Interner Fehler während der Bearbeitung. Laufwerk wird nicht vollständig unterstützt.

mm-home schrieb am 08.07.2011 um 21:11 Uhr

Jedesmal beim Brennen auf BluRay oder auf DVD bricht Magix Fotos auf CD & DVD 10 Deluxe mit folgender Meldung ab:

Das Brennen wurde mit folgendem Fehler abgebrochen. Interner Fehler während der Bearbeitung. Laufwerk wird nicht vollständig unterstützt.

Die Magix Brennroutinen sind aktualisiert. Die Win7-Treiber der Laufwerke BluRay und der DVD ebenfalls.

Dennoch klappt das Brennen nicht mehr.

Sowohl auf dem LG-Brenner, als auch auf dem DVD-Brenner die gleichen negativen Ergebnisse.

 

Kann jemand helfen?

hier die Log-Daten:

E r r o r :   8 4

E r r o r :   8 4

E r r o r :   8 4

E r r o r :   8 4

E r r o r :   8 4

E r r o r :   8 4

E r r o r :   8 4

E r r o r :   8 4

E r r o r :   8 4

E r r o r :   8 4

E r r o r :   8 4

E r r o r :   8 4

E r r o r :   8 4

E r r o r :   8 4

E r r o r :   8 4

E r r o r :   8 4

E r r o r :   8 4

E r r o r :   8 4

E r r o r :   8 4

07.07.2011 00:27:40.350:   Step 4 done
07.07.2011 00:27:40.381:   AVSDK Message - WARNING: :the host adapter 0 to which the device is connected reports maximum transfer length of 0 bytes. This is not supported and may cause failures.
07.07.2011 00:27:40.412:   AVSDK Message - WARNING: :the host adapter 0 to which the device is connected reports maximum transfer length of 0 bytes. This is not supported and may cause failures.
07.07.2011 00:27:43.111:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
07.07.2011 00:27:43.111:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Command aborted, possibly caused by a communication error between host adapter and drive or by a drive malfunction (SK/ASC/ASCQ 05/FF/FF)
07.07.2011 00:27:43.142:   AVSDK Message - WARNING: :the host adapter 0 to which the device is connected reports maximum transfer length of 0 bytes. This is not supported and may cause failures.
07.07.2011 00:27:45.170:   AVSDK Message - WARNING: :the host adapter 0 to which the device is connected reports maximum transfer length of 0 bytes. This is not supported and may cause failures.
07.07.2011 00:27:45.232:   AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
07.07.2011 00:27:45.232:   AVSDK Message - ERROR: :Cannot get device/media specific information -> Command aborted, possibly caused by a communication error between host adapter and drive or by a drive malfunction (SK/ASC/ASCQ 05/FF/FF)
07.07.2011 00:27:45.248:   Step 5 of 6
07.07.2011 00:27:45.248:   Step 5 done
07.07.2011 00:27:45.248:   ------------ InitializeBurningProcess Point ----------------
07.07.2011 00:27:45.279:   AVSDK Message - WARNING: :the host adapter 0 to which the device is connected reports maximum transfer length of 0 bytes. This is not supported and may cause failures.
07.07.2011 00:27:45.342:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
07.07.2011 00:27:45.342:    Booktype: don't care
07.07.2011 00:27:45.342:   setting write speed to 10338000  bytes/sec
07.07.2011 00:27:45.342:   this equals 7,464260x DVD / 58,605442x CD Speed
07.07.2011 00:27:45.342:   ------------ done: succeeded ----------------
07.07.2011 00:27:45.342:   ------------ CreateAPIProject ----------------
07.07.2011 00:27:45.357:   Step 6 of 6
07.07.2011 00:27:45.357:   creating AVCHD project in prepfile mode...
07.07.2011 00:27:45.357:   create volume... OK
07.07.2011 00:27:45.357:   verify option OFF
07.07.2011 00:27:45.357:   ... deleting "VIDEO_TS" in disc image
07.07.2011 00:27:45.357:   creating directory "BDMV"
07.07.2011 00:27:45.357:   adding file "D:\Magix\Foto Premium 10\Disc Images\AVCHD Image Dresden_2011-06_Fotoshow\BDMV\index.bdmv"
07.07.2011 00:27:45.357:   creating directory "BDMV"

...07.07.2011 00:27:45.966:   Step 6 done
07.07.2011 00:27:45.966:   ------------ done ----------------
07.07.2011 00:27:45.966:   ------------ BurnToDisc ----------------
07.07.2011 00:27:45.966:   Step 6 of 6
07.07.2011 00:27:45.966:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
07.07.2011 00:27:45.981:    Booktype: don't care
07.07.2011 00:27:45.981:   setting write speed to 10338000  bytes/sec
07.07.2011 00:27:45.981:   this equals 7,464260x DVD / 58,605442x CD Speed
07.07.2011 00:27:45.981:   -- Volume mounted --
07.07.2011 00:27:45.981:   -- Recording on "E: HL-DT-ST BD-RE  BH10LS30" --
07.07.2011 00:27:45.981:   -- Medium is "BD-RE" --
07.07.2011 00:27:45.981:   -- Manufacturer "" --
07.07.2011 00:27:46.012:   AVSDK Message - INFO: :Recording volume ...
07.07.2011 00:27:46.012:   AVSDK Status - Begin operation Recording 1812352 sectors/frames
07.07.2011 00:27:46.012:   AVSDK Message - INFO: :Recording -> writing data ...
07.07.2011 00:27:46.012:   AVSDK Message - ERROR: :Cannot seek to packet on disc -> Command aborted, possibly caused by a communication error between host adapter and drive or by a drive malfunction (SK/ASC/ASCQ 05/FF/00)
07.07.2011 00:27:46.106:   AVSDK Status - End operation Recording 1812352 sectors/frames
07.07.2011 00:27:46.106:   AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information

 

Kommentare

mm-home schrieb am 09.07.2011 um 13:47 Uhr

Die Bitrate war auf Default eingestellt. Eine Reduzierung sorgt dafür, dass der Fehler 84 entfällt. Das ändert jedoch leider nichts am Brennproblem, welches bereits beim Formatieren zu beginnen scheint:

07.07.2011 17:38:16.808:    Booktype: don't care
07.07.2011 17:38:16.808:   setting write speed to 10338000  bytes/sec
07.07.2011 17:38:16.808:   this equals 7,464260x DVD / 58,605442x CD Speed
07.07.2011 17:38:16.808:   -- Volume mounted --
07.07.2011 17:38:16.808:   -- Recording on "E: HL-DT-ST BD-RE  BH10LS30" --
07.07.2011 17:38:16.808:   -- Medium is "BD-RE" --
07.07.2011 17:38:16.808:   -- Manufacturer "" --
07.07.2011 17:38:16.839:   AVSDK Message - INFO: :Recording volume ...
07.07.2011 17:38:16.839:   AVSDK Message - INFO: :Recording -> formatting disc to prepare recording ...
07.07.2011 17:38:16.854:   AVSDK Status - Begin operation Formatting disc
07.07.2011 17:38:44.326:   AVSDK Status - End operation Formatting disc
07.07.2011 17:38:46.182:   AVSDK Status - Begin operation Recording 30784 sectors/frames
07.07.2011 17:38:46.198:   AVSDK Message - INFO: :Recording -> writing data ...
07.07.2011 17:38:46.198:   AVSDK Message - ERROR: :Cannot seek to packet on disc -> Command aborted, possibly caused by a communication error between host adapter and drive or by a drive malfunction (SK/ASC/ASCQ 05/FF/00)
07.07.2011 17:38:46.338:   AVSDK Status - End operation Recording 30784 sectors/frames
07.07.2011 17:38:46.354:   AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information
07.07.2011 17:38:46.354:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 100 - drive not fully supported !!!
07.07.2011 17:38:46.354:   Step 5 done
07.07.2011 17:38:46.354:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 210 - drive not fully supported !!!
07.07.2011 17:38:46.354:   ------------ done ----------------
07.07.2011 17:38:46.354:   project burning failed
07.07.2011 17:38:46.354:   !!! DBK error in CBurnDevSupport::BurnProject(): 210 - drive not fully supported !!!
07.07.2011 17:38:46.354:   !!! DBK error in BurnProject: 210 - drive not fully supported !!!
07.07.2011 17:38:48.482:   AVSDK Message - WARNING: :the host adapter 0 to which the device is connected reports maximum transfer length of 0 bytes. This is not supported and may cause failures.
07.07.2011 17:38:48.544:   AVSDK Message - WARNING: :the host adapter 0 to which the device is connected reports maximum transfer length of 0 bytes. This is not supported and may cause failures.

mm-home schrieb am 16.07.2011 um 15:49 Uhr

Der Tip mit dem Motherboard und dem BluRay-Laufwerk war richtig. Nachdem das BluRay-Laufwerk von Win7 erkannt und nicht als CD-Laufwerk deklariert worden ist, konnte ich auch die Firmware aktualisieren. Danach lief alles bestens.