEKW01" --
12.08.2012 13:43:17.053:   AVSDK Message - INFO: :Recording volume ...
12.08.2012 13:43:17.053:   AVSDK Status - Begin operation Recording 862544 sectors/frames
12.08.2012 13:43:17.055:   AVSDK Message - INFO: :Recording -> writing data ...
12.08.2012 13:43:17.147:   wrote LeadIn, start DataCopy
12.08.2012 13:44:20.046:   AVSDK Message - ERROR: :Cannot write to disc -> Logical block address out of range (SK/ASC/ASCQ 05/21/02)
12.08.2012 13:44:30.275:   AVSDK Status - End operation Recording 862544 sectors/frames
12.08.2012 13:44:30.275:   AVSDK Message - INFO: :Recording failed due to write error on disc
12.08.2012 13:44:30.276:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 206 - write error occurred on disc !!!
12.08.2012 13:44:30.276:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 224 - write error occurred on disc !!!
12.08.2012 13:44:30.276:   ------------ done ----------------
12.08.2012 13:44:30.277:   Step 5 done
12.08.2012 13:44:30.279:   project burning failed
12.08.2012 13:44:30.287:   !!! DBK error in CBurnDevSupport::BurnProject(): 224 - write error occurred on disc !!!
12.08.2012 13:44:30.287:   !!! DBK error in BurnProject: 224 - write error occurred on disc !!!
12.08.2012 13:49:41.545:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive x:
12.08.2012 13:49:41.545:    DEVICE REMOVAL
12.08.2012 13:50:07.812:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/02)
12.08.2012 13:50:07.813:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
12.08.2012 13:50:07.813:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
12.08.2012 13:50:43.672:   AVSDK Message - ERROR: :Cannot perform device control function -> access denied
12.08.2012 13:50:43.673:   !!! AVSDK error: OpenCloseTray() calling AvDevControl(): 5 - request not allowed !!!
12.08.2012 13:50:43.681:   AVSDK Message - ERROR: :Cannot open drive -> error code 14
12.08.2012 13:50:43.682:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 3 - bad address given as parameter !!!
12.08.2012 13:50:43.682:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 202 - bad address given as parameter !!!
12.08.2012 13:50:43.771:   AVSDK Message - ERROR: :Cannot perform device control function -> access denied
12.08.2012 13:50:43.771:   !!! AVSDK error: OpenCloseTray() calling AvDevControl(): 5 - request not allowed !!!
12.08.2012 13:50:43.776:   AVSDK Message - ERROR: :Cannot open drive -> error code 14
12.08.2012 13:50:43.776:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 3 - bad address given as parameter !!!
12.08.2012 13:50:43.776:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 202 - bad address given as parameter !!!
12.08.2012 13:50:44.174:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
12.08.2012 13:51:14.155:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
12.08.2012 13:51:17.166:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
12.08.2012 13:51:17.271:   AVSDK Status - Begin operation Erasing disc
12.08.2012 13:52:24.646:   AVSDK Status - End operation Erasing disc
12.08.2012 13:52:29.327:   Open Project: Spitzbergen_3 -- dvd project 2012-08-12
12.08.2012 13:52:29.328:   VideoMode: PAL   Temp Dir: I:\
12.08.2012 13:52:29.328:   dll version 4.8.4.0
12.08.2012 13:52:29.331:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
12.08.2012 13:52:29.331:   EstimateLayerSplitPoint()...
12.08.2012 13:52:29.428:   Splitpunkt 4271833088 auf Disk mit Größe 2214035456
12.08.2012 13:52:29.428:   Title an Stelle 0, Länge 131072, Typ 0
12.08.2012 13:52:29.429:   Title an Stelle 131072, Länge 131072, Typ 0
12.08.2012 13:52:29.429:   Title an Stelle 262144, Länge 2213773312, Typ 1
12.08.2012 13:52:29.429:   ... Split möglich nach aktuellem Title, -> Abbruch
12.08.2012 13:52:36.828:   ERROR: PrepareDVDVideoFiles() failed with errNo 11 - user cancelled
12.08.2012 13:52:36.829:   !!! DBK error in BurnProject: 1 - user cancelled operation !!!

-------------------------- 14.08.2012 18:16:40 --------------------------

14.08.2012 18:16:40.030:   DLLAV32.DLL loaded, all entry points available
14.08.2012 18:16:40.031:   AVSDK MsgCbFunc registered
14.08.2012 18:16:40.031:   AVSDK: StatCbFunc registered
14.08.2012 18:16:40.132:   AVSDK Version 9.0.193
14.08.2012 18:16:40.132:   ------------ Reading Device Info ----------------
14.08.2012 18:16:40.132:   AVSDK: 2 device(s) found
14.08.2012 18:16:40.133:   BurnSupport: 2 device(s) found
14.08.2012 18:16:40.133:   Adapter=0  ID=1  LUN=0   X:PIONEER BD-RW   BDR-203 Revision:1.05
14.08.2012 18:16:40.133:   Adapter=1  ID=0  LUN=16   Y:TSSTcorp CDDVDW SH-222AL Revision:SB00
14.08.2012 18:16:40.133:   BurnSupport: 2 record device(s) available
14.08.2012 18:16:40.133:   BurnSupport: X: PIONEER BD-RW   BDR-203 Rev. 1.05
14.08.2012 18:16:40.134:   BurnSupport: Y: TSSTcorp CDDVDW SH-222AL Rev. SB00
14.08.2012 18:16:40.134:   ------------ done ----------------
14.08.2012 18:16:40.361:   setting no speed limit
14.08.2012 18:16:40.361:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
14.08.2012 18:17:18.177:   Open Project: Spitzbergen_3 -- dvd project 2012-08-14
14.08.2012 18:17:18.177:   VideoMode: PAL   Temp Dir: I:\
14.08.2012 18:17:18.177:   dll version 4.8.4.0
14.08.2012 18:17:18.179:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
14.08.2012 18:17:18.179:   EstimateLayerSplitPoint()...
14.08.2012 18:17:18.261:   Splitpunkt 4271833088 auf Disk mit Größe 1878228992
14.08.2012 18:17:18.262:   Title an Stelle 0, Länge 131072, Typ 0
14.08.2012 18:17:18.262:   Title an Stelle 131072, Länge 131072, Typ 0
14.08.2012 18:17:18.262:   Title an Stelle 262144, Länge 1877966848, Typ 1
14.08.2012 18:17:18.262:   ... Split möglich nach aktuellem Title, -> Abbruch
14.08.2012 18:17:26.321:   Step 1 of 5, Encodiere Film 1 ...
14.08.2012 18:17:26.409:   Step 1 done
14.08.2012 18:17:26.411:   ConvertMovie() - encoded file: I:\DVD Image Spitzbergen_3\VTS_01_1.VOB
14.08.2012 18:17:26.411:   ConvertMovie() - encoded file: I:\DVD Image Spitzbergen_3\VTS_01_2.VOB
14.08.2012 18:17:26.449:   Step 2 of 5, Disc Image wird erzeugt...
14.08.2012 18:17:26.450:   Step 2 done
14.08.2012 18:17:28.858:   Step 3 of 5
14.08.2012 18:17:28.860:   Step 3 done
14.08.2012 18:17:28.862:   requested recorder feature:
14.08.2012 18:17:28.863:    cache size:       16,000000.1 MB
14.08.2012 18:17:28.863:    write speed:      5410,156250.1 KB/s
14.08.2012 18:17:28.864:    book type:        0
14.08.2012 18:17:28.864:    burn over:        no
14.08.2012 18:17:28.864:    simulate:         no
14.08.2012 18:17:28.864:    disc at once:     no
14.08.2012 18:17:28.865:    burn proof:       yes
14.08.2012 18:17:28.865:    format disc:      no
14.08.2012 18:17:28.865:    short leadout:    no
14.08.2012 18:17:28.866:    no defect mgmt:   no
14.08.2012 18:17:28.866:    verify after burn:no
14.08.2012 18:17:28.866:   ------------ OpenRecorderSetOptions Point ----------------
14.08.2012 18:17:28.989:   setting PoINT cache size to 16777216l
14.08.2012 18:17:28.990:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
14.08.2012 18:17:28.990:    Booktype: don't care
14.08.2012 18:17:29.000:   setting write speed to 5540000  bytes/sec
14.08.2012 18:17:29.000:   this equals 4,000000x DVD / 31,405895x CD Speed
14.08.2012 18:17:29.000:   ------------ done: succeeded ----------------
14.08.2012 18:17:29.001:   ------------ CreateAPIProject ----------------
14.08.2012 18:17:29.002:   Step 4 of 5
14.08.2012 18:17:29.004:   creating DVD project in prepfile mode...
14.08.2012 18:17:29.006:   create volume... OK
14.08.2012 18:17:29.007:   verify option OFF
14.08.2012 18:17:29.007:   set project options... OK
14.08.2012 18:17:29.008:   adding file "I:\DVD Image Spitzbergen_3\VIDEO_TS.IFO"
14.08.2012 18:17:29.009:   adding file "I:\DVD Image Spitzbergen_3\VIDEO_TS.VOB"
14.08.2012 18:17:29.012:   adding file "I:\DVD Image Spitzbergen_3\VTS_01_1.VOB"
14.08.2012 18:17:29.013:   adding file "I:\DVD Image Spitzbergen_3\VTS_01_2.VOB"
14.08.2012 18:17:29.016:   adding file "I:\DVD Image Spitzbergen_3\VTS_01_0.IFO"
14.08.2012 18:17:29.017:   Step 4 done
14.08.2012 18:17:29.018:   ------------ done ----------------
14.08.2012 18:17:29.018:   Step 5 of 5
14.08.2012 18:17:29.020:   ------------ BurnToDisc ----------------
14.08.2012 18:17:29.021:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
14.08.2012 18:17:29.022:    Booktype: don't care
14.08.2012 18:17:29.022:   setting write speed to 5540000  bytes/sec
14.08.2012 18:17:29.022:   this equals 4,000000x DVD / 31,405895x CD Speed
14.08.2012 18:17:29.022:   mounting volume on device...OK
14.08.2012 18:17:29.023:   Check on previously direct recorded session...OK
14.08.2012 18:17:29.023:   -- Volume mounted --
14.08.2012 18:17:29.023:   -- Recording on "X: PIONEER BD-RW   BDR-203" --
14.08.2012 18:17:29.023:   -- Medium is "DVD-R" --
14.08.2012 18:17:29.023:   -- Manufacturer "MCC 03RG20" --
14.08.2012 18:17:29.074:   AVSDK Message - INFO: :Recording volume ...
14.08.2012 18:17:29.074:   AVSDK Status - Begin operation Recording 862544 sectors/frames
14.08.2012 18:17:29.076:   AVSDK Message - INFO: :Recording -> writing data ...
14.08.2012 18:17:29.174:   wrote LeadIn, start DataCopy
14.08.2012 18:18:20.518:   AVSDK Message - ERROR: :Cannot write to disc -> Logical block address out of range (SK/ASC/ASCQ 05/21/02)
14.08.2012 18:18:30.747:   AVSDK Status - End operation Recording 862544 sectors/frames
14.08.2012 18:18:30.747:   AVSDK Message - INFO: :Recording failed due to write error on disc
14.08.2012 18:18:30.748:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 206 - write error occurred on disc !!!
14.08.2012 18:18:30.748:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 224 - write error occurred on disc !!!
14.08.2012 18:18:30.748:   ------------ done ----------------
14.08.2012 18:18:30.749:   Step 5 done
14.08.2012 18:18:30.750:   project burning failed
14.08.2012 18:18:30.758:   !!! DBK error in CBurnDevSupport::BurnProject(): 224 - write error occurred on disc !!!
14.08.2012 18:18:30.759:   !!! DBK error in BurnProject: 224 - write error occurred on disc !!!

Erst eimal Danke
Hier die Info     Günter

marion51 schrieb am 15.08.2012 um 12:00 Uhr

woher kommen deine dateien? aus einer cam? welcher typ?

hast du schon mit exportieren auf deine festplatte und dann brennen mit nero versucht?

nimm mal verbatim.

gruß

trucks schrieb am 15.08.2012 um 12:44 Uhr

Hallo,
ich nutze Panasonic HDC SD 300
DVD Rohlinge Verbatim
Auch von der Festplatte und mit Nero immer Abbruch nach dem Schreiben des Titels.
Gruß

trucks schrieb am 21.08.2012 um 09:53 Uhr

Hallo,
meine Frage wurde bisher nicht ausreichend beantwortet.
Jedenfalls gibt es bisher keine Lösung und ich weiß leider auch nicht welche zusätzlichen Informationen ich noch senden kann.
Groß

marion51 schrieb am 21.08.2012 um 12:55 Uhr

Videoformate MPEG4-AVC/H.264 (AVCHD)

Audioformate Dolby Digital 5.1

hast du das schon freigeschaltet:

Hinweis:
MPEG-4, MPEG-2 und Dolby®Digital erfordern aus Kopierschutzgründen eine kostenlose Erstaktivierung.
*DVCPRO und AVC-Intra erfordern eine kostenpflichtige Erstaktivierung.
MP3-Export erfordert die Installation von Windows Media Player ab Version 10.
Für das Reiserouten-Modul ist eine Internetverbindung erforderlich.

hd material bzw. avchd ist nur bedingt auf dvd brennbar. für diesen codec ist eigentlich bluray oder mediplayer das richtige medium.

hinweis: wir bemühen uns schnell zu antworten. doch auch wir haben manchmal noch etwas anderes zu tun. darüberhinaus sind wir kein angestellten von magix.

gruß

 

trucks schrieb am 21.08.2012 um 19:40 Uhr

Hallo marion51,

ich habe mich doch überhaupt nicht über die Zeitdauer beklagt.

Ich möchte nur eine einfache DVD brennen.
Das hat auch schon bei anderen Projekten funktioniert.
Aber es tritt sehr häufig und zur Zeit eben  permanent der Brennerfehler auf.
Der Brenner ist allerdings i.O.
gruß

Ich werde die Freischaltung überprüfen.

Ehemaliger User schrieb am 21.08.2012 um 19:56 Uhr

Hallo,

ich habe mich doch überhaupt nicht über die Zeitdauer beklagt

Hallo,
meine Frage wurde bisher nicht ausreichend beantwortet.

Das klang schon ein wenig ungeduldig finde ich. Bedenke: Es braucht auch Zeit, um gewisse "Probleme" nach zu vollziehen.

"Brennprobleme" kosten Rohlinge. Es gibt DVD - RW Scheiben. Du kannst Image Brennen. Aber da wiederhole ich mich. Oft liegen auch Menü fehler vor. Du müsstest schon mal Stück für Stück anlysieren.

Gruß

zonaroma