Was kann ich tun, damit das "Encodieren" des Films klappt

Nadou schrieb am 31.08.2010 um 14:41 Uhr

Wenn ich brennen will, kommt die Meldung "Encodieren fehlgeschlagen".

Ich kann den Film nicht brennen. könnte ihr mir helfen ?

 

Anbei noch die Daten des PC's sowie das LOG-File :

 

> Product:    Video deluxe (Version: Video Deluxe 16 plus Sonderedition)
> OS:          Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
> CPU:        (1) AMD Athlon(tm) 64 Processor 3000+; 1998 MHz
> RAM:        1535 MB, 475724 KB free (31%)
> DirectX:    4.09.00.0904
> Graphic:    ASUS RADEON A9200SE on HP w2007 Wide LCD Monitor with 1280x768
> Sound:      (1) VIA AC\'97 Audio (WAVE)
> Browser:    Mozilla/5.0 (Windows; U; Windows NT 5.1; de; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8 (.NET CLR 3.5.30729)
> Firewall:   
> Mobile:     
> Registered: 
NONE

> Mein Problem :
Ich habe 2 verschiedene DVD's erstellt. beide kann ich
> korrekterweise auf dem PC anschauen. Ich wollte beide brennen doch als
es
> dem Ende zuging gab es mir, dass beim encodieren einen Fehler aufgetrten
> ist.

Untenstehend das LOG-File vielleicht kann es Ihnen mehr Infos dazu
> geben.

Das brennen geht nicht, ich habe es bei beiden DVD's versucht,
> doch beide male geht es nicht.

Koennen Sie mir da weiter helfen ? Ich
> braeuchte dies dringends bis am Donnerstag Abend auf DVD.

Herzlichen
> Dank fuer Ihre prompte Rueckmeldung.

Nadja

LOG-FILE :
>
------------------------- 29.08.2010 21:41:22
> --------------------------

29.08.2010 21:41:22.796:  DLLAV32.DLL
> loaded, all entry points available
29.08.2010 21:41:22.796:  AVSDK
> MsgCbFunc registered
29.08.2010 21:41:22.796:  AVSDK: StatCbFunc
> registered
29.08.2010 21:41:23.140:  AVSDK Version 9.0.193
29.08.2010
> 21:41:23.140:  ------------ Reading Device Info
> ----------------
29.08.2010 21:41:23.140:  AVSDK: 2 device(s)
> found
29.08.2010 21:41:23.140:  Adapter=1  ID=1  LUN=0  E:ATAPI iHAP322
>  9 Revision:6L1F
29.08.2010 21:41:23.156:  AVSDK: 1 record device(s)
> available
29.08.2010 21:41:23.156:  ------------ done
> ----------------
29.08.2010 21:41:23.562:  setting no speed
> limit
29.08.2010 21:41:23.578:  !!! DBK error in
> CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid
device
> !!!
29.08.2010 21:41:37.703:  Open Project: Flo_&_Danou -- dvd project
> 2010-08-29
29.08.2010 21:41:37.703:  VideoMode: PAL  Temp Dir:
> C:\Dokumente und Einstellungen\Bernhard\Eigene
> Dateien\MAGIX_Video_deluxe_16_Plus_Sonderedition\Disc
> Images\
29.08.2010 21:41:37.703:  dll version 4.4.4.6
29.08.2010
> 21:41:37.703:  PrepareDVDVideoFiles() - Abschaetzen des
> Splitpunktes
29.08.2010 21:41:37.703: 
> EstimateLayerSplitPoint()...
29.08.2010 21:41:37.718:  Splitpunkt
> 4271833088 auf Disk mit Groesse 1768128512
29.08.2010 21:41:37.718: 
> Title an Stelle 0, Laenge 131072, Typ 0
29.08.2010 21:41:37.718:  Title
> an Stelle 131072, Laenge 131072, Typ 0
29.08.2010 21:41:37.718:  Title an
> Stelle 262144, Laenge 1767866368, Typ 1
29.08.2010 21:41:37.718:  ...
> Split moeglich nach aktuellem Title, -> Abbruch
29.08.2010 21:41:37.718: 
> Step 1 of 6, Encodiere Film 1 ...
29.08.2010 22:39:41.921:  Step 1
> done
29.08.2010 22:39:41.921:  ERROR: PrepareDVDVideoFiles() failed with
> errNo 5 - encoding failed
29.08.2010 22:39:41.921:  !!! DBK error in
> BurnProject: 10 - movie encoding failed !!!

--------------------------
> 30.08.2010 07:14:05 --------------------------

30.08.2010 07:14:05.843:
>  DLLAV32.DLL loaded, all entry points available
30.08.2010 07:14:05.843: 
> AVSDK MsgCbFunc registered
30.08.2010 07:14:05.843:  AVSDK: StatCbFunc
> registered
30.08.2010 07:14:06.171:  AVSDK Version 9.0.193
30.08.2010
> 07:14:06.171:  ------------ Reading Device Info
> ----------------
30.08.2010 07:14:06.171:  AVSDK: 2 device(s)
> found
30.08.2010 07:14:06.171:  Adapter=1  ID=1  LUN=0  E:ATAPI iHAP322
>  9 Revision:6L1F
30.08.2010 07:14:06.171:  AVSDK: 1 record device(s)
> available
30.08.2010 07:14:06.171:  ------------ done
> ----------------
30.08.2010 07:14:06.484:  setting no speed
> limit
30.08.2010 07:14:06.484:  !!! DBK error in
> CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid
device
> !!!
30.08.2010 07:14:13.843:  Open Project: Flo_&_Danou_DVD_le_soir --
> dvd project 2010-08-30
30.08.2010 07:14:13.859:  VideoMode: PAL  Temp
> Dir: C:\Dokumente und Einstellungen\Bernhard\Eigene
> Dateien\MAGIX_Video_deluxe_16_Plus_Sonderedition\Disc
> Images\
30.08.2010 07:14:13.859:  dll version 4.4.4.6
30.08.2010
> 07:14:13.859:  PrepareDVDVideoFiles() - Abschaetzen des
> Splitpunktes
30.08.2010 07:14:13.859: 
> EstimateLayerSplitPoint()...
30.08.2010 07:14:13.859:  Splitpunkt
> 4271833088 auf Disk mit Groesse 1549697024
30.08.2010 07:14:13.859: 
> Title an Stelle 0, Laenge 131072, Typ 0
30.08.2010 07:14:13.859:  Title
> an Stelle 131072, Laenge 131072, Typ 0
30.08.2010 07:14:13.859:  Title an
> Stelle 262144, Laenge 1549434880, Typ 1
30.08.2010 07:14:13.859:  ...
> Split moeglich nach aktuellem Title, -> Abbruch
30.08.2010 07:14:13.859: 
> Step 1 of 6, Encodiere Film 1 ...
30.08.2010 07:55:23.609:  Step 1
> done
30.08.2010 07:55:23.609:  ERROR: PrepareDVDVideoFiles() failed with
> errNo 5 - encoding failed
30.08.2010 07:55:23.625:  !!! DBK error in
> BurnProject: 10 - movie encoding failed !!!
30.08.2010 18:14:59.109: 
> setting no speed limit
30.08.2010 18:15:05.187:  Open Project:
> Flo_&_Danou_DVD_le_soir -- dvd project 2010-08-30
30.08.2010 18:15:05.187:
>  VideoMode: PAL  Temp Dir: C:\Dokumente und
> Einstellungen\Bernhard\Eigene
> Dateien\MAGIX_Video_deluxe_16_Plus_Sonderedition\Disc
> Images\
30.08.2010 18:15:05.187:  dll version 4.4.4.6
30.08.2010
> 18:15:05.203:  PrepareDVDVideoFiles() - Abschaetzen des
> Splitpunktes
30.08.2010 18:15:05.203: 
> EstimateLayerSplitPoint()...
30.08.2010 18:15:05.203:  Splitpunkt
> 4271833088 auf Disk mit Groesse 1549697024
30.08.2010 18:15:05.203: 
> Title an Stelle 0, Laenge 131072, Typ 0
30.08.2010 18:15:05.203:  Title
> an Stelle 131072, Laenge 131072, Typ 0
30.08.2010 18:15:05.203:  Title an
> Stelle 262144, Laenge 1549434880, Typ 1
30.08.2010 18:15:05.203:  ...
> Split moeglich nach aktuellem Title, -> Abbruch
30.08.2010 18:17:19.734: 
> Step 1 of 6, Encodiere Film 1 ...
30.08.2010 18:17:19.734:  Step 1
> done
30.08.2010 18:17:19.734:  Step 2 of 6, Encodiere Filmmenue
> ...
30.08.2010 18:17:20.859:  Step 2 done
30.08.2010 18:17:20.859: 
> Step 3 of 6, Encodiere Kapitelmenue 1 ...
30.08.2010 18:17:20.859:  Step
> 3 done
30.08.2010 18:17:20.859:  ConvertMovie() - encoded file:
> C:\Dokumente und Einstellungen\Bernhard\Eigene
> Dateien\MAGIX_Video_deluxe_16_Plus_Sonderedition\Disc Images\DVD Image
> Flo_&_Danou_DVD_le_soir\VTS_01_1.VOB
30.08.2010 18:17:20.859:  Step 4 of
> 6, Disc Image wird erzeugt...
30.08.2010 18:18:06.750:  Step 4
> done
30.08.2010 18:18:09.656:  Step 5 of 6
30.08.2010 18:18:09.656: 
> Step 5 done
30.08.2010 18:18:09.671:  ------------
> InitializeBurningProcess Point ----------------
30.08.2010 18:18:09.734: 
> setting PoINT cache size to 16777216l
30.08.2010 18:18:09.734:  Used burn
> options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
30.08.2010
> 18:18:09.734:  Booktype: don't care
30.08.2010 18:18:09.750:  setting
> write speed to 11080000  bytes/sec
30.08.2010 18:18:09.750:  this equals
> 8.000000x DVD / 62.811794x CD Speed
30.08.2010 18:18:09.750: 
> ------------ done: succeeded ----------------
30.08.2010 18:18:09.750: 
> ------------ CreateAPIProject ----------------
30.08.2010 18:18:09.750: 
> Step 6 of 6
30.08.2010 18:18:09.750:  creating DVD project in prepfile
> mode...
30.08.2010 18:18:09.859:  create volume... OK
30.08.2010
> 18:18:09.859:  verify option OFF
30.08.2010 18:18:09.859:  adding file
> "C:\Dokumente und Einstellungen\Bernhard\Eigene
> Dateien\MAGIX_Video_deluxe_16_Plus_Sonderedition\Disc Images\DVD Image
> Flo_&_Danou_DVD_le_soir\VIDEO_TS.IFO"
30.08.2010 18:18:09.859:  adding
> file "C:\Dokumente und Einstellungen\Bernhard\Eigene
> Dateien\MAGIX_Video_deluxe_16_Plus_Sonderedition\Disc Images\DVD Image
> Flo_&_Danou_DVD_le_soir\VIDEO_TS.VOB"
30.08.2010 18:18:09.953:  adding
> file "C:\Dokumente und Einstellungen\Bernhard\Eigene
> Dateien\MAGIX_Video_deluxe_16_Plus_Sonderedition\Disc Images\DVD Image
> Flo_&_Danou_DVD_le_soir\VTS_01_1.VOB"
30.08.2010 18:18:09.953:  adding
> file "C:\Dokumente und Einstellungen\Bernhard\Eigene
> Dateien\MAGIX_Video_deluxe_16_Plus_Sonderedition\Disc Images\DVD Image
> Flo_&_Danou_DVD_le_soir\VTS_01_0.IFO"
30.08.2010 18:18:09.953:  Step 6
> done
30.08.2010 18:18:09.953:  ------------ done
> ----------------
30.08.2010 18:18:09.953:  ------------ BurnToDisc
> ----------------
30.08.2010 18:18:09.953:  Step 6 of 6
30.08.2010
> 18:18:09.953:  Used burn
> options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
30.08.2010
> 18:18:09.953:  Booktype: don't care
30.08.2010 18:18:09.953:  setting
> write speed to 11080000  bytes/sec
30.08.2010 18:18:09.953:  this equals
> 8.000000x DVD / 62.811794x CD Speed
30.08.2010 18:18:09.968:  Check on
> previously direct recorded session...OK
30.08.2010 18:18:09.968:  --
> Volume mounted --
30.08.2010 18:18:09.968:  -- Recording on "E: ATAPI
> iHAP322  9" --
30.08.2010 18:18:09.968:  -- Medium is "DVD-R"
> --
30.08.2010 18:18:09.968:  -- Manufacturer "RITEKF1" --
30.08.2010
> 18:18:09.984:  AVSDK Message - INFO: :Recording volume ...
30.08.2010
> 18:18:10.125:  AVSDK Status - Begin operation Recording 397712
> sectors/frames
30.08.2010 18:18:10.125:  AVSDK Message - INFO: :Recording
> -> writing data ...
30.08.2010 18:18:14.406:  wrote LeadIn, start
> DataCopy
30.08.2010 18:20:20.109:  writing leadout and closing
> disc
30.08.2010 18:20:54.062:  writing leadout and closing
> disc
30.08.2010 18:20:54.062:  AVSDK Status - End operation Recording
> 397712 sectors/frames
30.08.2010 18:20:54.062:  AVSDK Message - INFO:
> :Recording successfully completed
30.08.2010 18:20:55.125:  Step 6
> done
30.08.2010 18:20:55.125:  ------------ done
> ----------------
30.08.2010 18:25:24.671:  WM_DEVICECHANGE( VOLUMECHANGE
> ) for drive e:
30.08.2010 18:25:24.671:  DEVICE
> REMOVAL

-------------------------- 30.08.2010 18:30:55
> --------------------------

30.08.2010 18:30:55.687:  DLLAV32.DLL
> loaded, all entry points available
30.08.2010 18:30:55.687:  AVSDK
> MsgCbFunc registered
30.08.2010 18:30:55.687:  AVSDK: StatCbFunc
> registered
30.08.2010 18:30:55.921:  AVSDK Version 9.0.193
30.08.2010
> 18:30:55.921:  ------------ Reading Device Info
> ----------------
30.08.2010 18:30:55.921:  AVSDK: 2 device(s)
> found
30.08.2010 18:30:55.921:  Adapter=1  ID=1  LUN=0  E:ATAPI iHAP322
>  9 Revision:6L1F
30.08.2010 18:30:55.921:  AVSDK: 1 record device(s)
> available
30.08.2010 18:30:55.921:  ------------ done
> ----------------
30.08.2010 18:30:56.265:  setting no speed
> limit
30.08.2010 18:30:56.265:  !!! DBK error in
> CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid
device
> !!!
30.08.2010 18:31:05.000:  Open Project: Flo_&_Danou -- dvd project
> 2010-08-30
30.08.2010 18:31:05.000:  VideoMode: PAL  Temp Dir:
> C:\Dokumente und Einstellungen\Bernhard\Eigene
> Dateien\MAGIX_Video_deluxe_16_Plus_Sonderedition\Disc
> Images\
30.08.2010 18:31:05.000:  dll version 4.4.4.6
30.08.2010
> 18:31:05.015:  PrepareDVDVideoFiles() - Abschaetzen des
> Splitpunktes
30.08.2010 18:31:05.015: 
> EstimateLayerSplitPoint()...
30.08.2010 18:31:05.015:  Splitpunkt
> 4271833088 auf Disk mit Groesse 1768128512
30.08.2010 18:31:05.015: 
> Title an Stelle 0, Laenge 131072, Typ 0
30.08.2010 18:31:05.015:  Title
> an Stelle 131072, Laenge 131072, Typ 0
30.08.2010 18:31:05.015:  Title an
> Stelle 262144, Laenge 1767866368, Typ 1
30.08.2010 18:31:05.015:  ...
> Split moeglich nach aktuellem Title, -> Abbruch
30.08.2010 18:31:06.609: 
> Step 1 of 6, Encodiere Film 1 ...
30.08.2010 18:31:06.609:  Step 1
> done
30.08.2010 18:31:06.625:  Step 2 of 6, Encodiere Filmmenue
> ...
30.08.2010 18:31:07.343:  Step 2 done
30.08.2010 18:31:07.343: 
> Step 3 of 6, Encodiere Kapitelmenue 1 ...
30.08.2010 18:31:07.343:  Step
> 3 done
30.08.2010 18:31:07.359:  ConvertMovie() - encoded file:
> C:\Dokumente und Einstellungen\Bernhard\Eigene
> Dateien\MAGIX_Video_deluxe_16_Plus_Sonderedition\Disc Images\DVD Image
> Flo_&_Danou\VTS_01_1.VOB
30.08.2010 18:31:07.359:  Step 4 of 6, Disc
> Image wird erzeugt...
30.08.2010 18:31:52.265:  Step 4 done
30.08.2010
> 18:31:54.828:  Step 5 of 6
30.08.2010 18:31:54.828:  Step 5
> done
30.08.2010 18:31:54.828:  ------------ InitializeBurningProcess
> Point ----------------
30.08.2010 18:31:54.906:  setting PoINT cache size
> to 16777216l
30.08.2010 18:31:54.906:  Used burn
> options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
30.08.2010
> 18:31:54.906:  Booktype: don't care
30.08.2010 18:31:54.906:  setting
> write speed to 11080000  bytes/sec
30.08.2010 18:31:54.906:  this equals
> 8.000000x DVD / 62.811794x CD Speed
30.08.2010 18:31:54.906: 
> ------------ done: succeeded ----------------
30.08.2010 18:31:54.906: 
> ------------ CreateAPIProject ----------------
30.08.2010 18:31:54.906: 
> Step 6 of 6
30.08.2010 18:31:54.906:  creating DVD project in prepfile
> mode...
30.08.2010 18:31:55.187:  create volume... OK
30.08.2010
> 18:31:55.187:  verify option OFF
30.08.2010 18:31:55.187:  adding file
> "C:\Dokumente und Einstellungen\Bernhard\Eigene
> Dateien\MAGIX_Video_deluxe_16_Plus_Sonderedition\Disc Images\DVD Image
> Flo_&_Danou\VIDEO_TS.IFO"
30.08.2010 18:31:55.187:  adding file
> "C:\Dokumente und Einstellungen\Bernhard\Eigene
> Dateien\MAGIX_Video_deluxe_16_Plus_Sonderedition\Disc Images\DVD Image
> Flo_&_Danou\VIDEO_TS.VOB"
30.08.2010 18:31:55.312:  adding file
> "C:\Dokumente und Einstellungen\Bernhard\Eigene
> Dateien\MAGIX_Video_deluxe_16_Plus_Sonderedition\Disc Images\DVD Image
> Flo_&_Danou\VTS_01_1.VOB"
30.08.2010 18:31:55.312:  adding file
> "C:\Dokumente und Einstellungen\Bernhard\Eigene
> Dateien\MAGIX_Video_deluxe_16_Plus_Sonderedition\Disc Images\DVD Image
> Flo_&_Danou\VTS_01_0.IFO"
30.08.2010 18:31:55.312:  Step 6
> done
30.08.2010 18:31:55.312:  ------------ done
> ----------------
30.08.2010 18:31:55.312:  ------------ BurnToDisc
> ----------------
30.08.2010 18:31:55.312:  Step 6 of 6
30.08.2010
> 18:31:55.312:  Used burn
> options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
30.08.2010
> 18:31:55.328:  Booktype: don't care
30.08.2010 18:31:55.328:  setting
> write speed to 11080000  bytes/sec
30.08.2010 18:31:55.328:  this equals
> 8.000000x DVD / 62.811794x CD Speed
30.08.2010 18:31:55.328:  Check on
> previously direct recorded session...OK
30.08.2010 18:31:55.328:  --
> Volume mounted --
30.08.2010 18:31:55.328:  -- Recording on "E: ATAPI
> iHAP322  9" --
30.08.2010 18:31:55.328:  -- Medium is "DVD-R"
> --
30.08.2010 18:31:55.328:  -- Manufacturer "RITEKF1" --
30.08.2010
> 18:31:55.421:  AVSDK Message - INFO: :Recording volume ...
30.08.2010
> 18:31:55.484:  AVSDK Status - Begin operation Recording 437312
> sectors/frames
30.08.2010 18:31:55.484:  AVSDK Message - INFO: :Recording
> -> writing data ...
30.08.2010 18:32:03.281:  wrote LeadIn, start
> DataCopy
30.08.2010 18:34:12.140:  writing leadout and closing
> disc
30.08.2010 18:34:37.765:  writing leadout and closing
> disc
30.08.2010 18:34:37.765:  AVSDK Status - End operation Recording
> 437312 sectors/frames
30.08.2010 18:34:37.765:  AVSDK Message - INFO:
> :Recording successfully completed
30.08.2010 18:34:38.671:  Step 6
> done
30.08.2010 18:34:38.671:  ------------ done
> ----------------
30.08.2010 18:37:00.828:  WM_DEVICECHANGE( VOLUMECHANGE
> ) for drive e:
30.08.2010 18:37:00.828:  DEVICE REMOVAL
30.08.2010
> 19:10:46.125:  setting no speed limit
30.08.2010 19:10:54.781:  Open
> Project: Flo_&_Danou -- dvd project 2010-08-30
30.08.2010 19:10:54.781: 
> VideoMode: PAL  Temp Dir: C:\Dokumente und
> Einstellungen\Bernhard\Eigene
> Dateien\MAGIX_Video_deluxe_16_Plus_Sonderedition\Disc
> Images\
30.08.2010 19:10:54.781:  dll version 4.4.4.6
30.08.2010
> 19:10:54.781:  PrepareDVDVideoFiles() - Abschaetzen des
> Splitpunktes
30.08.2010 19:10:54.781: 
> EstimateLayerSplitPoint()...
30.08.2010 19:10:54.796:  Splitpunkt
> 4271833088 auf Disk mit Groesse 1768128512
30.08.2010 19:10:54.796: 
> Title an Stelle 0, Laenge 131072, Typ 0
30.08.2010 19:10:54.796:  Title
> an Stelle 131072, Laenge 131072, Typ 0
30.08.2010 19:10:54.796:  Title an
> Stelle 262144, Laenge 1767866368, Typ 1
30.08.2010 19:10:54.796:  ...
> Split moeglich nach aktuellem Title, -> Abbruch
30.08.2010 19:10:56.921: 
> Step 1 of 6, Encodiere Film 1 ...
30.08.2010 20:03:17.140:  Step 1
> done
30.08.2010 20:03:17.140:  ERROR: PrepareDVDVideoFiles() failed with
> errNo 5 - encoding failed
30.08.2010 20:03:17.140:  !!! DBK error in
> BurnProject: 10 - movie encoding failed !!!

Kommentare

Nadou schrieb am 31.08.2010 um 16:12 Uhr

Habe ich gemacht - habe das selbe dem Support gesendet aber noch keine Antwort erhalten, deshalb hab ich es hier drin gestellt :-) Aber danke schon mal für deine Rückmeldung.

 

Ja da habe ich mich wohl falsch ausgedrückt - das brennen geht wohl aber es brennt mir nicht die ganze DVD - ca. 15 Minuten des Schlusses fehlt mir und an der Stelle gibt es mir die Meldung "Encodieren fehlgeschlagen"-

 

Ja das bin ich auf alle verwenden. Was muss ich da sonst drücken ?

 

Ok dann werde ich das heute Abend nochmals anschauen.

 

Danke schon mal für deine Rückmeldung.