Fotos auf DVD 2014 DeLuxe stoppt Encodiervorgang

andy50 schrieb am 14.11.2013 um 16:06 Uhr

Der Encodiervorgang eines neu erstellten Projekts (8,35 GB, 54min., für BD) stoppt nach wenigen Minuten, und zwar an unterschiedlichen Stellen nach Neustart des Encodierens. Fehlermeldung erscheint keine, es geht nur einfach nicht weiter. Problem besteht auch bei Verwendung von "Image Recorder" als Brenner.

Vorschaudurchlauf funktioniert einwandfrei, auch in den Spuren des Projekts sind keinerlei Fehler erkennbar.


Ausgabe als mp4-Video (Speicherung auf PC) klappt ebenfalls, d.h. Mixdown läuft durch. aber das ist nicht Sinn der Sache, denn das Projekt soll incl. Menü auf BD gebrannt werden...


Hardware: Desktop-PC Medion Microstar, 12 GB RAM, Grafikkarte NVIDIA GeForce GT 640, DirektX 11

Software: Fotos auf DVD 2014 DeLuxe (Version 13.0.1.85), aktuelle MAGIX-Brennroutine, aktuelle Grafikkartentreiber


Windows 8.1

Kommentare

andy50 schrieb am 14.11.2013 um 18:29 Uhr

Hallo FredW,

wie es manchmal so ist: Just als Deine Antwort kam hatte ich einen neuen Versuch laufen - und diesmal zu meiner Überraschung erfolgreich, denn ich hatte gegenüber früher nichts anders gemacht...

Trotzdem würde ich Dir gern die dbk.log-Datei zukommen lassen, vielleicht lässt sich ja die Ursache für das Scheitern der bisherigen Encodierversuche erkennen.

Aber sorry, wie kriege ich denn diese Datei in diese Antwort (oder in einen Anhang) - stehe völlig auf dem Schlauch.

andy50

 

andy50 schrieb am 14.11.2013 um 21:17 Uhr


-------------------------- 23.09.2013 18:10:21 --------------------------

23.09.2013 18:10:21.852:   DLLAV32.DLL loaded, all entry points available
23.09.2013 18:10:21.853:   AVSDK MsgCbFunc registered
23.09.2013 18:10:21.853:   AVSDK: StatCbFunc registered
23.09.2013 18:10:21.949:   AVSDK Version 11.0.233
23.09.2013 18:10:21.950:   ------------ Reading Device Info ----------------
23.09.2013 18:10:21.950:   AVSDK: 1 device(s) found
23.09.2013 18:10:21.950:   BurnSupport: 1 device(s) found
23.09.2013 18:10:21.951:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
23.09.2013 18:10:21.951:   BurnSupport: 1 record device(s) available
23.09.2013 18:10:21.951:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
23.09.2013 18:10:21.952:   ------------ done ----------------

-------------------------- 04.10.2013 15:02:13 --------------------------

04.10.2013 15:02:13.653:   DLLAV32.DLL loaded, all entry points available
04.10.2013 15:02:13.655:   AVSDK MsgCbFunc registered
04.10.2013 15:02:13.656:   AVSDK: StatCbFunc registered
04.10.2013 15:02:13.729:   AVSDK Version 11.0.233
04.10.2013 15:02:13.730:   ------------ Reading Device Info ----------------
04.10.2013 15:02:13.731:   AVSDK: 1 device(s) found
04.10.2013 15:02:13.732:   BurnSupport: 1 device(s) found
04.10.2013 15:02:13.733:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
04.10.2013 15:02:13.734:   BurnSupport: 1 record device(s) available
04.10.2013 15:02:13.734:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
04.10.2013 15:02:13.735:   ------------ done ----------------
04.10.2013 15:02:13.919:   setting no speed limit
04.10.2013 15:02:13.919:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
04.10.2013 15:02:13.994:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
04.10.2013 15:02:13.995:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
04.10.2013 15:02:13.995:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
04.10.2013 15:03:30.822:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6 -- bd project 2013-10-04
04.10.2013 15:03:30.823:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\ISLAND 2012 neu\
04.10.2013 15:03:30.824:   dll version 4.8.8.1
04.10.2013 15:03:30.864:   Step 1 of 3, Encodiere Film 1 ...

-------------------------- 04.10.2013 15:39:26 --------------------------

04.10.2013 15:39:26.770:   DLLAV32.DLL loaded, all entry points available
04.10.2013 15:39:26.771:   AVSDK MsgCbFunc registered
04.10.2013 15:39:26.772:   AVSDK: StatCbFunc registered
04.10.2013 15:39:26.872:   AVSDK Version 11.0.233
04.10.2013 15:39:26.873:   ------------ Reading Device Info ----------------
04.10.2013 15:39:26.873:   AVSDK: 1 device(s) found
04.10.2013 15:39:26.874:   BurnSupport: 1 device(s) found
04.10.2013 15:39:26.875:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
04.10.2013 15:39:26.876:   BurnSupport: 1 record device(s) available
04.10.2013 15:39:26.876:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
04.10.2013 15:39:26.876:   ------------ done ----------------
04.10.2013 15:39:27.032:   setting no speed limit
04.10.2013 15:39:27.033:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
04.10.2013 15:39:27.106:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
04.10.2013 15:39:27.107:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
04.10.2013 15:39:27.107:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
04.10.2013 15:39:43.879:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6 -- bd project 2013-10-04
04.10.2013 15:39:43.880:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\ISLAND 2012 neu\
04.10.2013 15:39:43.881:   dll version 4.8.8.1
04.10.2013 15:39:43.884:   Step 1 of 3, Encodiere Film 1 ...

-------------------------- 04.10.2013 16:12:44 --------------------------

04.10.2013 16:12:44.341:   DLLAV32.DLL loaded, all entry points available
04.10.2013 16:12:44.342:   AVSDK MsgCbFunc registered
04.10.2013 16:12:44.343:   AVSDK: StatCbFunc registered
04.10.2013 16:12:44.414:   AVSDK Version 11.0.233
04.10.2013 16:12:44.415:   ------------ Reading Device Info ----------------
04.10.2013 16:12:44.416:   AVSDK: 1 device(s) found
04.10.2013 16:12:44.417:   BurnSupport: 1 device(s) found
04.10.2013 16:12:44.418:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
04.10.2013 16:12:44.419:   BurnSupport: 1 record device(s) available
04.10.2013 16:12:44.420:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
04.10.2013 16:12:44.420:   ------------ done ----------------
04.10.2013 16:12:44.579:   setting no speed limit
04.10.2013 16:12:58.423:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6 -- bd project 2013-10-04
04.10.2013 16:12:58.424:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\ISLAND 2012 neu\
04.10.2013 16:12:58.425:   dll version 4.8.8.1
04.10.2013 16:12:58.429:   Step 1 of 3, Encodiere Film 1 ...

-------------------------- 04.10.2013 16:47:17 --------------------------

04.10.2013 16:47:17.472:   DLLAV32.DLL loaded, all entry points available
04.10.2013 16:47:17.473:   AVSDK MsgCbFunc registered
04.10.2013 16:47:17.474:   AVSDK: StatCbFunc registered
04.10.2013 16:47:17.564:   AVSDK Version 11.0.233
04.10.2013 16:47:17.567:   ------------ Reading Device Info ----------------
04.10.2013 16:47:17.569:   AVSDK: 1 device(s) found
04.10.2013 16:47:17.571:   BurnSupport: 1 device(s) found
04.10.2013 16:47:17.573:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
04.10.2013 16:47:17.575:   BurnSupport: 1 record device(s) available
04.10.2013 16:47:17.577:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
04.10.2013 16:47:17.578:   ------------ done ----------------
04.10.2013 16:47:17.780:   setting no speed limit
04.10.2013 16:47:34.820:   !!! DBK error in CBurnDevSupport::SetMode(): 21 - no device !!!
04.10.2013 16:47:51.882:   !!! DBK error in CBurnDevSupport::SetMode(): 21 - no device !!!

-------------------------- 04.10.2013 16:53:23 --------------------------

04.10.2013 16:53:23.277:   DLLAV32.DLL loaded, all entry points available
04.10.2013 16:53:23.279:   AVSDK MsgCbFunc registered
04.10.2013 16:53:23.280:   AVSDK: StatCbFunc registered
04.10.2013 16:53:23.363:   AVSDK Version 11.0.233
04.10.2013 16:53:23.364:   ------------ Reading Device Info ----------------
04.10.2013 16:53:23.365:   AVSDK: 1 device(s) found
04.10.2013 16:53:23.366:   BurnSupport: 1 device(s) found
04.10.2013 16:53:23.367:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
04.10.2013 16:53:23.368:   BurnSupport: 1 record device(s) available
04.10.2013 16:53:23.369:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
04.10.2013 16:53:23.369:   ------------ done ----------------
04.10.2013 16:53:23.530:   setting no speed limit
04.10.2013 16:53:33.697:   !!! DBK error in CBurnDevSupport::SetMode(): 21 - no device !!!
04.10.2013 16:54:29.881:   !!! DBK error in CBurnDevSupport::SetMode(): 21 - no device !!!
04.10.2013 16:55:42.577:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6 -- bd project 2013-10-04
04.10.2013 16:55:42.577:   VideoMode: PAL   Temp Dir: C:\Documents\MAGIX\Fotos auf DVD 2014 Deluxe\Disc Images\
04.10.2013 16:55:42.577:   dll version 4.8.8.1
04.10.2013 16:55:42.580:   Step 1 of 4, Encodiere Film 1 ...

-------------------------- 04.10.2013 21:42:56 --------------------------

04.10.2013 21:42:56.594:   DLLAV32.DLL loaded, all entry points available
04.10.2013 21:42:56.596:   AVSDK MsgCbFunc registered
04.10.2013 21:42:56.596:   AVSDK: StatCbFunc registered
04.10.2013 21:42:56.660:   AVSDK Version 11.0.233
04.10.2013 21:42:56.661:   ------------ Reading Device Info ----------------
04.10.2013 21:42:56.661:   AVSDK: 1 device(s) found
04.10.2013 21:42:56.661:   BurnSupport: 1 device(s) found
04.10.2013 21:42:56.662:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
04.10.2013 21:42:56.662:   BurnSupport: 1 record device(s) available
04.10.2013 21:42:56.662:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
04.10.2013 21:42:56.662:   ------------ done ----------------
04.10.2013 21:42:56.824:   setting no speed limit
04.10.2013 21:43:07.686:   !!! DBK error in CBurnDevSupport::SetMode(): 21 - no device !!!
04.10.2013 21:44:02.082:   setting no speed limit
04.10.2013 21:44:04.551:   !!! DBK error in CBurnDevSupport::SetMode(): 21 - no device !!!
04.10.2013 21:45:40.928:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6 -- bd project 2013-10-04
04.10.2013 21:45:40.929:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\Eigene Videos\Neuer Ordner\
04.10.2013 21:45:40.930:   dll version 4.8.8.1
04.10.2013 21:45:40.933:   Step 1 of 3, Encodiere Film 1 ...

-------------------------- 04.10.2013 23:36:06 --------------------------

04.10.2013 23:36:06.662:   DLLAV32.DLL loaded, all entry points available
04.10.2013 23:36:06.672:   AVSDK MsgCbFunc registered
04.10.2013 23:36:06.672:   AVSDK: StatCbFunc registered
04.10.2013 23:36:06.774:   AVSDK Version 11.0.233
04.10.2013 23:36:06.774:   ------------ Reading Device Info ----------------
04.10.2013 23:36:06.775:   AVSDK: 1 device(s) found
04.10.2013 23:36:06.775:   BurnSupport: 1 device(s) found
04.10.2013 23:36:06.775:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
04.10.2013 23:36:06.776:   BurnSupport: 1 record device(s) available
04.10.2013 23:36:06.776:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
04.10.2013 23:36:06.776:   ------------ done ----------------
04.10.2013 23:36:06.972:   setting no speed limit
04.10.2013 23:37:28.567:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6 -- bd project 2013-10-04
04.10.2013 23:37:28.568:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\Eigene Videos\Neuer Ordner\
04.10.2013 23:37:28.569:   dll version 4.8.8.1
04.10.2013 23:37:28.642:   Step 1 of 3, Encodiere Film 1 ...

-------------------------- 13.10.2013 17:23:59 --------------------------

13.10.2013 17:23:59.096:   DLLAV32.DLL loaded, all entry points available
13.10.2013 17:23:59.098:   AVSDK MsgCbFunc registered
13.10.2013 17:23:59.099:   AVSDK: StatCbFunc registered
13.10.2013 17:23:59.182:   AVSDK Version 11.0.233
13.10.2013 17:23:59.183:   ------------ Reading Device Info ----------------
13.10.2013 17:23:59.184:   AVSDK: 1 device(s) found
13.10.2013 17:23:59.185:   BurnSupport: 1 device(s) found
13.10.2013 17:23:59.186:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
13.10.2013 17:23:59.187:   BurnSupport: 1 record device(s) available
13.10.2013 17:23:59.188:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
13.10.2013 17:23:59.189:   ------------ done ----------------
13.10.2013 17:23:59.395:   setting no speed limit
13.10.2013 17:24:04.450:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
13.10.2013 17:24:04.508:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
13.10.2013 17:24:04.509:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
13.10.2013 17:24:04.509:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
13.10.2013 17:25:20.139:   setting no speed limit
13.10.2013 17:25:20.196:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
13.10.2013 17:25:20.197:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
13.10.2013 17:25:20.197:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
13.10.2013 17:27:00.189:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6 -- bd project 2013-10-13
13.10.2013 17:27:00.192:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\Eigene Videos\Neuer Ordner\
13.10.2013 17:27:00.195:   dll version 4.8.8.1
13.10.2013 17:27:00.204:   Step 1 of 3, Encodiere Film 1 ...

-------------------------- 13.10.2013 19:10:40 --------------------------

13.10.2013 19:10:40.473:   DLLAV32.DLL loaded, all entry points available
13.10.2013 19:10:40.474:   AVSDK MsgCbFunc registered
13.10.2013 19:10:40.475:   AVSDK: StatCbFunc registered
13.10.2013 19:10:40.577:   AVSDK Version 11.0.233
13.10.2013 19:10:40.578:   ------------ Reading Device Info ----------------
13.10.2013 19:10:40.578:   AVSDK: 1 device(s) found
13.10.2013 19:10:40.578:   BurnSupport: 1 device(s) found
13.10.2013 19:10:40.579:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
13.10.2013 19:10:40.579:   BurnSupport: 1 record device(s) available
13.10.2013 19:10:40.579:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
13.10.2013 19:10:40.580:   ------------ done ----------------
13.10.2013 19:10:40.802:   setting no speed limit
13.10.2013 19:10:40.803:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
13.10.2013 19:10:40.860:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
13.10.2013 19:10:40.860:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
13.10.2013 19:10:40.861:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
13.10.2013 19:10:53.438:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6 -- bd project 2013-10-13
13.10.2013 19:10:53.439:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\Eigene Videos\Neuer Ordner\
13.10.2013 19:10:53.440:   dll version 4.8.8.1
13.10.2013 19:10:53.443:   Step 1 of 3, Encodiere Film 1 ...

-------------------------- 13.10.2013 20:20:45 --------------------------

13.10.2013 20:20:45.901:   DLLAV32.DLL loaded, all entry points available
13.10.2013 20:20:45.902:   AVSDK MsgCbFunc registered
13.10.2013 20:20:45.903:   AVSDK: StatCbFunc registered
13.10.2013 20:20:45.975:   AVSDK Version 11.0.233
13.10.2013 20:20:45.976:   ------------ Reading Device Info ----------------
13.10.2013 20:20:45.977:   AVSDK: 1 device(s) found
13.10.2013 20:20:45.978:   BurnSupport: 1 device(s) found
13.10.2013 20:20:45.979:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
13.10.2013 20:20:45.980:   BurnSupport: 1 record device(s) available
13.10.2013 20:20:45.981:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
13.10.2013 20:20:45.981:   ------------ done ----------------
13.10.2013 20:20:46.138:   setting no speed limit
13.10.2013 20:20:46.139:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
13.10.2013 20:20:46.212:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
13.10.2013 20:20:46.213:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
13.10.2013 20:20:46.213:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
13.10.2013 20:20:55.932:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6 -- bd project 2013-10-13
13.10.2013 20:20:55.933:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\Eigene Videos\Neuer Ordner\
13.10.2013 20:20:55.934:   dll version 4.8.8.1
13.10.2013 20:20:55.937:   Step 1 of 3, Encodiere Film 1 ...

-------------------------- 13.10.2013 21:02:04 --------------------------

13.10.2013 21:02:04.727:   DLLAV32.DLL loaded, all entry points available
13.10.2013 21:02:04.728:   AVSDK MsgCbFunc registered
13.10.2013 21:02:04.730:   AVSDK: StatCbFunc registered
13.10.2013 21:02:04.818:   AVSDK Version 11.0.233
13.10.2013 21:02:04.819:   ------------ Reading Device Info ----------------
13.10.2013 21:02:04.820:   AVSDK: 1 device(s) found
13.10.2013 21:02:04.821:   BurnSupport: 1 device(s) found
13.10.2013 21:02:04.822:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
13.10.2013 21:02:04.824:   BurnSupport: 1 record device(s) available
13.10.2013 21:02:04.825:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
13.10.2013 21:02:04.825:   ------------ done ----------------
13.10.2013 21:02:04.980:   setting no speed limit
13.10.2013 21:02:04.981:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
13.10.2013 21:02:05.055:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
13.10.2013 21:02:05.056:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
13.10.2013 21:02:05.056:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
13.10.2013 21:02:15.234:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6 -- bd project 2013-10-13
13.10.2013 21:02:15.235:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\Eigene Videos\Neuer Ordner\
13.10.2013 21:02:15.236:   dll version 4.8.8.1
13.10.2013 21:02:15.239:   Step 1 of 3, Encodiere Film 1 ...

-------------------------- 15.10.2013 09:19:27 --------------------------

15.10.2013 09:19:27.403:   DLLAV32.DLL loaded, all entry points available
15.10.2013 09:19:27.405:   AVSDK MsgCbFunc registered
15.10.2013 09:19:27.405:   AVSDK: StatCbFunc registered
15.10.2013 09:19:27.512:   AVSDK Version 11.0.233
15.10.2013 09:19:27.512:   ------------ Reading Device Info ----------------
15.10.2013 09:19:27.513:   AVSDK: 1 device(s) found
15.10.2013 09:19:27.513:   BurnSupport: 1 device(s) found
15.10.2013 09:19:27.513:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
15.10.2013 09:19:27.514:   BurnSupport: 1 record device(s) available
15.10.2013 09:19:27.514:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
15.10.2013 09:19:27.515:   ------------ done ----------------
15.10.2013 09:19:27.698:   setting no speed limit
15.10.2013 09:19:27.699:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
15.10.2013 09:19:27.756:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
15.10.2013 09:19:27.756:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
15.10.2013 09:19:27.757:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
15.10.2013 09:20:29.031:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6 -- bd project 2013-10-15
15.10.2013 09:20:29.032:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\Eigene Videos\Neuer Ordner\
15.10.2013 09:20:29.033:   dll version 4.8.8.1
15.10.2013 09:20:29.036:   Step 1 of 3, Encodiere Film 1 ...

-------------------------- 15.10.2013 18:30:58 --------------------------

15.10.2013 18:30:58.832:   DLLAV32.DLL loaded, all entry points available
15.10.2013 18:30:58.834:   AVSDK MsgCbFunc registered
15.10.2013 18:30:58.834:   AVSDK: StatCbFunc registered
15.10.2013 18:30:58.930:   AVSDK Version 11.0.233
15.10.2013 18:30:58.931:   ------------ Reading Device Info ----------------
15.10.2013 18:30:58.931:   AVSDK: 1 device(s) found
15.10.2013 18:30:58.932:   BurnSupport: 1 device(s) found
15.10.2013 18:30:58.932:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
15.10.2013 18:30:58.932:   BurnSupport: 1 record device(s) available
15.10.2013 18:30:58.933:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
15.10.2013 18:30:58.933:   ------------ done ----------------
15.10.2013 18:30:59.127:   setting no speed limit
15.10.2013 18:31:04.990:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
15.10.2013 18:31:05.066:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
15.10.2013 18:31:05.066:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
15.10.2013 18:31:05.067:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
15.10.2013 18:32:12.021:   setting no speed limit
15.10.2013 18:32:12.080:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
15.10.2013 18:32:12.081:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
15.10.2013 18:32:12.082:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
15.10.2013 18:32:33.175:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6 -- bd project 2013-10-15
15.10.2013 18:32:33.176:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\Eigene Videos\Neuer Ordner\
15.10.2013 18:32:33.177:   dll version 4.8.8.1
15.10.2013 18:32:33.180:   Step 1 of 3, Encodiere Film 1 ...

-------------------------- 16.10.2013 10:59:16 --------------------------

16.10.2013 10:59:16.225:   DLLAV32.DLL loaded, all entry points available
16.10.2013 10:59:16.227:   AVSDK MsgCbFunc registered
16.10.2013 10:59:16.229:   AVSDK: StatCbFunc registered
16.10.2013 10:59:16.341:   AVSDK Version 11.0.233
16.10.2013 10:59:16.343:   ------------ Reading Device Info ----------------
16.10.2013 10:59:16.346:   AVSDK: 1 device(s) found
16.10.2013 10:59:16.348:   BurnSupport: 1 device(s) found
16.10.2013 10:59:16.350:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
16.10.2013 10:59:16.353:   BurnSupport: 1 record device(s) available
16.10.2013 10:59:16.355:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
16.10.2013 10:59:16.357:   ------------ done ----------------
16.10.2013 10:59:16.568:   setting no speed limit
16.10.2013 10:59:16.569:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
16.10.2013 10:59:16.633:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
16.10.2013 10:59:16.633:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
16.10.2013 10:59:16.634:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
16.10.2013 10:59:29.801:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6 -- bd project 2013-10-16
16.10.2013 10:59:29.801:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\Eigene Videos\Neuer Ordner\
16.10.2013 10:59:29.801:   dll version 4.8.8.1
16.10.2013 10:59:29.804:   Step 1 of 3, Encodiere Film 1 ...
16.10.2013 12:19:00.232:   Step 1 done
16.10.2013 12:19:00.318:   Step 2 of 3, Encodiere Filmmenü ...
16.10.2013 12:19:09.507:   Step 2 done
16.10.2013 12:19:09.535:   ConvertMovie() - encoded file: D:\Eigene Dateien\Eigene Videos\Neuer Ordner\BDMV\STREAM\00000.m2ts
16.10.2013 12:19:09.579:   Step 3 of 3, Disc Image wird erzeugt...
16.10.2013 12:19:09.654:   Step 3 done

-------------------------- 17.10.2013 13:31:27 --------------------------

17.10.2013 13:31:27.291:   DLLAV32.DLL loaded, all entry points available
17.10.2013 13:31:27.299:   AVSDK MsgCbFunc registered
17.10.2013 13:31:27.300:   AVSDK: StatCbFunc registered
17.10.2013 13:31:27.402:   AVSDK Version 11.0.233
17.10.2013 13:31:27.402:   ------------ Reading Device Info ----------------
17.10.2013 13:31:27.402:   AVSDK: 1 device(s) found
17.10.2013 13:31:27.403:   BurnSupport: 1 device(s) found
17.10.2013 13:31:27.403:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
17.10.2013 13:31:27.404:   BurnSupport: 1 record device(s) available
17.10.2013 13:31:27.404:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
17.10.2013 13:31:27.404:   ------------ done ----------------
17.10.2013 13:31:27.576:   setting no speed limit
17.10.2013 13:31:27.576:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
17.10.2013 13:31:27.650:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
17.10.2013 13:31:27.650:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
17.10.2013 13:31:27.650:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
17.10.2013 13:32:16.417:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6 -- bd project 2013-10-17
17.10.2013 13:32:16.418:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\Eigene Videos\Nordl.Isl. (konv. 2)\
17.10.2013 13:32:16.419:   dll version 4.8.8.1
17.10.2013 13:32:16.423:   Step 1 of 3, Encodiere Film 1 ...

-------------------------- 17.10.2013 15:11:04 --------------------------

17.10.2013 15:11:04.581:   DLLAV32.DLL loaded, all entry points available
17.10.2013 15:11:04.592:   AVSDK MsgCbFunc registered
17.10.2013 15:11:04.593:   AVSDK: StatCbFunc registered
17.10.2013 15:11:04.696:   AVSDK Version 11.0.233
17.10.2013 15:11:04.698:   ------------ Reading Device Info ----------------
17.10.2013 15:11:04.701:   AVSDK: 1 device(s) found
17.10.2013 15:11:04.703:   BurnSupport: 1 device(s) found
17.10.2013 15:11:04.706:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
17.10.2013 15:11:04.708:   BurnSupport: 1 record device(s) available
17.10.2013 15:11:04.710:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
17.10.2013 15:11:04.713:   ------------ done ----------------
17.10.2013 15:11:04.871:   setting no speed limit
17.10.2013 15:11:04.872:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
17.10.2013 15:11:04.933:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
17.10.2013 15:11:04.934:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
17.10.2013 15:11:04.934:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
17.10.2013 15:12:01.697:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6 -- bd project 2013-10-17
17.10.2013 15:12:01.698:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\Eigene Videos\Nordl.Isl. (konv. 2)\
17.10.2013 15:12:01.698:   dll version 4.8.8.1
17.10.2013 15:12:01.700:   Step 1 of 3, Encodiere Film 1 ...

-------------------------- 17.10.2013 17:46:53 --------------------------

17.10.2013 17:46:53.900:   DLLAV32.DLL loaded, all entry points available
17.10.2013 17:46:53.907:   AVSDK MsgCbFunc registered
17.10.2013 17:46:53.908:   AVSDK: StatCbFunc registered
17.10.2013 17:46:54.011:   AVSDK Version 11.0.233
17.10.2013 17:46:54.011:   ------------ Reading Device Info ----------------
17.10.2013 17:46:54.012:   AVSDK: 1 device(s) found
17.10.2013 17:46:54.012:   BurnSupport: 1 device(s) found
17.10.2013 17:46:54.012:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
17.10.2013 17:46:54.013:   BurnSupport: 1 record device(s) available
17.10.2013 17:46:54.013:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
17.10.2013 17:46:54.013:   ------------ done ----------------
17.10.2013 17:46:54.205:   setting no speed limit
17.10.2013 17:46:57.897:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
17.10.2013 17:46:57.974:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
17.10.2013 17:46:57.974:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
17.10.2013 17:46:57.974:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
17.10.2013 17:47:37.053:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6 -- bd project 2013-10-17
17.10.2013 17:47:37.055:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\Eigene Videos\Nordl.Isl. (konv. 2)\
17.10.2013 17:47:37.056:   dll version 4.8.8.1
17.10.2013 17:47:37.059:   Step 1 of 3, Encodiere Film 1 ...
17.10.2013 19:07:00.377:   Step 1 done
17.10.2013 19:07:00.427:   Step 2 of 3, Encodiere Filmmenü ...
17.10.2013 19:07:09.929:   Step 2 done
17.10.2013 19:07:09.945:   ConvertMovie() - encoded file: D:\Eigene Dateien\Eigene Videos\Nordl.Isl. (konv. 2)\BDMV\STREAM\00000.m2ts
17.10.2013 19:07:09.974:   Step 3 of 3, Disc Image wird erzeugt...
17.10.2013 19:07:10.068:   Step 3 done

-------------------------- 23.10.2013 18:15:49 --------------------------

23.10.2013 18:15:49.706:   DLLAV32.DLL loaded, all entry points available
23.10.2013 18:15:49.712:   AVSDK MsgCbFunc registered
23.10.2013 18:15:49.712:   AVSDK: StatCbFunc registered
23.10.2013 18:15:49.873:   AVSDK Version 11.0.233
23.10.2013 18:15:49.873:   ------------ Reading Device Info ----------------
23.10.2013 18:15:49.874:   AVSDK: 1 device(s) found
23.10.2013 18:15:49.874:   BurnSupport: 1 device(s) found
23.10.2013 18:15:49.875:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
23.10.2013 18:15:49.875:   BurnSupport: 1 record device(s) available
23.10.2013 18:15:49.875:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
23.10.2013 18:15:49.876:   ------------ done ----------------
23.10.2013 18:15:50.075:   setting no speed limit
23.10.2013 18:15:50.077:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
23.10.2013 18:15:50.166:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
23.10.2013 18:15:50.167:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
23.10.2013 18:15:50.167:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
23.10.2013 18:16:57.821:   setting no speed limit
23.10.2013 18:16:57.898:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
23.10.2013 18:16:57.900:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
23.10.2013 18:16:57.902:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
23.10.2013 18:18:11.153:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6 -- bd project 2013-10-23
23.10.2013 18:18:11.155:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\Eigene Videos\Konvert. Nordl.Island 2012\
23.10.2013 18:18:11.156:   dll version 4.8.8.1
23.10.2013 18:18:11.159:   Step 1 of 3, Encodiere Film 1 ...

-------------------------- 23.10.2013 18:50:05 --------------------------

23.10.2013 18:50:05.584:   DLLAV32.DLL loaded, all entry points available
23.10.2013 18:50:05.586:   AVSDK MsgCbFunc registered
23.10.2013 18:50:05.587:   AVSDK: StatCbFunc registered
23.10.2013 18:50:05.672:   AVSDK Version 11.0.233
23.10.2013 18:50:05.673:   ------------ Reading Device Info ----------------
23.10.2013 18:50:05.675:   AVSDK: 1 device(s) found
23.10.2013 18:50:05.676:   BurnSupport: 1 device(s) found
23.10.2013 18:50:05.677:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
23.10.2013 18:50:05.678:   BurnSupport: 1 record device(s) available
23.10.2013 18:50:05.679:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
23.10.2013 18:50:05.680:   ------------ done ----------------
23.10.2013 18:50:05.840:   setting no speed limit
23.10.2013 18:50:05.840:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
23.10.2013 18:50:05.904:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
23.10.2013 18:50:05.904:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
23.10.2013 18:50:05.905:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
23.10.2013 18:50:19.695:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6 -- bd project 2013-10-23
23.10.2013 18:50:19.697:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\Eigene Videos\Konvert. Nordl.Island 2012\
23.10.2013 18:50:19.698:   dll version 4.8.8.1
23.10.2013 18:50:19.702:   Step 1 of 3, Encodiere Film 1 ...

-------------------------- 23.10.2013 19:44:30 --------------------------

23.10.2013 19:44:30.186:   DLLAV32.DLL loaded, all entry points available
23.10.2013 19:44:30.187:   AVSDK MsgCbFunc registered
23.10.2013 19:44:30.188:   AVSDK: StatCbFunc registered
23.10.2013 19:44:30.290:   AVSDK Version 11.0.233
23.10.2013 19:44:30.291:   ------------ Reading Device Info ----------------
23.10.2013 19:44:30.292:   AVSDK: 1 device(s) found
23.10.2013 19:44:30.293:   BurnSupport: 1 device(s) found
23.10.2013 19:44:30.294:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
23.10.2013 19:44:30.295:   BurnSupport: 1 record device(s) available
23.10.2013 19:44:30.296:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
23.10.2013 19:44:30.296:   ------------ done ----------------
23.10.2013 19:44:30.470:   setting no speed limit
23.10.2013 19:44:30.471:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
23.10.2013 19:44:30.527:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
23.10.2013 19:44:30.527:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
23.10.2013 19:44:30.527:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
23.10.2013 19:44:45.147:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6 -- bd project 2013-10-23
23.10.2013 19:44:45.147:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\Eigene Videos\Konvert. Nordl.Island 2012\
23.10.2013 19:44:45.148:   dll version 4.8.8.1
23.10.2013 19:44:45.150:   Step 1 of 3, Encodiere Film 1 ...

-------------------------- 23.10.2013 20:16:32 --------------------------

23.10.2013 20:16:32.185:   DLLAV32.DLL loaded, all entry points available
23.10.2013 20:16:32.186:   AVSDK MsgCbFunc registered
23.10.2013 20:16:32.187:   AVSDK: StatCbFunc registered
23.10.2013 20:16:32.305:   AVSDK Version 11.0.233
23.10.2013 20:16:32.306:   ------------ Reading Device Info ----------------
23.10.2013 20:16:32.307:   AVSDK: 1 device(s) found
23.10.2013 20:16:32.308:   BurnSupport: 1 device(s) found
23.10.2013 20:16:32.309:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
23.10.2013 20:16:32.310:   BurnSupport: 1 record device(s) available
23.10.2013 20:16:32.310:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
23.10.2013 20:16:32.311:   ------------ done ----------------
23.10.2013 20:16:32.474:   setting no speed limit
23.10.2013 20:16:32.475:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
23.10.2013 20:16:32.551:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
23.10.2013 20:16:32.551:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
23.10.2013 20:16:32.552:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
23.10.2013 20:16:43.704:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6 -- bd project 2013-10-23
23.10.2013 20:16:43.705:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\Eigene Videos\Konvert. Nordl.Island 2012\
23.10.2013 20:16:43.706:   dll version 4.8.8.1
23.10.2013 20:16:43.710:   Step 1 of 3, Encodiere Film 1 ...

-------------------------- 24.10.2013 09:25:26 --------------------------

24.10.2013 09:25:26.210:   DLLAV32.DLL loaded, all entry points available
24.10.2013 09:25:26.211:   AVSDK MsgCbFunc registered
24.10.2013 09:25:26.212:   AVSDK: StatCbFunc registered
24.10.2013 09:25:26.324:   AVSDK Version 11.0.233
24.10.2013 09:25:26.326:   ------------ Reading Device Info ----------------
24.10.2013 09:25:26.328:   AVSDK: 1 device(s) found
24.10.2013 09:25:26.330:   BurnSupport: 1 device(s) found
24.10.2013 09:25:26.332:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
24.10.2013 09:25:26.335:   BurnSupport: 1 record device(s) available
24.10.2013 09:25:26.337:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
24.10.2013 09:25:26.339:   ------------ done ----------------
24.10.2013 09:25:26.490:   setting no speed limit
24.10.2013 09:25:26.491:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
24.10.2013 09:25:26.548:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
24.10.2013 09:25:26.548:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
24.10.2013 09:25:26.549:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
24.10.2013 09:26:04.025:   setting no speed limit
24.10.2013 09:26:14.149:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6 -- bd project 2013-10-24
24.10.2013 09:26:14.150:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\Eigene Videos\Konvert. Nordl.Island 2012\
24.10.2013 09:26:14.151:   dll version 4.8.8.1
24.10.2013 09:26:14.154:   Step 1 of 3, Encodiere Film 1 ...

-------------------------- 24.10.2013 10:57:49 --------------------------

24.10.2013 10:57:49.776:   DLLAV32.DLL loaded, all entry points available
24.10.2013 10:57:49.778:   AVSDK MsgCbFunc registered
24.10.2013 10:57:49.779:   AVSDK: StatCbFunc registered
24.10.2013 10:57:49.893:   AVSDK Version 11.0.233
24.10.2013 10:57:49.894:   ------------ Reading Device Info ----------------
24.10.2013 10:57:49.896:   AVSDK: 1 device(s) found
24.10.2013 10:57:49.896:   BurnSupport: 1 device(s) found
24.10.2013 10:57:49.897:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
24.10.2013 10:57:49.899:   BurnSupport: 1 record device(s) available
24.10.2013 10:57:49.899:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
24.10.2013 10:57:49.899:   ------------ done ----------------
24.10.2013 10:57:50.065:   setting no speed limit
24.10.2013 10:59:08.807:   setting no speed limit
24.10.2013 10:59:28.698:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6 -- bd project 2013-10-24
24.10.2013 10:59:28.698:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\Eigene Videos\Konvert. Nordl.Island 2012\
24.10.2013 10:59:28.699:   dll version 4.8.8.1
24.10.2013 10:59:28.701:   Step 1 of 3, Encodiere Film 1 ...

-------------------------- 24.10.2013 11:54:24 --------------------------

24.10.2013 11:54:24.618:   DLLAV32.DLL loaded, all entry points available
24.10.2013 11:54:24.619:   AVSDK MsgCbFunc registered
24.10.2013 11:54:24.620:   AVSDK: StatCbFunc registered
24.10.2013 11:54:24.739:   AVSDK Version 11.0.233
24.10.2013 11:54:24.742:   ------------ Reading Device Info ----------------
24.10.2013 11:54:24.744:   AVSDK: 1 device(s) found
24.10.2013 11:54:24.746:   BurnSupport: 1 device(s) found
24.10.2013 11:54:24.749:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
24.10.2013 11:54:24.751:   BurnSupport: 1 record device(s) available
24.10.2013 11:54:24.751:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
24.10.2013 11:54:24.752:   ------------ done ----------------
24.10.2013 11:54:24.920:   setting no speed limit
24.10.2013 11:54:44.273:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6 -- bd project 2013-10-24
24.10.2013 11:54:44.274:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\Eigene Videos\Konvert. Nordl.Island 2012\
24.10.2013 11:54:44.275:   dll version 4.8.8.1
24.10.2013 11:54:44.278:   Step 1 of 3, Encodiere Film 1 ...

-------------------------- 24.10.2013 14:04:54 --------------------------

24.10.2013 14:04:54.814:   DLLAV32.DLL loaded, all entry points available
24.10.2013 14:04:54.815:   AVSDK MsgCbFunc registered
24.10.2013 14:04:54.816:   AVSDK: StatCbFunc registered
24.10.2013 14:04:54.935:   AVSDK Version 11.0.233
24.10.2013 14:04:54.937:   ------------ Reading Device Info ----------------
24.10.2013 14:04:54.939:   AVSDK: 1 device(s) found
24.10.2013 14:04:54.942:   BurnSupport: 1 device(s) found
24.10.2013 14:04:54.944:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
24.10.2013 14:04:54.946:   BurnSupport: 1 record device(s) available
24.10.2013 14:04:54.948:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
24.10.2013 14:04:54.949:   ------------ done ----------------
24.10.2013 14:04:55.106:   setting no speed limit
24.10.2013 14:05:11.740:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6 -- bd project 2013-10-24
24.10.2013 14:05:11.741:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\Eigene Videos\Konvert. Nordl.Island 2012\
24.10.2013 14:05:11.743:   dll version 4.8.8.1
24.10.2013 14:05:11.746:   Step 1 of 3, Encodiere Film 1 ...

-------------------------- 24.10.2013 15:06:57 --------------------------

24.10.2013 15:06:57.880:   DLLAV32.DLL loaded, all entry points available
24.10.2013 15:06:57.881:   AVSDK MsgCbFunc registered
24.10.2013 15:06:57.882:   AVSDK: StatCbFunc registered
24.10.2013 15:06:58.008:   AVSDK Version 11.0.233
24.10.2013 15:06:58.010:   ------------ Reading Device Info ----------------
24.10.2013 15:06:58.013:   AVSDK: 1 device(s) found
24.10.2013 15:06:58.015:   BurnSupport: 1 device(s) found
24.10.2013 15:06:58.017:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
24.10.2013 15:06:58.020:   BurnSupport: 1 record device(s) available
24.10.2013 15:06:58.020:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
24.10.2013 15:06:58.020:   ------------ done ----------------
24.10.2013 15:06:58.194:   setting no speed limit
24.10.2013 15:07:06.693:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6 -- bd project 2013-10-24
24.10.2013 15:07:06.694:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\Eigene Videos\Konvert. Nordl.Island 2012\
24.10.2013 15:07:06.695:   dll version 4.8.8.1
24.10.2013 15:07:06.698:   Step 1 of 3, Encodiere Film 1 ...

-------------------------- 24.10.2013 15:59:18 --------------------------

24.10.2013 15:59:18.117:   DLLAV32.DLL loaded, all entry points available
24.10.2013 15:59:18.118:   AVSDK MsgCbFunc registered
24.10.2013 15:59:18.120:   AVSDK: StatCbFunc registered
24.10.2013 15:59:18.239:   AVSDK Version 11.0.233
24.10.2013 15:59:18.241:   ------------ Reading Device Info ----------------
24.10.2013 15:59:18.244:   AVSDK: 1 device(s) found
24.10.2013 15:59:18.246:   BurnSupport: 1 device(s) found
24.10.2013 15:59:18.248:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
24.10.2013 15:59:18.250:   BurnSupport: 1 record device(s) available
24.10.2013 15:59:18.253:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
24.10.2013 15:59:18.253:   ------------ done ----------------
24.10.2013 15:59:18.417:   setting no speed limit
24.10.2013 15:59:33.251:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6 -- bd project 2013-10-24
24.10.2013 15:59:33.252:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\Eigene Videos\Konvert. Nordl.Island 2012\
24.10.2013 15:59:33.253:   dll version 4.8.8.1
24.10.2013 15:59:33.256:   Step 1 of 3, Encodiere Film 1 ...

-------------------------- 25.10.2013 12:39:38 --------------------------

25.10.2013 12:39:38.203:   DLLAV32.DLL loaded, all entry points available
25.10.2013 12:39:38.204:   AVSDK MsgCbFunc registered
25.10.2013 12:39:38.205:   AVSDK: StatCbFunc registered
25.10.2013 12:39:38.314:   AVSDK Version 11.0.233
25.10.2013 12:39:38.316:   ------------ Reading Device Info ----------------
25.10.2013 12:39:38.318:   AVSDK: 1 device(s) found
25.10.2013 12:39:38.320:   BurnSupport: 1 device(s) found
25.10.2013 12:39:38.322:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
25.10.2013 12:39:38.325:   BurnSupport: 1 record device(s) available
25.10.2013 12:39:38.327:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
25.10.2013 12:39:38.329:   ------------ done ----------------
25.10.2013 12:39:38.506:   setting no speed limit
25.10.2013 12:39:48.767:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6 -- bd project 2013-10-25
25.10.2013 12:39:48.767:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\Eigene Videos\Konvert. Nordl.Island 2012\
25.10.2013 12:39:48.767:   dll version 4.8.8.1
25.10.2013 12:39:48.770:   Step 1 of 3, Encodiere Film 1 ...

-------------------------- 25.10.2013 15:19:45 --------------------------

25.10.2013 15:19:45.431:   DLLAV32.DLL loaded, all entry points available
25.10.2013 15:19:45.432:   AVSDK MsgCbFunc registered
25.10.2013 15:19:45.433:   AVSDK: StatCbFunc registered
25.10.2013 15:19:45.519:   AVSDK Version 11.0.233
25.10.2013 15:19:45.520:   ------------ Reading Device Info ----------------
25.10.2013 15:19:45.521:   AVSDK: 1 device(s) found
25.10.2013 15:19:45.522:   BurnSupport: 1 device(s) found
25.10.2013 15:19:45.523:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
25.10.2013 15:19:45.524:   BurnSupport: 1 record device(s) available
25.10.2013 15:19:45.525:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
25.10.2013 15:19:45.526:   ------------ done ----------------
25.10.2013 15:19:45.727:   setting no speed limit
25.10.2013 15:19:56.573:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6neu -- bd project 2013-10-25
25.10.2013 15:19:56.574:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\Eigene Videos\Konvert. Nordl.Island 2012\
25.10.2013 15:19:56.575:   dll version 4.8.8.1
25.10.2013 15:19:56.578:   Step 1 of 3, Encodiere Film 1 ...
25.10.2013 15:20:16.716:   Step 1 done
25.10.2013 15:20:16.718:   ERROR: PrepareDVDVideoFiles() failed with errNo 11 - user cancelled
25.10.2013 15:20:16.718:   !!! DBK error in BurnProject: 1 - user cancelled operation !!!

-------------------------- 25.10.2013 15:24:52 --------------------------

25.10.2013 15:24:52.131:   DLLAV32.DLL loaded, all entry points available
25.10.2013 15:24:52.132:   AVSDK MsgCbFunc registered
25.10.2013 15:24:52.134:   AVSDK: StatCbFunc registered
25.10.2013 15:24:52.231:   AVSDK Version 11.0.233
25.10.2013 15:24:52.232:   ------------ Reading Device Info ----------------
25.10.2013 15:24:52.233:   AVSDK: 1 device(s) found
25.10.2013 15:24:52.234:   BurnSupport: 1 device(s) found
25.10.2013 15:24:52.235:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
25.10.2013 15:24:52.237:   BurnSupport: 1 record device(s) available
25.10.2013 15:24:52.237:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
25.10.2013 15:24:52.237:   ------------ done ----------------
25.10.2013 15:24:52.415:   setting no speed limit
25.10.2013 15:24:59.397:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6neu -- bd project 2013-10-25
25.10.2013 15:24:59.397:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\Eigene Videos\Konvert. Nordl.Island 2012\
25.10.2013 15:24:59.397:   dll version 4.8.8.1
25.10.2013 15:24:59.399:   Step 1 of 3, Encodiere Film 1 ...

-------------------------- 25.10.2013 16:10:47 --------------------------

25.10.2013 16:10:47.151:   DLLAV32.DLL loaded, all entry points available
25.10.2013 16:10:47.153:   AVSDK MsgCbFunc registered
25.10.2013 16:10:47.154:   AVSDK: StatCbFunc registered
25.10.2013 16:10:47.234:   AVSDK Version 11.0.233
25.10.2013 16:10:47.235:   ------------ Reading Device Info ----------------
25.10.2013 16:10:47.236:   AVSDK: 1 device(s) found
25.10.2013 16:10:47.237:   BurnSupport: 1 device(s) found
25.10.2013 16:10:47.239:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
25.10.2013 16:10:47.240:   BurnSupport: 1 record device(s) available
25.10.2013 16:10:47.240:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
25.10.2013 16:10:47.240:   ------------ done ----------------
25.10.2013 16:10:47.403:   setting no speed limit
25.10.2013 16:10:53.217:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
25.10.2013 16:10:53.282:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
25.10.2013 16:10:53.283:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
25.10.2013 16:10:53.283:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
25.10.2013 16:11:02.425:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6neu -- bd project 2013-10-25
25.10.2013 16:11:02.427:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\Eigene Videos\Konvert. Nordl.Island 2012\
25.10.2013 16:11:02.428:   dll version 4.8.8.1
25.10.2013 16:11:02.432:   Step 1 of 3, Encodiere Film 1 ...
25.10.2013 16:15:00.095:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive f:
25.10.2013 16:15:00.095:    DEVICE ARRIVED
25.10.2013 16:15:01.988:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
25.10.2013 16:15:01.998:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 208 - disc is not empty !!!
25.10.2013 16:16:45.103:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive f:
25.10.2013 16:16:45.103:    DEVICE REMOVAL

-------------------------- 25.10.2013 17:30:23 --------------------------

25.10.2013 17:30:23.419:   DLLAV32.DLL loaded, all entry points available
25.10.2013 17:30:23.420:   AVSDK MsgCbFunc registered
25.10.2013 17:30:23.421:   AVSDK: StatCbFunc registered
25.10.2013 17:30:23.540:   AVSDK Version 11.0.233
25.10.2013 17:30:23.543:   ------------ Reading Device Info ----------------
25.10.2013 17:30:23.545:   AVSDK: 1 device(s) found
25.10.2013 17:30:23.547:   BurnSupport: 1 device(s) found
25.10.2013 17:30:23.549:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
25.10.2013 17:30:23.551:   BurnSupport: 1 record device(s) available
25.10.2013 17:30:23.553:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
25.10.2013 17:30:23.555:   ------------ done ----------------
25.10.2013 17:30:23.728:   setting no speed limit
25.10.2013 17:30:23.728:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
25.10.2013 17:30:23.803:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
25.10.2013 17:30:23.803:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
25.10.2013 17:30:23.804:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
25.10.2013 17:30:33.503:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6neu -- bd project 2013-10-25
25.10.2013 17:30:33.504:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\Eigene Videos\Konvert. Nordl.Island 2012\
25.10.2013 17:30:33.505:   dll version 4.8.8.1
25.10.2013 17:30:33.508:   Step 1 of 3, Encodiere Film 1 ...

-------------------------- 25.10.2013 18:29:30 --------------------------

25.10.2013 18:29:30.880:   DLLAV32.DLL loaded, all entry points available
25.10.2013 18:29:30.882:   AVSDK MsgCbFunc registered
25.10.2013 18:29:30.883:   AVSDK: StatCbFunc registered
25.10.2013 18:29:30.996:   AVSDK Version 11.0.233
25.10.2013 18:29:30.997:   ------------ Reading Device Info ----------------
25.10.2013 18:29:30.998:   AVSDK: 1 device(s) found
25.10.2013 18:29:30.999:   BurnSupport: 1 device(s) found
25.10.2013 18:29:31.000:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
25.10.2013 18:29:31.001:   BurnSupport: 1 record device(s) available
25.10.2013 18:29:31.002:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
25.10.2013 18:29:31.003:   ------------ done ----------------
25.10.2013 18:29:31.160:   setting no speed limit
25.10.2013 18:29:31.160:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
25.10.2013 18:29:31.228:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
25.10.2013 18:29:31.229:   !!! AVSDK error: BeginDiscExplore() calling AvDevOpen(): 102 - no disc in drive !!!
25.10.2013 18:29:31.229:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
25.10.2013 18:29:42.799:   Open Project: ISLAND_2012_DVD2014_BAK9_BAK4_BAK6neu -- bd project 2013-10-25
25.10.2013 18:29:42.800:   VideoMode: PAL   Temp Dir: D:\Eigene Dateien\Eigene Videos\Konvert. Nordl.Island 2012\
25.10.2013 18:29:42.801:   dll version 4.8.8.1
25.10.2013 18:29:42.804:   Step 1 of 3, Encodiere Film 1 ...

-------------------------- 25.10.2013 19:53:29 --------------------------

25.10.2013 19:53:29.250:   DLLAV32.DLL loaded, all entry points available
25.10.2013 19:53:29.251:   AVSDK MsgCbFunc registered
25.10.2013 19:53:29.252:   AVSDK: StatCbFunc registered
25.10.2013 19:53:29.343:   AVSDK Version 11.0.233
25.10.2013 19:53:29.344:   ------------ Reading Device Info ----------------
25.10.2013 19:53:29.345:   AVSDK: 1 device(s) found
25.10.2013 19:53:29.346:   BurnSupport: 1 device(s) found
25.10.2013 19:53:29.347:   Adapter=0  ID=0  LUN=32   F:HL-DT-ST BD-RE  BH10LS38 Revision:1.00
25.10.2013 19:53:29.348:   BurnSupport: 1 record device(s) available
25.10.2013 19:53:29.349:   BurnSupport: F: HL-DT-ST BD-RE  BH10LS38 Rev. 1.00
25.10.2013 19:53:29.349:   ------------ done ----------------
25.10.2013 19:53:29.516:   setting no speed limit
25.10.2013 19:53:29.517:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
25.10.2013

andy50 schrieb am 21.11.2013 um 12:41 Uhr

Hallo FredW,

wäre nett, wenn Du Dir die dbk.log Datei mal anschauen könntest , da das Problem bei einem weiteren Anlauf (der hier in dieser Datei noch nicht efasst ist) erneut auftrat: mehrere Brennversuche, die an der gleichen oder auch an anderer Stelle stoppten, bis dann endlich mal das Encodieren durchlief (ohne dass etwas verändert wurde, nur einfach erneut "Brennen" angeklickt).

Das eigentliche Brennen funktioniert mit MAGIX Fotos auf DVD erst gar nicht: nach dem Encodieren (lt. Angabe in der Maske Schritt 1 bis 3 des Gesamtvorgangs) kommt die Meldung "Brennen erfolgreich", und es gibt keine Möglichkeit fortzufahren und tatsächlich mit diesem Programm zu brennen...

Gruß

andy50