Schreibfehler beim Zugriff auf Disc

ginfis schrieb am 01.11.2010 um 18:46 Uhr

Das Thema geistert schon Jahre rum. Das Problem scheint Magix nicht in den Griff zu bekommen!

Gibt es denn keine einfache lösung, die auch ein Laie, wie ich es bin, versteht und anwenden kann?

In der Werbung sieht alles soooo einfach aus, aber wenn man sich ansieht, dass selbst Fotos auf CD & DVD 10 bei Win7 den Schreibfehler immer wieder meldet, ogwohl verschiedene nagelneue Rohlinge eingesetzt wurden, ist das nur Frustration. Das kann doch nicht Stand der Technik sein!

Der Schreibfehler kommt so häufig vor, warum kann Magix nicht im Begleitheft sofort einen Lösungsvorschlag mit anbieten??

Habe die Versien10 schon 2 Monate und konnte noch keine DVD brennen!

Kommentare

marion51 schrieb am 01.11.2010 um 19:13 Uhr

das mußt du so magix fragen.

wir sind nicht magix

 

gruß

ginfis schrieb am 06.11.2010 um 11:07 Uhr

Hej Fred, danke für deine Antwort. hier die von dir angeforderten

 


-------------------------- 08.10.2010 13:42:57 --------------------------

08.10.2010 13:42:57.177:   DLLAV32.DLL loaded, all entry points available
08.10.2010 13:42:57.177:   AVSDK MsgCbFunc registered
08.10.2010 13:42:57.177:   AVSDK: StatCbFunc registered
08.10.2010 13:42:57.239:   AVSDK Version 9.0.193
08.10.2010 13:42:57.239:   ------------ Reading Device Info ----------------
08.10.2010 13:42:57.239:   AVSDK: 1 device(s) found
08.10.2010 13:42:57.239:   Adapter=0  ID=1  LUN=16   E:HL-DT-ST DVDRAM GT32N Revision:1.00
08.10.2010 13:42:57.239:   AVSDK: 1 record device(s) available
08.10.2010 13:42:57.239:   ------------ done ----------------

-------------------------- 30.10.2010 13:48:40 --------------------------

30.10.2010 13:48:40.120:   DLLAV32.DLL loaded, all entry points available
30.10.2010 13:48:40.120:   AVSDK MsgCbFunc registered
30.10.2010 13:48:40.120:   AVSDK: StatCbFunc registered
30.10.2010 13:48:40.167:   AVSDK Version 9.0.193
30.10.2010 13:48:40.167:   ------------ Reading Device Info ----------------
30.10.2010 13:48:40.167:   AVSDK: 1 device(s) found
30.10.2010 13:48:40.167:   Adapter=0  ID=1  LUN=16   E:HL-DT-ST DVDRAM GT32N Revision:1.00
30.10.2010 13:48:40.167:   AVSDK: 1 record device(s) available
30.10.2010 13:48:40.183:   ------------ done ----------------
30.10.2010 13:48:40.448:   setting no speed limit
30.10.2010 13:48:40.448:   !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
30.10.2010 13:48:40.495:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
30.10.2010 13:48:40.495:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
30.10.2010 13:48:40.495:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
30.10.2010 13:49:35.219:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
30.10.2010 13:49:35.219:       DEVICE ARRIVED
30.10.2010 13:52:00.892:   Open Project: Disc_2010-10-30 -- dvd project 2010-10-30
30.10.2010 13:52:00.892:   VideoMode: PAL   Temp Dir: C:\Users\Alfred\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe\Disc Images\
30.10.2010 13:52:00.892:   dll version 4.5.7.1
30.10.2010 13:52:00.908:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
30.10.2010 13:52:00.908:   EstimateLayerSplitPoint()...
30.10.2010 13:52:00.908:   Splitpunkt 4271833088 auf Disk mit Größe 514785280
30.10.2010 13:52:00.908:   Title an Stelle 0, Länge 131072, Typ 0
30.10.2010 13:52:00.908:   Title an Stelle 131072, Länge 425984, Typ 0
30.10.2010 13:52:00.908:   Title an Stelle 557056, Länge 514228224, Typ 1
30.10.2010 13:52:00.908:   ... Split möglich nach aktuellem Title, -> Abbruch
30.10.2010 13:52:00.908:   Step 1 of 6, Encodiere Film 1 ...
30.10.2010 13:54:27.532:   Step 1 done
30.10.2010 13:54:27.532:   Step 2 of 6, Encodiere Filmmenü ...
30.10.2010 13:54:28.000:   Step 2 done
30.10.2010 13:54:28.000:   Step 3 of 6, Encodiere Kapitelmenü 1 ...
30.10.2010 13:54:37.641:   Step 3 done
30.10.2010 13:54:37.641:   ConvertMovie() - encoded file: C:\Users\Alfred\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe\Disc Images\DVD Image Disc_2010-10-30\VTS_01_1.VOB
30.10.2010 13:54:37.672:   Step 4 of 6, Disc Image wird erzeugt...
30.10.2010 13:54:41.089:   Step 4 done
30.10.2010 13:54:46.315:   Step 5 of 6
30.10.2010 13:54:46.315:   Step 5 done
30.10.2010 13:54:46.330:   ------------ InitializeBurningProcess Point ----------------
30.10.2010 13:54:46.361:   setting PoINT cache size to 16777216l
30.10.2010 13:54:46.361:   Used burn options:
    simulation:    off
    DiscAtOnce:    off
    BurnOver:    off
    BurnProof:    on
    FormatDisc:    off
    ShortLeadOut:    off
    NoDefectMgmt:    off
30.10.2010 13:54:46.361:       Booktype:    don't care
30.10.2010 13:54:46.361:   setting write speed to 3324000  bytes/sec
30.10.2010 13:54:46.361:   this equals 2,400000x DVD / 18,843538x CD Speed
30.10.2010 13:54:46.361:   ------------ done: succeeded ----------------
30.10.2010 13:54:46.361:   ------------ CreateAPIProject ----------------
30.10.2010 13:54:46.377:   Step 6 of 6
30.10.2010 13:54:46.377:   creating DVD project in prepfile mode...
30.10.2010 13:54:46.377:   create volume... OK
30.10.2010 13:54:46.377:   setting verify option to "VerifyByComparingData"
30.10.2010 13:54:46.377:   adding file "C:\Users\Alfred\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe\Disc Images\DVD Image Disc_2010-10-30\VIDEO_TS.IFO"
30.10.2010 13:54:46.377:   adding file "C:\Users\Alfred\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe\Disc Images\DVD Image Disc_2010-10-30\VIDEO_TS.VOB"
30.10.2010 13:54:46.393:   adding file "C:\Users\Alfred\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe\Disc Images\DVD Image Disc_2010-10-30\VTS_01_1.VOB"
30.10.2010 13:54:46.393:   adding file "C:\Users\Alfred\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe\Disc Images\DVD Image Disc_2010-10-30\VTS_01_0.IFO"
30.10.2010 13:54:46.393:   adding file "C:\Users\Alfred\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe\Disc Images\DVD Image Disc_2010-10-30\VTS_01_0.VOB"
30.10.2010 13:54:46.393:   Step 6 done
30.10.2010 13:54:46.393:   ------------ done ----------------
30.10.2010 13:54:46.393:   ------------ BurnToDisc ----------------
30.10.2010 13:54:46.393:   Step 6 of 6
30.10.2010 13:54:46.393:   Used burn options:
    simulation:    off
    DiscAtOnce:    off
    BurnOver:    off
    BurnProof:    on
    FormatDisc:    off
    ShortLeadOut:    off
    NoDefectMgmt:    off
30.10.2010 13:54:46.393:       Booktype:    don't care
30.10.2010 13:54:46.393:   setting write speed to 3324000  bytes/sec
30.10.2010 13:54:46.393:   this equals 2,400000x DVD / 18,843538x CD Speed
30.10.2010 13:54:46.408:   Check on previously direct recorded session...OK
30.10.2010 13:54:46.408:   -- Volume mounted --
30.10.2010 13:54:46.408:   -- Recording on "E: HL-DT-ST DVDRAM GT32N" --
30.10.2010 13:54:46.408:   -- Medium is "DVD+R" --
30.10.2010 13:54:46.408:   -- Manufacturer "CMC MAG" --
30.10.2010 13:54:46.424:   AVSDK Message - INFO: :Recording volume ...
30.10.2010 13:54:46.424:   AVSDK Status - Begin operation Recording 179616 sectors/frames
30.10.2010 13:54:46.424:   AVSDK Message - INFO: :Recording -> writing data ...
30.10.2010 13:54:52.196:   wrote LeadIn, start DataCopy
30.10.2010 13:56:56.996:   AVSDK Message - ERROR: :Cannot write to disc -> Logical block address out of range (SK/ASC/ASCQ 05/21/02)
30.10.2010 13:57:02.097:   AVSDK Status - End operation Recording 179616 sectors/frames
30.10.2010 13:57:02.097:   AVSDK Message - INFO: :Recording failed due to write error on disc
30.10.2010 13:57:02.097:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 206 - write error occurred on disc !!!
30.10.2010 13:57:02.097:   Step 6 done
30.10.2010 13:57:02.097:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 224 - write error occurred on disc !!!
30.10.2010 13:57:02.113:   ------------ done ----------------
30.10.2010 13:57:02.113:   project burning failed
30.10.2010 13:57:02.113:   !!! DBK error in CBurnDevSupport::BurnProject(): 224 - write error occurred on disc !!!
30.10.2010 13:57:02.128:   !!! DBK error in BurnProject: 224 - write error occurred on disc !!!
30.10.2010 14:14:01.214:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
30.10.2010 14:14:01.214:       DEVICE REMOVAL
30.10.2010 14:14:13.850:   AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/02)
30.10.2010 14:14:13.850:   !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
30.10.2010 14:14:13.850:   !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
30.10.2010 14:15:14.219:   WM_DEVICECHANGE( VOLUMECHANGE ) for drive e:
30.10.2010 14:15:14.219:       DEVICE ARRIVED
30.10.2010 14:25:43.646:   setting no speed limit
30.10.2010 14:30:39.596:   setting no speed limit
30.10.2010 14:32:44.452:   setting no speed limit
30.10.2010 14:36:13.859:   Open Project: Disc_2010-10-30 -- dvd project 2010-10-30
30.10.2010 14:36:13.859:   VideoMode: PAL   Temp Dir: C:\Users\Alfred\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe\Disc Images\
30.10.2010 14:36:13.859:   dll version 4.5.7.1
30.10.2010 14:36:13.875:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
30.10.2010 14:36:13.875:   EstimateLayerSplitPoint()...
30.10.2010 14:36:13.875:   Splitpunkt 4271833088 auf Disk mit Größe 514785280
30.10.2010 14:36:13.875:   Title an Stelle 0, Länge 131072, Typ 0
30.10.2010 14:36:13.875:   Title an Stelle 131072, Länge 425984, Typ 0
30.10.2010 14:36:13.875:   Title an Stelle 557056, Länge 514228224, Typ 1
30.10.2010 14:36:13.875:   ... Split möglich nach aktuellem Title, -> Abbruch
30.10.2010 14:36:36.479:   Step 1 of 6, Encodiere Film 1 ...
30.10.2010 14:38:52.574:   Step 1 done
30.10.2010 14:38:52.574:   Step 2 of 6, Encodiere Filmmenü ...
30.10.2010 14:38:53.042:   Step 2 done
30.10.2010 14:38:53.042:   Step 3 of 6, Encodiere Kapitelmenü 1 ...
30.10.2010 14:39:02.714:   Step 3 done
30.10.2010 14:39:02.714:   ConvertMovie() - encoded file: C:\Users\Alfred\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe\Disc Images\DVD Image Disc_2010-10-30\VTS_01_1.VOB
30.10.2010 14:39:02.745:   Step 4 of 6, Disc Image wird erzeugt...
30.10.2010 14:39:05.787:   Step 4 done
30.10.2010 14:39:11.075:   Step 5 of 6
30.10.2010 14:39:11.075:   Step 5 done
30.10.2010 14:39:11.091:   ------------ InitializeBurningProcess Point ----------------
30.10.2010 14:39:11.122:   setting PoINT cache size to 16777216l
30.10.2010 14:39:11.122:   Used burn options:
    simulation:    off
    DiscAtOnce:    off
    BurnOver:    off
    BurnProof:    on
    FormatDisc:    off
    ShortLeadOut:    off
    NoDefectMgmt:    off
30.10.2010 14:39:11.122:       Booktype:    don't care
30.10.2010 14:39:11.122:   setting write speed to 3324000  bytes/sec
30.10.2010 14:39:11.122:   this equals 2,400000x DVD / 18,843538x CD Speed
30.10.2010 14:39:11.122:   ------------ done: succeeded ----------------
30.10.2010 14:39:11.122:   ------------ CreateAPIProject ----------------
30.10.2010 14:39:11.122:   Step 6 of 6
30.10.2010 14:39:11.138:   creating DVD project in prepfile mode...
30.10.2010 14:39:11.138:   create volume... OK
30.10.2010 14:39:11.138:   verify option OFF
30.10.2010 14:39:11.138:   adding file "C:\Users\Alfred\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe\Disc Images\DVD Image Disc_2010-10-30\VIDEO_TS.IFO"
30.10.2010 14:39:11.153:   adding file "C:\Users\Alfred\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe\Disc Images\DVD Image Disc_2010-10-30\VIDEO_TS.VOB"
30.10.2010 14:39:11.153:   adding file "C:\Users\Alfred\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe\Disc Images\DVD Image Disc_2010-10-30\VTS_01_1.VOB"
30.10.2010 14:39:11.153:   adding file "C:\Users\Alfred\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe\Disc Images\DVD Image Disc_2010-10-30\VTS_01_0.IFO"
30.10.2010 14:39:11.153:   adding file "C:\Users\Alfred\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe\Disc Images\DVD Image Disc_2010-10-30\VTS_01_0.VOB"
30.10.2010 14:39:11.153:   Step 6 done
30.10.2010 14:39:11.153:   ------------ done ----------------
30.10.2010 14:39:11.153:   ------------ BurnToDisc ----------------
30.10.2010 14:39:11.169:   Step 6 of 6
30.10.2010 14:39:11.169:   Used burn options:
    simulation:    off
    DiscAtOnce:    off
    BurnOver:    off
    BurnProof:    on
    FormatDisc:    off
    ShortLeadOut:    off
    NoDefectMgmt:    off
30.10.2010 14:39:11.169:       Booktype:    don't care
30.10.2010 14:39:11.169:   setting write speed to 3324000  bytes/sec
30.10.2010 14:39:11.169:   this equals 2,400000x DVD / 18,843538x CD Speed
30.10.2010 14:39:11.169:   Check on previously direct recorded session...OK
30.10.2010 14:39:11.169:   -- Volume mounted --
30.10.2010 14:39:11.169:   -- Recording on "E: HL-DT-ST DVDRAM GT32N" --
30.10.2010 14:39:11.169:   -- Medium is "DVD+R" --
30.10.2010 14:39:11.169:   -- Manufacturer "CMC MAG" --
30.10.2010 14:39:11.184:   AVSDK Message - INFO: :Recording volume ...
30.10.2010 14:39:11.184:   AVSDK Status - Begin operation Recording 157600 sectors/frames
30.10.2010 14:39:11.184:   AVSDK Message - INFO: :Recording -> writing data ...
30.10.2010 14:39:17.346:   wrote LeadIn, start DataCopy
30.10.2010 14:39:51.339:   AVSDK Message - ERROR: :Cannot write to disc -> Logical block address out of range (SK/ASC/ASCQ 05/21/02)
30.10.2010 14:39:56.440:   AVSDK Status - End operation Recording 157600 sectors/frames
30.10.2010 14:39:56.440:   AVSDK Message - INFO: :Recording failed due to write error on disc
30.10.2010 14:39:56.440:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 206 - write error occurred on disc !!!
30.10.2010 14:39:56.440:   Step 6 done
30.10.2010 14:39:56.440:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 224 - write error occurred on disc !!!
30.10.2010 14:39:56.456:   ------------ done ----------------
30.10.2010 14:39:56.456:   project burning failed
30.10.2010 14:39:56.456:   !!! DBK error in CBurnDevSupport::BurnProject(): 224 - write error occurred on disc !!!
30.10.2010 14:39:56.471:   !!! DBK error in BurnProject: 224 - write error occurred on disc !!!
30.10.2010 15:36:19.914:   setting no speed limit
30.10.2010 15:43:46.949:   setting no speed limit
30.10.2010 15:44:04.624:   Open Project: Disc_2010-10-30 -- dvd project 2010-10-30
30.10.2010 15:44:04.624:   VideoMode: PAL   Temp Dir: C:\Users\Alfred\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe\Disc Images\
30.10.2010 15:44:04.624:   dll version 4.5.7.1
30.10.2010 15:44:04.624:   PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
30.10.2010 15:44:04.624:   EstimateLayerSplitPoint()...
30.10.2010 15:44:04.624:   Splitpunkt 4271833088 auf Disk mit Größe 514785280
30.10.2010 15:44:04.624:   Title an Stelle 0, Länge 131072, Typ 0
30.10.2010 15:44:04.624:   Title an Stelle 131072, Länge 425984, Typ 0
30.10.2010 15:44:04.624:   Title an Stelle 557056, Länge 514228224, Typ 1
30.10.2010 15:44:04.624:   ... Split möglich nach aktuellem Title, -> Abbruch
30.10.2010 15:44:21.191:   Step 1 of 6, Encodiere Film 1 ...
30.10.2010 15:46:38.798:   Step 1 done
30.10.2010 15:46:38.798:   Step 2 of 6, Encodiere Filmmenü ...
30.10.2010 15:46:39.251:   Step 2 done
30.10.2010 15:46:39.251:   Step 3 of 6, Encodiere Kapitelmenü 1 ...
30.10.2010 15:46:49.001:   Step 3 done
30.10.2010 15:46:49.001:   ConvertMovie() - encoded file: C:\Users\Alfred\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe\Disc Images\DVD Image Disc_2010-10-30\VTS_01_1.VOB
30.10.2010 15:46:49.032:   Step 4 of 6, Disc Image wird erzeugt...
30.10.2010 15:46:52.090:   Step 4 done
30.10.2010 15:46:57.409:   Step 5 of 6
30.10.2010 15:46:57.409:   Step 5 done
30.10.2010 15:46:57.409:   ------------ InitializeBurningProcess Point ----------------
30.10.2010 15:46:57.440:   setting PoINT cache size to 16777216l
30.10.2010 15:46:57.440:   Used burn options:
    simulation:    off
    DiscAtOnce:    off
    BurnOver:    off
    BurnProof:    on
    FormatDisc:    off
    ShortLeadOut:    off
    NoDefectMgmt:    off
30.10.2010 15:46:57.456:       Booktype:    don't care
30.10.2010 15:46:57.456:   setting write speed to 3324000  bytes/sec
30.10.2010 15:46:57.456:   this equals 2,400000x DVD / 18,843538x CD Speed
30.10.2010 15:46:57.456:   ------------ done: succeeded ----------------
30.10.2010 15:46:57.456:   ------------ CreateAPIProject ----------------
30.10.2010 15:46:57.456:   Step 6 of 6
30.10.2010 15:46:57.456:   creating DVD project in prepfile mode...
30.10.2010 15:46:57.472:   create volume... OK
30.10.2010 15:46:57.472:   verify option OFF
30.10.2010 15:46:57.472:   adding file "C:\Users\Alfred\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe\Disc Images\DVD Image Disc_2010-10-30\VIDEO_TS.IFO"
30.10.2010 15:46:57.472:   adding file "C:\Users\Alfred\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe\Disc Images\DVD Image Disc_2010-10-30\VIDEO_TS.VOB"
30.10.2010 15:46:57.472:   adding file "C:\Users\Alfred\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe\Disc Images\DVD Image Disc_2010-10-30\VTS_01_1.VOB"
30.10.2010 15:46:57.487:   adding file "C:\Users\Alfred\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe\Disc Images\DVD Image Disc_2010-10-30\VTS_01_0.IFO"
30.10.2010 15:46:57.487:   adding file "C:\Users\Alfred\Documents\MAGIX\Fotos_auf_CD_DVD_10_Deluxe\Disc Images\DVD Image Disc_2010-10-30\VTS_01_0.VOB"
30.10.2010 15:46:57.487:   Step 6 done
30.10.2010 15:46:57.487:   ------------ done ----------------
30.10.2010 15:46:57.487:   ------------ BurnToDisc ----------------
30.10.2010 15:46:57.487:   Step 6 of 6
30.10.2010 15:46:57.503:   Used burn options:
    simulation:    off
    DiscAtOnce:    off
    BurnOver:    off
    BurnProof:    on
    FormatDisc:    off
    ShortLeadOut:    off
    NoDefectMgmt:    off
30.10.2010 15:46:57.503:       Booktype:    don't care
30.10.2010 15:46:57.503:   setting write speed to 3324000  bytes/sec
30.10.2010 15:46:57.503:   this equals 2,400000x DVD / 18,843538x CD Speed
30.10.2010 15:46:57.503:   Check on previously direct recorded session...OK
30.10.2010 15:46:57.503:   -- Volume mounted --
30.10.2010 15:46:57.503:   -- Recording on "E: HL-DT-ST DVDRAM GT32N" --
30.10.2010 15:46:57.503:   -- Medium is "DVD+R" --
30.10.2010 15:46:57.503:   -- Manufacturer "CMC MAG" --
30.10.2010 15:46:57.518:   AVSDK Message - INFO: :Recording volume ...
30.10.2010 15:46:57.518:   AVSDK Status - Begin operation Recording 157616 sectors/frames
30.10.2010 15:46:57.518:   AVSDK Message - INFO: :Recording -> writing data ...
30.10.2010 15:47:03.103:   wrote LeadIn, start DataCopy
30.10.2010 15:47:07.097:   AVSDK Message - ERROR: :Cannot write to disc -> Logical block address out of range (SK/ASC/ASCQ 05/21/02)
30.10.2010 15:47:12.198:   AVSDK Status - End operation Recording 157616 sectors/frames
30.10.2010 15:47:12.198:   AVSDK Message - INFO: :Recording failed due to write error on disc
30.10.2010 15:47:12.198:   !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 206 - write error occurred on disc !!!
30.10.2010 15:47:12.198:   Step 6 done
30.10.2010 15:47:12.214:   !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 224 - write error occurred on disc !!!
30.10.2010 15:47:12.214:   ------------ done ----------------
30.10.2010 15:47:12.214:   project burning failed
30.10.2010 15:47:12.214:   !!! DBK error in CBurnDevSupport::BurnProject(): 224 - write error occurred on disc !!!
30.10.2010 15:47:12.229:   !!! DBK error in BurnProject: 224 - write error occurred on disc !!!