Fehlermeldung sschorrvk schrieb am 20.07.2011 um 14:24 Uhr Hallo, beim erstellen einer Fotodvd bekomme ich folgende Fehlermeldung währen des brennvorganges schritt 4 von 6 mda reports disc image creation error 84000fb3 Ich benutze Magix Fotos auf CD und DVD 8 deluxe lg Silke Zurück zum Post
Kommentare sschorrvk schrieb am 28.07.2011 um 11:47 Uhr Nachdem ich das nun versucht habe, klappt es immer noch . Gleiche Fehlermeldung und nun??? ich kopiere mal rein was im logfile stand, falls das was nutzt 28.07.2011 10:53:46.503: DLLAV32.DLL loaded, all entry points available 28.07.2011 10:53:46.506: AVSDK MsgCbFunc registered 28.07.2011 10:53:46.508: AVSDK: StatCbFunc registered 28.07.2011 10:53:46.672: AVSDK Version 9.0.193 28.07.2011 10:53:46.673: ------------ Reading Device Info ---------------- 28.07.2011 10:53:46.674: AVSDK: 1 device(s) found 28.07.2011 10:53:46.675: Adapter=2 ID=0 LUN=0 E:TEAC DV-W28E-R Revision:S.0A 28.07.2011 10:53:46.676: AVSDK: 1 record device(s) available 28.07.2011 10:53:46.678: ------------ done ---------------- 28.07.2011 10:53:46.875: setting no speed limit 28.07.2011 10:53:46.876: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 202 - burn support - invalid device !!! 28.07.2011 10:53:56.894: Open Project: Tim -- dvd project 2011-07-28 28.07.2011 10:53:56.895: VideoMode: PAL Temp Dir: C:\Users\Silde\Documents\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\ 28.07.2011 10:53:56.896: dll version 8.0.5.3 28.07.2011 10:53:56.903: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes 28.07.2011 10:53:56.905: EstimateLayerSplitPoint()... 28.07.2011 10:53:56.907: Splitpunkt 4271833088 auf Disk mit Größe 1176240128 28.07.2011 10:53:56.908: Title an Stelle 0, Länge 1176240128, Typ 1 28.07.2011 10:53:56.909: ... Split möglich nach aktuellem Title, -> Abbruch 28.07.2011 10:53:56.919: Step 1 of 3, Encodiere Film 1 ... 28.07.2011 11:13:59.145: Step 1 done 28.07.2011 11:13:59.149: ConvertMovie() - encoded file: C:\Users\Silde\Documents\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Tim\VTS_01_1.VOB 28.07.2011 11:13:59.151: Step 2 of 3, Erzeuge Disc-Image ... 28.07.2011 11:14:22.564: Step 2 done 28.07.2011 11:14:29.104: Step 3 of 3 28.07.2011 11:14:29.109: Step 3 done 28.07.2011 11:14:29.117: ------------ InitializeBurningProcess Point ---------------- 28.07.2011 11:14:29.343: setting PoINT cache size to 16777216l 28.07.2011 11:14:29.344: Used burn options: simulation: off DiscAtOnce: off BurnOver: off BurnProof: on FormatDisc: off ShortLeadOut: off NoDefectMgmt: off 28.07.2011 11:14:29.345: Booktype: don't care 28.07.2011 11:14:29.359: setting write speed to 3324000 bytes/sec 28.07.2011 11:14:29.361: this equals 2,400000x DVD / 18,843538x CD Speed 28.07.2011 11:14:29.362: ------------ done: succeeded ---------------- 28.07.2011 11:14:29.363: ------------ CreateAPIProject ---------------- 28.07.2011 11:14:29.367: Step 3 of 3 28.07.2011 11:14:29.373: creating DVD project in prepfile mode... 28.07.2011 11:14:29.384: create volume... OK 28.07.2011 11:14:29.385: verify option OFF 28.07.2011 11:14:29.387: adding file "C:\Users\Silde\Documents\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Tim\VIDEO_TS.IFO" 28.07.2011 11:14:29.392: adding file "C:\Users\Silde\Documents\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Tim\VTS_01_1.VOB" 28.07.2011 11:14:29.395: adding file "C:\Users\Silde\Documents\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Tim\VTS_01_0.IFO" 28.07.2011 11:14:29.397: Step 3 done 28.07.2011 11:14:29.399: ------------ done ---------------- 28.07.2011 11:14:29.399: ------------ BurnToDisc ---------------- 28.07.2011 11:14:29.400: time: 28.07.2011 11:14:29.401: Step 3 of 3 28.07.2011 11:14:29.406: Used burn options: simulation: off DiscAtOnce: off BurnOver: off BurnProof: on FormatDisc: off ShortLeadOut: off NoDefectMgmt: off 28.07.2011 11:14:29.407: Booktype: don't care 28.07.2011 11:14:29.407: setting write speed to 3324000 bytes/sec 28.07.2011 11:14:29.408: this equals 2,400000x DVD / 18,843538x CD Speed 28.07.2011 11:14:29.409: Check on previously direct recorded session...OK 28.07.2011 11:14:29.514: AVSDK Message - INFO: :Recording volume ... 28.07.2011 11:14:29.515: AVSDK Status - Begin operation Recording 422672 sectors/frames 28.07.2011 11:14:29.516: time: 28.07.2011 11:14:29.521: AVSDK Message - INFO: :Recording -> writing data ... 28.07.2011 11:14:32.807: wrote LeadIn, start DataCopy 28.07.2011 11:14:32.807: time: 28.07.2011 11:14:44.265: AVSDK Message - ERROR: :Cannot write to disc -> Internal drive failure, possibly a communication error (SK/ASC/ASCQ 04/44/D9) 28.07.2011 11:15:18.091: AVSDK Status - End operation Recording 422672 sectors/frames 28.07.2011 11:15:18.092: AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information 28.07.2011 11:15:18.093: !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 104 - general drive failure occurred !!! 28.07.2011 11:15:18.095: Step 3 done 28.07.2011 11:15:18.098: !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 243 - general drive error !!! 28.07.2011 11:15:18.100: ------------ done ---------------- 28.07.2011 11:15:18.102: time: 28.07.2011 11:15:18.103: project burning failed 28.07.2011 11:15:18.114: !!! DBK error in CBurnDevSupport::BurnProject(): 243 - general drive error !!! 28.07.2011 11:15:18.116: !!! DBK error in BurnProject: 243 - general drive error !!! 28.07.2011 11:16:22.015: WM_DEVICECHANGE( VOLUMECHANGE ) for drive e: 28.07.2011 11:16:22.017: DEVICE REMOVAL 28.07.2011 11:21:10.839: setting no speed limit 28.07.2011 11:22:02.162: Open Project: Tim -- dvd project 2011-07-28 28.07.2011 11:22:02.163: VideoMode: PAL Temp Dir: C:\Users\Silde\Documents\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\ 28.07.2011 11:22:02.165: dll version 8.0.5.3 28.07.2011 11:22:02.170: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes 28.07.2011 11:22:02.172: EstimateLayerSplitPoint()... 28.07.2011 11:22:02.174: Splitpunkt 4271833088 auf Disk mit Größe 1176240128 28.07.2011 11:22:02.175: Title an Stelle 0, Länge 1176240128, Typ 1 28.07.2011 11:22:02.176: ... Split möglich nach aktuellem Title, -> Abbruch 28.07.2011 11:22:16.781: Step 1 of 3, Encodiere Film 1 ... 28.07.2011 11:41:03.392: Step 1 done 28.07.2011 11:41:03.395: ConvertMovie() - encoded file: C:\Users\Silde\Documents\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Tim\VTS_01_1.VOB 28.07.2011 11:41:03.398: Step 2 of 3, Erzeuge Disc-Image ... 28.07.2011 11:41:16.513: Step 2 done 28.07.2011 11:41:22.976: Step 3 of 3 28.07.2011 11:41:22.980: Step 3 done 28.07.2011 11:41:22.985: ------------ InitializeBurningProcess Point ---------------- 28.07.2011 11:41:23.209: setting PoINT cache size to 16777216l 28.07.2011 11:41:23.210: Used burn options: simulation: off DiscAtOnce: off BurnOver: off BurnProof: on FormatDisc: off ShortLeadOut: off NoDefectMgmt: off 28.07.2011 11:41:23.211: Booktype: don't care 28.07.2011 11:41:23.225: setting write speed to 3324000 bytes/sec 28.07.2011 11:41:23.226: this equals 2,400000x DVD / 18,843538x CD Speed 28.07.2011 11:41:23.228: ------------ done: succeeded ---------------- 28.07.2011 11:41:23.229: ------------ CreateAPIProject ---------------- 28.07.2011 11:41:23.232: Step 3 of 3 28.07.2011 11:41:23.238: creating DVD project in prepfile mode... 28.07.2011 11:41:23.249: create volume... OK 28.07.2011 11:41:23.250: verify option OFF 28.07.2011 11:41:23.252: adding file "C:\Users\Silde\Documents\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Tim\VIDEO_TS.IFO" 28.07.2011 11:41:23.257: adding file "C:\Users\Silde\Documents\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Tim\VTS_01_1.VOB" 28.07.2011 11:41:23.262: adding file "C:\Users\Silde\Documents\MAGIX_Fotos_auf_CD_DVD_8_dlx\Disc Images\DVD Image Tim\VTS_01_0.IFO" 28.07.2011 11:41:23.267: Step 3 done 28.07.2011 11:41:23.271: ------------ done ---------------- 28.07.2011 11:41:23.272: ------------ BurnToDisc ---------------- 28.07.2011 11:41:23.273: time: 28.07.2011 11:41:23.274: Step 3 of 3 28.07.2011 11:41:23.279: Used burn options: simulation: off DiscAtOnce: off BurnOver: off BurnProof: on FormatDisc: off ShortLeadOut: off NoDefectMgmt: off 28.07.2011 11:41:23.281: Booktype: don't care 28.07.2011 11:41:23.281: setting write speed to 3324000 bytes/sec 28.07.2011 11:41:23.282: this equals 2,400000x DVD / 18,843538x CD Speed 28.07.2011 11:41:23.283: Check on previously direct recorded session...OK 28.07.2011 11:41:23.388: AVSDK Message - INFO: :Recording volume ... 28.07.2011 11:41:23.390: AVSDK Status - Begin operation Recording 422672 sectors/frames 28.07.2011 11:41:23.391: time: 28.07.2011 11:41:23.396: AVSDK Message - INFO: :Recording -> writing data ... 28.07.2011 11:41:28.954: wrote LeadIn, start DataCopy 28.07.2011 11:41:28.954: time: 28.07.2011 11:41:46.420: AVSDK Message - ERROR: :Cannot write to disc -> Internal drive failure, possibly a communication error (SK/ASC/ASCQ 04/44/D9) 28.07.2011 11:42:20.175: AVSDK Status - End operation Recording 422672 sectors/frames 28.07.2011 11:42:20.177: AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information 28.07.2011 11:42:20.178: !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 104 - general drive failure occurred !!! 28.07.2011 11:42:20.180: Step 3 done 28.07.2011 11:42:20.183: !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 243 - general drive error !!! 28.07.2011 11:42:20.184: ------------ done ---------------- 28.07.2011 11:42:20.186: time: 28.07.2011 11:42:20.187: project burning failed 28.07.2011 11:42:20.199: !!! DBK error in CBurnDevSupport::BurnProject(): 243 - general drive error !!! 28.07.2011 11:42:20.202: !!! DBK error in BurnProject: 243 - general drive error !!! sschorrvk schrieb am 28.07.2011 um 14:43 Uhr Danke , mit neuen Brennroutinen hat es funktioniert Die hatte ich zwar vor paar Tagen schon runtergeladen, aber dann gabs zwei Optionen und ich wählte dann "repair" statt "remove" Ich verwende Windows 7 Gruß Silke 1