Plötzlich kann ich keine 8.5 GB DVD mit Video de Lux mehr brennen.

juergengiese schrieb am 19.08.2011 um 12:43 Uhr

Hallo,

meine Frage bezieht sich auf Video de Lux 17 Plus.

Plötzlich kann ich keinen Film mehr über 700 MB auf einer 8.5 GB DVD+R mehr brennen (habe schon viele  8.5 GB Filme gebrannt). Wie schon gesagt kleiner Film wird gebrannt. Film auf 4.7 GB brennen ohne Probleme. Andere Programme brennen auf 8.5 GB ohne Probleme

 Anbei die letzte dbk.log Datei.

Wer kann mir helfen?

Vielen Dank im voraus, Jürgen
-------------------------- 18.08.2011 14:14:56 --------------------------

18.08.2011 14:14:56.421:   DLLAV32.DLL loaded, all entry points available
18.08.2011 14:14:56.437:   AVSDK MsgCbFunc registered
18.08.2011 14:14:56.437:   AVSDK: StatCbFunc registered
18.08.2011 14:14:56.546:   AVSDK Version 9.0.193
18.08.2011 14:14:56.546:   ------------ Reading Device Info ----------------
18.08.2011 14:14:56.546:   AVSDK: 2 device(s) found
18.08.2011 14:14:56.546:   Adapter=1  ID=0  LUN=0   Z:HL-DT-ST DVD-RAM GH22NP20 Revision:1.04
18.08.2011 14:14:56.546:   AVSDK: 1 record device(s) available
18.08.2011 14:14:56.546:   ------------ done ----------------
18.08.2011 14:15:07.203:   setting no speed limit
18.08.2011 14:15:07.203:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
18.08.2011 14:15:28.406:   setting no speed limit
18.08.2011 14:15:44.281:   setting no speed limit
18.08.2011 14:16:07.109:   setting no speed limit
18.08.2011 14:16:22.609:   Open Project: Versuch -- dvd project 2011-08-18
18.08.2011 14:16:22.609:   VideoMode: PAL   Temp Dir: F:\Wolfgang\Teil 1\EVERIO_HDD\80.Geb\Brennversuch 1\
18.08.2011 14:16:22.609:   dll version 4.5.6.2
18.08.2011 14:16:22.609:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
18.08.2011 14:16:22.609:   EstimateLayerSplitPoint()...
18.08.2011 14:16:22.609:   Splitpunkt 4271833088 auf Disk mit Größe 738033664
18.08.2011 14:16:22.625:   Title an Stelle 0, Länge 131072, Typ 0
18.08.2011 14:16:22.625:   Title an Stelle 131072, Länge 131072, Typ 0
18.08.2011 14:16:22.625:   Title an Stelle 262144, Länge 737771520, Typ 1
18.08.2011 14:16:22.625:   ... Split möglich nach aktuellem Title, -> Abbruch
18.08.2011 14:16:22.625:   Step 1 of 6, Encodiere Film 1 ...
18.08.2011 15:32:56.203:   Step 1 done
18.08.2011 15:32:56.203:   Step 2 of 6, Encodiere Filmmenü ...
18.08.2011 15:32:58.343:   Step 2 done
18.08.2011 15:32:58.343:   Step 3 of 6, Encodiere Kapitelmenü 1 ...
18.08.2011 15:33:00.312:   Step 3 done
18.08.2011 15:33:00.328:   ConvertMovie() - encoded file: F:\Wolfgang\Teil 1\EVERIO_HDD\80.Geb\Brennversuch 1\DVD Image Versuch\VTS_01_1.VOB
18.08.2011 15:33:00.343:   Step 4 of 6, Disc Image wird erzeugt...
18.08.2011 15:33:13.046:   Step 4 done
18.08.2011 15:33:17.078:   Step 5 of 6
18.08.2011 15:33:17.093:   ---------------------------------------------------------------
18.08.2011 15:33:17.093:   CheckForLayerSplit(size=4273995776, strat=2)
18.08.2011 15:33:17.093:   Step 5 done
18.08.2011 15:33:17.093:   ------------ InitializeBurningProcess Point ----------------
18.08.2011 15:33:17.109:   setting PoINT cache size to 16777216l
18.08.2011 15:33:17.125:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
18.08.2011 15:33:17.125:    Booktype: DVD-ROM
18.08.2011 15:33:17.125:   setting write speed to 5540000  bytes/sec
18.08.2011 15:33:17.125:   this equals 4,000000x DVD / 31,405895x CD Speed
18.08.2011 15:33:17.125:   ------------ done: succeeded ----------------
18.08.2011 15:33:17.125:   ------------ CreateAPIProject ----------------
18.08.2011 15:33:17.125:   Step 6 of 6
18.08.2011 15:33:17.125:   creating DVD project in prepfile mode...
18.08.2011 15:33:17.140:   create volume... OK
18.08.2011 15:33:17.140:   verify option OFF
18.08.2011 15:33:17.140:   adding file "F:\Wolfgang\Teil 1\EVERIO_HDD\80.Geb\Brennversuch 1\DVD Image Versuch\VIDEO_TS.IFO"
18.08.2011 15:33:17.140:   adding file "F:\Wolfgang\Teil 1\EVERIO_HDD\80.Geb\Brennversuch 1\DVD Image Versuch\VIDEO_TS.VOB"
18.08.2011 15:33:17.140:   adding file "F:\Wolfgang\Teil 1\EVERIO_HDD\80.Geb\Brennversuch 1\DVD Image Versuch\VTS_01_1.VOB"
18.08.2011 15:33:17.156:   adding file "F:\Wolfgang\Teil 1\EVERIO_HDD\80.Geb\Brennversuch 1\DVD Image Versuch\VTS_01_0.IFO"
18.08.2011 15:33:17.156:   adding file "F:\Wolfgang\Teil 1\EVERIO_HDD\80.Geb\Brennversuch 1\DVD Image Versuch\VTS_01_0.VOB"
18.08.2011 15:33:17.156:   Step 6 done
18.08.2011 15:33:17.156:   ------------ done ----------------
18.08.2011 15:33:17.156:   ------------ BurnToDisc ----------------
18.08.2011 15:33:17.156:   Step 6 of 6
18.08.2011 15:33:17.171:   Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
18.08.2011 15:33:17.171:    Booktype: DVD-ROM
18.08.2011 15:33:17.171:   setting write speed to 5540000  bytes/sec
18.08.2011 15:33:17.171:   this equals 4,000000x DVD / 31,405895x CD Speed
18.08.2011 15:33:17.171:   Check on previously direct recorded session...OK
18.08.2011 15:33:17.171:   -- Volume mounted --
18.08.2011 15:33:17.171:   -- Recording on "Z: HL-DT-ST DVD-RAM GH22NP20" --
18.08.2011 15:33:17.171:   -- Medium is "DVD+R9DL" --
18.08.2011 15:33:17.171:   -- Manufacturer "RITEK" --
18.08.2011 15:33:17.187:   AVSDK Message - INFO: :Recording volume ...
18.08.2011 15:33:17.187:   AVSDK Message - INFO: :Recording -> setting layer boundary address for DVD+R DL ...
18.08.2011 15:33:17.203:   AVSDK Status - Begin operation Recording 317696 sectors/frames
18.08.2011 15:33:17.218:   AVSDK Message - INFO: :Recording -> writing data ...
18.08.2011 15:33:17.234:   AVSDK Message - ERROR: :Cannot write to disc -> Required command option not supported by drive (SK/ASC/ASCQ 05/24/00)
18.08.2011 15:33:17.265:   AVSDK Status - End operation Recording 317696 sectors/frames
18.08.2011 15:33:17.265:   AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information
18.08.2011 15:33:17.265:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 100 - drive not fully supported !!!
18.08.2011 15:33:17.265:   Step 6 done
18.08.2011 15:33:17.265:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 210 - drive not fully supported !!!
18.08.2011 15:33:17.265:   ------------ done ----------------
18.08.2011 15:33:17.265:   project burning failed
18.08.2011 15:33:17.281:   !!! DBK error in CBurnDevSupport::BurnProject(): 210 - drive not fully supported !!!
18.08.2011 15:33:17.296:   !!! DBK error in BurnProject: 210 - drive not fully supported !!!

Kommentare

Trajan schrieb am 20.08.2011 um 07:30 Uhr

HAllo.

 

Wenn ich nicht täusche....

 

Splitpunkt 4271833088 auf Disk mit Größe 738033664

Der Film passt nicht auf die DVD. Die angegebene Größe ist glaube ich für 8,5 GByte zu klein.  Anscheinend erkennt der Brenner die DVD nicht richtig.
Probiere es mal mit eine 4.7 GB DVD, welche Größe er da erkennt.
Es kommt natürlich auch eine Fehlermeldung. Interressant ist die Größe.

Ist sie Zahl größer als bei der 8,5 GByte DVD, so hat der Brenner mit dem Rohling ein Problem.

Evtl. Firmwareupdate des Brenners oder/und anderer Marke des Rohlings.

 

mfG

marion51 schrieb am 20.08.2011 um 15:10 Uhr

verwende mal einen verbatim rohling.

du kannst aber auch auf deine festplatte exportieren. dort siehst du die echte größe.

gruß