Interne Fehler beim Brennen

Joshy78 schrieb am 22.10.2009 um 11:14 Uhr

hallo zusammen seid 5 tagen kann ich über magix foto auf cd und dvd deluxe 8. hatte schon immer nero und ich konnte brennen, da dieses als fehler in diversen frage antwort thema war. ja ich habe auch einen antivir programm welches ich kurzzeitig deaktiviert habe und es tut sich ichts. habe auch incd aus dem autostart genommen. leider komme ich nicht weiter. ich hoffe hier wird mir geholfen. bedanke mich schon mal im vorfeld.

2.10.2009 11:03:49.609:   Step 6 of 6
22.10.2009 11:03:49.609:   Used burn options:
 simulation: off
 DiscAtOnce: off
 BurnOver: off
 BurnProof: on
 FormatDisc: off
 ShortLeadOut: off
 NoDefectMgmt: off
22.10.2009 11:03:49.609:    Booktype: don't care
22.10.2009 11:03:49.609:   setting write speed to 2770000  bytes/sec
22.10.2009 11:03:49.609:   this equals 2,000000x DVD / 15,702949x CD Speed
22.10.2009 11:03:49.609:   Check on previously direct recorded session...OK
22.10.2009 11:03:54.609:   AVSDK Message - ERROR: :Cannot re-open drive -> drive is in use by another application
22.10.2009 11:03:54.609:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 106 - drive in use by another appl. !!!
22.10.2009 11:03:54.656:   Step 6 done
22.10.2009 11:03:54.656:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 3 - unspecified failure !!!
22.10.2009 11:03:54.656:   ------------ done ----------------
22.10.2009 11:03:54.656:   time: Thu Oct 22 11:03:54 2009

22.10.2009 11:03:54.656:   project burning failed
22.10.2009 11:03:54.656:   !!! DBK error in CBurnDevSupport::BurnProject(): 3 - unspecified failure !!!
22.10.2009 11:03:54.671:   !!! DBK error in BurnProject: 3 - unspecified failure !!!


MFG

Kommentare

geschi schrieb am 22.10.2009 um 11:20 Uhr
Hallo
22.10.2009 11:03:54.609:   AVSDK Message - ERROR: :Cannot re-open drive -> drive is in use by another application

Ich denke das InCD immer noch aktiv ist, sieh einmal hier:
http://support.magix.net/boards/magix/index.php?s=7b9ef433ef690d0a49248a79f080fbd4&showtopic=46830
arbeite alle Punkte durch.
Gruss
Joshy78 schrieb am 22.10.2009 um 11:33 Uhr

geschi , ich danke dir, es war die fehlerhafte dll. mit dem download der brennroutinen war mein problem gelöst.......

merci