Hi,
seit geraumer Zeit kann ich keine DVD mehr brennen, da bei Schritt 6 folgende Fehlermeldung kommt:
interner Fehler bei Bearbeitung
Ich habe Video de Luxe 15 Plus in der aktuellsten Version und Windwos 7
Anbei noch eine detaillierte Fehlermeldung
Kann mir bitte jemand einen guten Rat geben
vielen Dank
12.05.2013 21:34:36.880: Booktype: don't care
12.05.2013 21:34:36.887: setting write speed to 2770000 bytes/sec
12.05.2013 21:34:36.887: this equals 2,000000x DVD / 15,702949x CD Speed
12.05.2013 21:34:36.888: ------------ done: succeeded ----------------
12.05.2013 21:34:36.889: ------------ CreateAPIProject ----------------
12.05.2013 21:34:36.892: Step 4 of 6
12.05.2013 21:34:36.895: creating DVD project in prepfile mode...
12.05.2013 21:34:36.904: create volume... OK
12.05.2013 21:34:36.905: verify option OFF
12.05.2013 21:34:36.940: adding file "C:\Users\Kammerer\Documents\MAGIX_Video_deluxe_15_Plus\Disc Images\DVD Image TEST\VIDEO_TS.IFO"
12.05.2013 21:34:36.975: adding file "C:\Users\Kammerer\Documents\MAGIX_Video_deluxe_15_Plus\Disc Images\DVD Image TEST\VIDEO_TS.VOB"
12.05.2013 21:34:36.989: adding file "C:\Users\Kammerer\Documents\MAGIX_Video_deluxe_15_Plus\Disc Images\DVD Image TEST\VTS_01_1.VOB"
12.05.2013 21:34:37.086: adding file "C:\Users\Kammerer\Documents\MAGIX_Video_deluxe_15_Plus\Disc Images\DVD Image TEST\VTS_01_0.IFO"
12.05.2013 21:34:37.091: Step 4 done
12.05.2013 21:34:37.094: ------------ done ----------------
12.05.2013 21:34:37.095: ------------ BurnToDisc ----------------
12.05.2013 21:34:37.096: time:
12.05.2013 21:34:37.097: Step 5 of 6
12.05.2013 21:34:37.103: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
12.05.2013 21:34:37.104: Booktype: don't care
12.05.2013 21:34:37.105: setting write speed to 2770000 bytes/sec
12.05.2013 21:34:37.107: this equals 2,000000x DVD / 15,702949x CD Speed
12.05.2013 21:34:37.108: Check on previously direct recorded session...OK
12.05.2013 21:34:37.123: AVSDK Message - INFO: :Recording volume ...
12.05.2013 21:34:37.124: AVSDK Status - Begin operation Recording 46976 sectors/frames
12.05.2013 21:34:37.124: time:
12.05.2013 21:34:37.128: AVSDK Message - INFO: :Recording -> writing data ...
12.05.2013 21:34:37.484: wrote LeadIn, start DataCopy
12.05.2013 21:34:37.485: time:
12.05.2013 21:38:01.309: AVSDK Message - ERROR: :Cannot write to disc -> Command timed out, possibly caused by a communication error between host adapter and drive or by a drive malfunction (SK/ASC/ASCQ 0B/2E/00)
12.05.2013 21:38:01.380: AVSDK Status - End operation Recording 46976 sectors/frames
12.05.2013 21:38:01.381: AVSDK Message - INFO: :Recording failed due to write error on disc
12.05.2013 21:38:01.382: !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 206 - write error occurred on disc !!!
12.05.2013 21:38:01.383: Step 5 done
12.05.2013 21:38:01.387: !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 251 - write error occurred on disc !!!
12.05.2013 21:38:01.388: ------------ done ----------------
12.05.2013 21:38:01.389: time:
12.05.2013 21:38:01.389: project burning failed
12.05.2013 21:38:01.395: !!! DBK error in CBurnDevSupport::BurnProject(): 251 - write error occurred on disc !!!
12.05.2013 21:38:01.396: !!! DBK error in BurnProject: 251 - write error occurred on disc !!!