Brennvorgang wird nicht mit Stufe 2 weitergeführt, sondern friert ein

hergott schrieb am 28.03.2013 um 13:39 Uhr

Meldung :

0x74905DFE verweist auf Speicher in 0x00000020

der Vorgang READ konnte nicht auf den Speicher durchgeführt werden

 

VIDEO de LUXE MX , Problem tritt bei DVD und Blu Ray auf

bitte dringend um Hilfe

------------------------- 28.03.2013 08:31:47 --------------------------

28.03.2013 08:31:47.718:   DLLAV32.DLL loaded, all entry points available
28.03.2013 08:31:47.718:   AVSDK MsgCbFunc registered
28.03.2013 08:31:47.718:   AVSDK: StatCbFunc registered
28.03.2013 08:31:47.953:   AVSDK Version 11.0.226
28.03.2013 08:31:47.953:   ------------ Reading Device Info ----------------
28.03.2013 08:31:47.953:   AVSDK: 2 device(s) found
28.03.2013 08:31:47.953:   BurnSupport: 2 device(s) found
28.03.2013 08:31:47.953:   Adapter=1  ID=1  LUN=0   E:ATAPI DVD A  DH16A6S Revision:YL32
28.03.2013 08:31:47.953:   Adapter=2  ID=1  LUN=0   G:HL-DT-ST BD-RE  BE12LU30 Revision:4261
28.03.2013 08:31:47.953:   BurnSupport: 2 record device(s) available
28.03.2013 08:31:47.953:   BurnSupport: E: ATAPI DVD A  DH16A6S Rev. YL32
28.03.2013 08:31:47.953:   BurnSupport: G: HL-DT-ST BD-RE  BE12LU30 Rev. 4261
28.03.2013 08:31:47.953:   ------------ done ----------------
28.03.2013 08:31:48.328:   setting no speed limit
28.03.2013 08:31:48.328:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
28.03.2013 08:34:40.968:   setting no speed limit
28.03.2013 08:35:09.546:   Open Project: SINGAPUR -- dvd project 2013-03-28
28.03.2013 08:35:09.546:   VideoMode: PAL   Temp Dir: C:\Dokumente und Einstellungen\Kurt\Eigene Dateien\MAGIX\Video_deluxe_MX\
28.03.2013 08:35:09.546:   dll version 4.7.9.0
28.03.2013 08:35:09.546:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
28.03.2013 08:35:09.546:   EstimateLayerSplitPoint()...
28.03.2013 08:35:09.546:   Splitpunkt 4271833088 auf Disk mit Größe 33882112
28.03.2013 08:35:09.546:   Title an Stelle 0, Länge 131072, Typ 0
28.03.2013 08:35:09.546:   Title an Stelle 131072, Länge 131072, Typ 0
28.03.2013 08:35:09.546:   Title an Stelle 262144, Länge 33619968, Typ 1
28.03.2013 08:35:09.546:   ... Split möglich nach aktuellem Title, -> Abbruch
28.03.2013 08:35:09.562:   Step 1 of 4, Encodiere Film 1 ...
28.03.2013 08:35:46.890:   Step 1 done
28.03.2013 08:35:46.890:   Step 2 of 4, Encodiere Filmmenü ...
28.03.2013 08:35:48.703:   Step 2 done
28.03.2013 08:35:48.703:   Step 3 of 4, Encodiere Kapitelmenü 1 ...
28.03.2013 08:35:48.703:   Step 3 done
28.03.2013 08:35:48.703:   ConvertMovie() - encoded file: C:\Dokumente und Einstellungen\Kurt\Eigene Dateien\MAGIX\Video_deluxe_MX\VTS_01_1.VOB
28.03.2013 08:35:48.750:   Step 4 of 4, Disc Image wird erzeugt...
28.03.2013 08:35:48.953:   Step 4 done
28.03.2013 09:19:21.078:   setting no speed limit
28.03.2013 09:19:21.109:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
28.03.2013 09:19:21.109:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
28.03.2013 09:19:21.109:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
28.03.2013 09:19:27.015:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
28.03.2013 09:20:08.156:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
28.03.2013 09:20:10.250:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
28.03.2013 09:20:10.265:   Open Project: MALAYSIA_neu -- bd project 2013-03-28
28.03.2013 09:20:10.265:   VideoMode: PAL   Temp Dir: C:\Dokumente und Einstellungen\Kurt\Eigene Dateien\MAGIX\Video_deluxe_MX\Disc Images\
28.03.2013 09:20:10.265:   dll version 4.7.9.0
28.03.2013 09:20:10.265:   Step 1 of 5, Encodiere Film 1 ...
28.03.2013 12:21:40.390:   Step 1 done

-------------------------- 29.03.2013 07:16:47 --------------------------

29.03.2013 07:16:47.781:   DLLAV32.DLL loaded, all entry points available
29.03.2013 07:16:47.781:   AVSDK MsgCbFunc registered
29.03.2013 07:16:47.781:   AVSDK: StatCbFunc registered
29.03.2013 07:16:47.921:   AVSDK Version 11.0.226
29.03.2013 07:16:47.921:   ------------ Reading Device Info ----------------
29.03.2013 07:16:47.921:   AVSDK: 2 device(s) found
29.03.2013 07:16:47.921:   BurnSupport: 2 device(s) found
29.03.2013 07:16:47.921:   Adapter=1  ID=1  LUN=0   E:ATAPI DVD A  DH16A6S Revision:YL32
29.03.2013 07:16:47.921:   Adapter=2  ID=1  LUN=0   G:HL-DT-ST BD-RE  BE12LU30 Revision:4261
29.03.2013 07:16:47.921:   BurnSupport: 2 record device(s) available
29.03.2013 07:16:47.921:   BurnSupport: E: ATAPI DVD A  DH16A6S Rev. YL32
29.03.2013 07:16:47.921:   BurnSupport: G: HL-DT-ST BD-RE  BE12LU30 Rev. 4261
29.03.2013 07:16:47.921:   ------------ done ----------------
29.03.2013 07:16:48.156:   setting no speed limit
29.03.2013 07:16:48.156:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
29.03.2013 07:16:50.421:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
29.03.2013 07:17:26.078:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
29.03.2013 07:18:19.406:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
29.03.2013 07:18:21.500:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
29.03.2013 07:18:30.750:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
29.03.2013 07:18:32.828:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
29.03.2013 07:18:32.859:   Open Project: MALAYSIA_neu -- bd project 2013-03-29
29.03.2013 07:18:32.859:   VideoMode: PAL   Temp Dir: C:\Dokumente und Einstellungen\Kurt\Eigene Dateien\MAGIX\Video_deluxe_MX\Disc Images\
29.03.2013 07:18:32.859:   dll version 4.7.9.0
29.03.2013 07:18:32.859:   Step 1 of 5, Encodiere Film 1 ...
29.03.2013 10:00:36.125:   Step 1 done
 

 

 

Kommentare

korntunnel schrieb am 28.03.2013 um 13:54 Uhr

Hallo hergott, such mal die dbk.log uns stelle die hier ein. Beim Suchvorgang auch versteckte bzw. Systemdateien mit anzeigen lassen.

Hier ist sie bei mir:

C:\Users\Desktop\AppData\Roaming\MAGIX\Video_deluxe_MX_Premium

Frohe Ostern

Korntunnel

Zuletzt geändert von korntunnel am 28.03.2013, 13:56, insgesamt 2-mal geändert.

VPX5 - 15, VdL 16 bis VdL 2025 Premium-/Plus-Versionen, Audio & Music Lab

Im Einsatz: VPX 16 (205) und VdL Premium 2025 (192), Photostory 2025 (170) und VEGAS Pro 22.0

Betriebssystem Laptop: Windows 11 Prof. 64 bit, Vers.23H2, PC: Vers. 22H2

PC: 32 GB Arbeitsspeicher; Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz, 3696 MHz, 6 Kern(e), 12 logische(r) Prozessor(en); MSI-Motherboard Typ Z370 A Pro, Grafikkarte Intel UHD Graphics 630 und neu: NVidia RTX 3060.
Festplatte C = 512 GB SSD, Festplatte D = 4 TB HDD

Laptop: 64 GB Arbeitsspeicher; Intel(R) Core(TM) i9-13900H; CPU 2.60GHz, 14 Kern(e), 20 logische(r) Prozessor(en); Motherboard PE60RNE-S_RND-S_RNC-S Schenker, Grafikkarte 1 Intel Xe Graphics; Grafikkarte 2 NVIDIA GeForce RTX 4060
Festplatte C = 1 TB SSD, Festplatte D = 4 TB SSD

Camcorder Panasonic X909 und Sony FDR AX-53

Nikon D 500 Panasonic TZ-101, DJI Pocket, GoPro Hero 4, Samsung S8

hergott schrieb am 30.03.2013 um 12:21 Uhr

Vorerst besten Dank für eure Hilfen, ich hab nun gelernt wo ein logfile zu finden ist etc.

Der Grund dürfte sein, daß das letzte Bild endet und Ton, Text und ein Effekt (Feuerwerk) noch 5 Sekunden weiterlaufen, die Videoshow ist aber zur Gänze vorhanden.

Ich hab nun das m2ts File in die Timeline gegeben und ohne Probleme gebrannt

mfg