Hallo,
wir benutzen den Magix Photostory Deluxe, Version 18.1.1.53.
Wir haben folgendes Problem:
Eine Fotoshow wurde mit dem Programm erstellt und soll auf DVD gebrannt werden. Beim Brennen der DVD bricht diese ab. Die DVD ist dann noch nicht fertig. Anbei die Meldungen:
--Das Brennen wurde mit folgendem Fehler abgebrochen:
Interner Fehler während der Bearbeitung
Laufwerk nicht bereit--
Auszug aus dbk Datei:
-------------------------- 18.11.2018 18:28:32 --------------------------
18.11.2018 18:28:32.478: DLLAV32.DLL loaded, all entry points available
18.11.2018 18:28:32.509: AVSDK MsgCbFunc registered
18.11.2018 18:28:32.509: AVSDK: StatCbFunc registered
18.11.2018 18:28:32.649: AVSDK Version 13.0.247
18.11.2018 18:28:32.649: ------------ Reading Device Info ----------------
18.11.2018 18:28:32.649: AVSDK: 1 device(s) found
18.11.2018 18:28:32.649: BurnSupport: 1 device(s) found
18.11.2018 18:28:32.649: Adapter=0 ID=3 LUN=0 E:HL-DT-ST DVDRAM GUE1N Revision:1.00
18.11.2018 18:28:32.649: BurnSupport: 1 record device(s) available
18.11.2018 18:28:32.649: BurnSupport: E: HL-DT-ST DVDRAM GUE1N Rev. 1.00
18.11.2018 18:28:32.649: ------------ done ----------------
18.11.2018 18:28:32.774: setting no speed limit
18.11.2018 18:28:32.774: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
18.11.2018 18:28:40.291: Open Project: URLAUB_SCHWARZWALD -- dvd project 2018-11-18
18.11.2018 18:28:40.291: VideoMode: PAL Temp Dir: C:\Users\akr16\OneDrive\Dokumente\MAGIX\Photostory Deluxe\Disc Images\
18.11.2018 18:28:40.291: dll version 6.0.10.2130
18.11.2018 18:28:40.291: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
18.11.2018 18:28:40.291: EstimateLayerSplitPoint()...
18.11.2018 18:28:40.291: Splitpunkt 4271833088 auf Disk mit Größe 1253474304
18.11.2018 18:28:40.291: Title an Stelle 0, Länge 131072, Typ 0
18.11.2018 18:28:40.291: Title an Stelle 131072, Länge 524288, Typ 0
18.11.2018 18:28:40.291: Title an Stelle 655360, Länge 1252818944, Typ 1
18.11.2018 18:28:40.291: ... Split möglich nach aktuellem Title, -> Abbruch
18.11.2018 18:28:47.355: Step 1 of 5, Encodiere Film 1 ...
18.11.2018 18:32:52.473: Step 1 done
18.11.2018 18:32:52.473: Step 2 of 5, Encodiere Filmmenü ...
18.11.2018 18:32:52.864: Step 2 done
18.11.2018 18:32:52.864: Step 3 of 5, Encodiere Kapitelmenü 1 ...
18.11.2018 18:33:01.007: Step 3 done
18.11.2018 18:33:01.007: ConvertMovie() - encoded file: C:\Users\akr16\OneDrive\Dokumente\MAGIX\Photostory Deluxe\Disc Images\DVD Image URLAUB_SCHWARZWALD\VTS_01_1.VOB
18.11.2018 18:33:01.007: ConvertMovie() - encoded file: C:\Users\akr16\OneDrive\Dokumente\MAGIX\Photostory Deluxe\Disc Images\DVD Image URLAUB_SCHWARZWALD\VTS_01_2.VOB
18.11.2018 18:33:01.039: Step 4 of 5, Disc Image wird erzeugt...
18.11.2018 18:33:04.336: Step 4 done
18.11.2018 18:33:08.508: Step 5 of 5
18.11.2018 18:33:08.508: Step 5 done
18.11.2018 18:33:08.508: requested recorder feature:
18.11.2018 18:33:08.508: cache size: 16,000000.1 MB
18.11.2018 18:33:08.508: write speed: 5410,156250.1 KB/s
18.11.2018 18:33:08.508: book type: 0
18.11.2018 18:33:08.508: burn over: no
18.11.2018 18:33:08.508: simulate: no
18.11.2018 18:33:08.508: disc at once: no
18.11.2018 18:33:08.508: burn proof: no
18.11.2018 18:33:08.508: format disc: no
18.11.2018 18:33:08.508: short leadout: no
18.11.2018 18:33:08.508: no defect mgmt: no
18.11.2018 18:33:08.508: verify after burn:no
18.11.2018 18:33:08.508: ------------ OpenRecorderSetOptions Point ----------------
18.11.2018 18:33:08.602: setting PoINT cache size to 16777216l
18.11.2018 18:33:08.602: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: off
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
18.11.2018 18:33:08.602: Booktype: don't care
18.11.2018 18:33:08.617: setting write speed to 5540000 bytes/sec
18.11.2018 18:33:08.617: this equals 4,000000x DVD / 31,405895x CD Speed
18.11.2018 18:33:08.617: ------------ done: succeeded ----------------
18.11.2018 18:33:08.617: ------------ CreateAPIProject ----------------
18.11.2018 18:33:08.617: Step 5 of 5
18.11.2018 18:33:08.617: creating DVD project in prepfile mode...
18.11.2018 18:33:08.617: create volume... OK
18.11.2018 18:33:08.617: verify option OFF
18.11.2018 18:33:08.617: set project options... OK
18.11.2018 18:33:08.617: adding file "C:\Users\akr16\OneDrive\Dokumente\MAGIX\Photostory Deluxe\Disc Images\DVD Image URLAUB_SCHWARZWALD\VIDEO_TS.IFO"
18.11.2018 18:33:08.617: adding file "C:\Users\akr16\OneDrive\Dokumente\MAGIX\Photostory Deluxe\Disc Images\DVD Image URLAUB_SCHWARZWALD\VIDEO_TS.VOB"
18.11.2018 18:33:08.617: adding file "C:\Users\akr16\OneDrive\Dokumente\MAGIX\Photostory Deluxe\Disc Images\DVD Image URLAUB_SCHWARZWALD\VTS_01_1.VOB"
18.11.2018 18:33:08.617: adding file "C:\Users\akr16\OneDrive\Dokumente\MAGIX\Photostory Deluxe\Disc Images\DVD Image URLAUB_SCHWARZWALD\VTS_01_2.VOB"
18.11.2018 18:33:08.617: adding file "C:\Users\akr16\OneDrive\Dokumente\MAGIX\Photostory Deluxe\Disc Images\DVD Image URLAUB_SCHWARZWALD\VTS_01_0.IFO"
18.11.2018 18:33:08.617: adding file "C:\Users\akr16\OneDrive\Dokumente\MAGIX\Photostory Deluxe\Disc Images\DVD Image URLAUB_SCHWARZWALD\VTS_01_0.VOB"
18.11.2018 18:33:08.617: Step 5 done
18.11.2018 18:33:08.617: ------------ done ----------------
18.11.2018 18:33:08.617: Step 5 of 5
18.11.2018 18:33:08.617: ------------ BurnToDisc ----------------
18.11.2018 18:33:08.617: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: off
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
18.11.2018 18:33:08.617: Booktype: don't care
18.11.2018 18:33:08.617: setting write speed to 5540000 bytes/sec
18.11.2018 18:33:08.617: this equals 4,000000x DVD / 31,405895x CD Speed
18.11.2018 18:33:08.617: mounting volume on device...OK
18.11.2018 18:33:08.617: Check on previously direct recorded session...OK
18.11.2018 18:33:08.617: -- Volume mounted --
18.11.2018 18:33:08.617: -- Recording on "E: HL-DT-ST DVDRAM GUE1N" --
18.11.2018 18:33:08.617: -- Medium is "DVD+R" --
18.11.2018 18:33:08.617: -- Manufacturer "MBIPG101" --
18.11.2018 18:33:08.664: AVSDK Message - INFO: :Recording volume ...
18.11.2018 18:33:08.664: AVSDK Status - Begin operation Recording 576480 sectors/frames
18.11.2018 18:33:08.664: AVSDK Message - INFO: :Recording -> writing data ...
18.11.2018 18:33:14.868: wrote LeadIn, start DataCopy
18.11.2018 18:37:06.883: writing leadout and closing disc
18.11.2018 20:07:11.918: AVSDK Message - ERROR: :Cannot write or close track -> Drive not ready (SK/ASC/ASCQ 02/04/08)
18.11.2018 20:07:13.886: AVSDK Status - End operation Recording 576480 sectors/frames
18.11.2018 20:07:13.886: AVSDK Message - INFO: :Recording failed, refer to previous error messages for more information
18.11.2018 20:07:13.886: !!! AVSDK error: BurnToDisc() calling AvVolWriteToDisc(): 101 - drive not ready !!!
18.11.2018 20:07:13.886: !!! DBK error in CBurnDevSupportPoint::BurnToDisc(): 211 - drive not ready !!!
18.11.2018 20:07:13.886: ------------ done ----------------
18.11.2018 20:07:13.886: Step 5 done
18.11.2018 20:07:13.902: project burning failed
18.11.2018 20:07:13.902: !!! DBK error in CBurnDevSupport::BurnProject(): 211 - drive not ready !!!
18.11.2018 20:07:13.902: !!! DBK error in BurnProject: 211 - drive not ready !!!
Kann uns jemand helfen?