- beim brennen
-habe eine DVD geändert und wollte erneut brennen und er gibt mir folgende Meldung
Endcodierung fehlgeschlagen, hatte habe schon alle Videos endcodiert!
Es wurde in diesem Forum schon sehr häufig bei diesen Problemen darauf hingewiesen, dass um eine Antwort geben zu können, die Datei dbk.log benötigt wird. In diese Datei werden u.a. auch Fehler die beim Brennen/encodieren auftreten protokolliert. Diese Datei ist unter WIN XP typischerweise hier zu finden:
C:/Dokumente und Einstellungen/All Users/Anwendungsdaten/MAGIX/Foto.../Userdata/...
Kopiere den entsprechenden Teil (auf Datum/Uhrzeit achten) in Deine Frage.
Die dbk.log ist einen versteckte Datei, beim Suchen darauf achten.
Gruß
Danke meinst Du diesen Teil
-------------------------- 05.06.2011 13:32:46 --------------------------
05.06.2011 13:32:46.049: DLLAV32.DLL loaded, all entry points available
05.06.2011 13:32:46.051: AVSDK MsgCbFunc registered
05.06.2011 13:32:46.053: AVSDK: StatCbFunc registered
05.06.2011 13:32:46.085: AVSDK Version 8.1.186
05.06.2011 13:32:46.087: ------------ Reading Device Info ----------------
05.06.2011 13:32:46.088: AVSDK: 1 device(s) found
05.06.2011 13:32:46.090: Adapter=0 ID=0 LUN=32 F:HL-DT-ST DVDRAM GH22NS50 Revision:TN00
05.06.2011 13:32:46.091: AVSDK: 1 record device(s) available
05.06.2011 13:32:46.093: ------------ done ----------------
-------------------------- 28.06.2011 12:46:35 --------------------------
28.06.2011 12:46:35.572: DLLAV32.DLL loaded, all entry points available
28.06.2011 12:46:35.572: AVSDK MsgCbFunc registered
28.06.2011 12:46:35.572: AVSDK: StatCbFunc registered
28.06.2011 12:46:35.587: AVSDK Version 8.1.186
28.06.2011 12:46:35.587: ------------ Reading Device Info ----------------
28.06.2011 12:46:35.587: AVSDK: 1 device(s) found
28.06.2011 12:46:35.587: Adapter=0 ID=0 LUN=48 D:HL-DT-ST DVDRAM GH22NS50 Revision:TN03
28.06.2011 12:46:35.603: AVSDK: 1 record device(s) available
28.06.2011 12:46:35.603: ------------ done ----------------
28.06.2011 12:46:35.681: setting no speed limit
28.06.2011 12:46:35.681: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
28.06.2011 12:46:38.723: AVSDK Message - ERROR: :Cannot get device/media specific information -> functionality is not provided by device or by system
28.06.2011 12:46:38.723: !!! AVSDK error: ReadRecorderDiscInfo() calling AvVolMountDev(): 209 - illegal type of disc !!!
28.06.2011 12:47:18.004: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
28.06.2011 12:47:18.004: DEVICE REMOVAL
28.06.2011 12:47:42.012: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
28.06.2011 12:47:42.012: DEVICE ARRIVED
28.06.2011 13:10:06.329: Open Project: Elin -- dvd project 2011-06-28
28.06.2011 13:10:06.329: VideoMode: NTSC Temp Dir: C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\
28.06.2011 13:10:06.329: dll version 4.3.6.2
28.06.2011 13:10:06.345: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
28.06.2011 13:10:06.345: EstimateLayerSplitPoint()...
28.06.2011 13:10:06.345: Splitpunkt 4271833088 auf Disk mit Größe 187760640
28.06.2011 13:10:06.345: Title an Stelle 0, Länge 131072, Typ 0
28.06.2011 13:10:06.345: Title an Stelle 131072, Länge 229376, Typ 0
28.06.2011 13:10:06.345: Title an Stelle 360448, Länge 187400192, Typ 1
28.06.2011 13:10:06.345: ... Split möglich nach aktuellem Title, -> Abbruch
28.06.2011 13:10:06.360: Step 1 of 6, Encodiere Film 1 ...
28.06.2011 13:11:22.332: Step 1 done
28.06.2011 13:11:22.332: Step 2 of 6, Encodiere Filmmenü ...
28.06.2011 13:11:22.816: Step 2 done
28.06.2011 13:11:22.816: Step 3 of 6, Encodiere Kapitelmenü 1 ...
28.06.2011 13:11:33.221: Step 3 done
28.06.2011 13:11:33.221: ConvertMovie() - encoded file: C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\DVD Image Elin\VTS_01_1.VOB
28.06.2011 13:11:33.237: Step 4 of 6, Erzeuge Disc-Image ...
28.06.2011 13:11:35.047: Step 4 done
28.06.2011 13:11:37.309: Step 5 of 6
28.06.2011 13:11:37.309: Step 5 done
28.06.2011 13:11:37.324: ------------ InitializeBurningProcess Point ----------------
28.06.2011 13:11:37.387: setting PoINT cache size to 16777216l
28.06.2011 13:11:37.387: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
28.06.2011 13:11:37.387: Booktype: don't care
28.06.2011 13:11:37.402: setting write speed to 5540000 bytes/sec
28.06.2011 13:11:37.402: this equals 4,000000x DVD / 31,405897x CD Speed
28.06.2011 13:11:37.402: ------------ done: succeeded ----------------
28.06.2011 13:11:37.402: ------------ CreateAPIProject ----------------
28.06.2011 13:11:37.402: Step 6 of 6
28.06.2011 13:11:37.402: creating DVD project in prepfile mode...
28.06.2011 13:11:37.418: create volume... OK
28.06.2011 13:11:37.418: verify option OFF
28.06.2011 13:11:37.418: adding file "C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\DVD Image Elin\VIDEO_TS.IFO"
28.06.2011 13:11:37.418: adding file "C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\DVD Image Elin\VIDEO_TS.VOB"
28.06.2011 13:11:37.418: adding file "C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\DVD Image Elin\VTS_01_1.VOB"
28.06.2011 13:11:37.433: adding file "C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\DVD Image Elin\VTS_01_0.IFO"
28.06.2011 13:11:37.433: adding file "C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\DVD Image Elin\VTS_01_0.VOB"
28.06.2011 13:11:37.433: Step 6 done
28.06.2011 13:11:37.433: ------------ done ----------------
28.06.2011 13:11:37.433: ------------ BurnToDisc ----------------
28.06.2011 13:11:37.449: time:
28.06.2011 13:11:37.449: Step 6 of 6
28.06.2011 13:11:37.449: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
28.06.2011 13:11:37.449: Booktype: don't care
28.06.2011 13:11:37.449: setting write speed to 5540000 bytes/sec
28.06.2011 13:11:37.449: this equals 4,000000x DVD / 31,405897x CD Speed
28.06.2011 13:11:37.465: Check on previously direct recorded session...OK
28.06.2011 13:11:37.465: -- Volume mounted --
28.06.2011 13:11:37.465: -- Recording on "D: HL-DT-ST DVDRAM GH22NS50" --
28.06.2011 13:11:37.465: -- Medium is "DVD-R" --
28.06.2011 13:11:37.465: -- Manufacturer "SONY16D1" --
28.06.2011 13:11:37.496: AVSDK Message - INFO: :Recording volume ...
28.06.2011 13:11:37.496: AVSDK Status - Begin operation Recording 74608 sectors/frames
28.06.2011 13:11:37.496: time:
28.06.2011 13:11:37.511: AVSDK Message - INFO: :Recording -> writing data ...
28.06.2011 13:11:38.728: wrote LeadIn, start DataCopy
28.06.2011 13:11:38.728: time:
28.06.2011 13:12:28.477: writing leadout and closing disc
28.06.2011 13:12:28.477: time:
28.06.2011 13:15:22.932: writing leadout and closing disc
28.06.2011 13:15:22.932: time:
28.06.2011 13:15:22.932: AVSDK Status - End operation Recording 74608 sectors/frames
28.06.2011 13:15:22.932: AVSDK Message - INFO: :Recording successfully completed
28.06.2011 13:15:25.287: Step 6 done
28.06.2011 13:15:25.303: ------------ done ----------------
28.06.2011 13:15:25.303: time:
-------------------------- 29.01.2012 13:33:47 --------------------------
29.01.2012 13:33:47.992: DLLAV32.DLL loaded, all entry points available
29.01.2012 13:33:48.007: AVSDK MsgCbFunc registered
29.01.2012 13:33:48.007: AVSDK: StatCbFunc registered
29.01.2012 13:33:48.085: AVSDK Version 8.1.186
29.01.2012 13:33:48.085: ------------ Reading Device Info ----------------
29.01.2012 13:33:48.085: AVSDK: 1 device(s) found
29.01.2012 13:33:48.085: Adapter=0 ID=0 LUN=48 D:HL-DT-ST DVDRAM GH22NS50 Revision:TN03
29.01.2012 13:33:48.085: AVSDK: 1 record device(s) available
29.01.2012 13:33:48.085: ------------ done ----------------
29.01.2012 13:33:48.194: setting no speed limit
29.01.2012 13:33:48.194: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
29.01.2012 13:33:48.272: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
29.01.2012 13:33:48.272: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
29.01.2012 13:33:48.272: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
29.01.2012 13:34:45.478: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
29.01.2012 13:34:45.478: DEVICE ARRIVED
29.01.2012 13:36:08.404: setting no speed limit
29.01.2012 13:36:22.631: Open Project: Anne_Abschied_1 -- dvd project 2012-01-29
29.01.2012 13:36:22.647: VideoMode: NTSC Temp Dir: C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\
29.01.2012 13:36:22.647: dll version 4.4.9.6
29.01.2012 13:36:22.647: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
29.01.2012 13:36:22.647: EstimateLayerSplitPoint()...
29.01.2012 13:36:22.647: Splitpunkt 4271833088 auf Disk mit Größe 2800156672
29.01.2012 13:36:22.662: Title an Stelle 0, Länge 131072, Typ 0
29.01.2012 13:36:22.662: Title an Stelle 131072, Länge 327680, Typ 0
29.01.2012 13:36:22.662: Title an Stelle 458752, Länge 2799697920, Typ 1
29.01.2012 13:36:22.662: ... Split möglich nach aktuellem Title, -> Abbruch
29.01.2012 13:36:22.662: Step 1 of 6, Encodiere Film 1 ...
29.01.2012 13:58:59.521: Step 1 done
29.01.2012 13:58:59.537: Step 2 of 6, Encodiere Filmmenü ...
29.01.2012 13:59:35.043: Step 2 done
29.01.2012 13:59:35.058: Step 3 of 6, Encodiere Kapitelmenü 1 ...
29.01.2012 13:59:39.161: Step 3 done
29.01.2012 13:59:39.177: ConvertMovie() - encoded file: C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\DVD Image Anne_Abschied_1\VTS_01_1.VOB
29.01.2012 13:59:39.177: ConvertMovie() - encoded file: C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\DVD Image Anne_Abschied_1\VTS_01_2.VOB
29.01.2012 13:59:39.192: Step 4 of 6, Disc Image wird erzeugt...
29.01.2012 14:00:26.959: Step 4 done
29.01.2012 14:00:31.764: Step 5 of 6
29.01.2012 14:00:31.764: Step 5 done
29.01.2012 14:00:31.780: ------------ InitializeBurningProcess Point ----------------
29.01.2012 14:00:31.842: setting PoINT cache size to 16777216l
29.01.2012 14:00:32.560: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
29.01.2012 14:00:32.560: Booktype: don't care
29.01.2012 14:00:32.560: setting write speed to 5540000 bytes/sec
29.01.2012 14:00:32.575: this equals 4,000000x DVD / 31,405897x CD Speed
29.01.2012 14:00:32.575: ------------ done: succeeded ----------------
29.01.2012 14:00:32.575: ------------ CreateAPIProject ----------------
29.01.2012 14:00:32.575: Step 6 of 6
29.01.2012 14:00:32.575: creating DVD project in prepfile mode...
29.01.2012 14:00:32.591: create volume... OK
29.01.2012 14:00:32.591: verify option OFF
29.01.2012 14:00:32.591: adding file "C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\DVD Image Anne_Abschied_1\VIDEO_TS.IFO"
29.01.2012 14:00:32.856: adding file "C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\DVD Image Anne_Abschied_1\VIDEO_TS.VOB"
29.01.2012 14:00:32.856: adding file "C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\DVD Image Anne_Abschied_1\VTS_01_1.VOB"
29.01.2012 14:00:32.856: adding file "C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\DVD Image Anne_Abschied_1\VTS_01_2.VOB"
29.01.2012 14:00:32.856: adding file "C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\DVD Image Anne_Abschied_1\VTS_01_0.IFO"
29.01.2012 14:00:32.872: adding file "C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\DVD Image Anne_Abschied_1\VTS_01_0.VOB"
29.01.2012 14:00:32.872: Step 6 done
29.01.2012 14:00:32.872: ------------ done ----------------
29.01.2012 14:00:32.872: ------------ BurnToDisc ----------------
29.01.2012 14:00:32.887: Step 6 of 6
29.01.2012 14:00:32.887: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
29.01.2012 14:00:32.887: Booktype: don't care
29.01.2012 14:00:32.887: setting write speed to 5540000 bytes/sec
29.01.2012 14:00:32.887: this equals 4,000000x DVD / 31,405897x CD Speed
29.01.2012 14:00:32.903: Check on previously direct recorded session...OK
29.01.2012 14:00:32.903: -- Volume mounted --
29.01.2012 14:00:32.903: -- Recording on "D: HL-DT-ST DVDRAM GH22NS50" --
29.01.2012 14:00:32.903: -- Medium is "DVD-R" --
29.01.2012 14:00:32.903: -- Manufacturer "SONY16D1" --
29.01.2012 14:00:32.934: AVSDK Message - INFO: :Recording volume ...
29.01.2012 14:00:32.950: AVSDK Status - Begin operation Recording 1040288 sectors/frames
29.01.2012 14:00:32.950: AVSDK Message - INFO: :Recording -> writing data ...
29.01.2012 14:00:34.182: wrote LeadIn, start DataCopy
29.01.2012 14:07:20.937: writing leadout and closing disc
29.01.2012 14:07:52.434: writing leadout and closing disc
29.01.2012 14:07:52.434: AVSDK Status - End operation Recording 1040288 sectors/frames
29.01.2012 14:07:52.434: AVSDK Message - INFO: :Recording successfully completed
29.01.2012 14:07:54.945: Step 6 done
29.01.2012 14:07:54.945: ------------ done ----------------
-------------------------- 29.01.2012 16:56:28 --------------------------
29.01.2012 16:56:28.637: DLLAV32.DLL loaded, all entry points available
29.01.2012 16:56:28.652: AVSDK MsgCbFunc registered
29.01.2012 16:56:28.652: AVSDK: StatCbFunc registered
29.01.2012 16:56:28.730: AVSDK Version 8.1.186
29.01.2012 16:56:28.730: ------------ Reading Device Info ----------------
29.01.2012 16:56:28.730: AVSDK: 1 device(s) found
29.01.2012 16:56:28.730: Adapter=0 ID=0 LUN=48 D:HL-DT-ST DVDRAM GH22NS50 Revision:TN03
29.01.2012 16:56:28.730: AVSDK: 1 record device(s) available
29.01.2012 16:56:28.730: ------------ done ----------------
29.01.2012 16:56:28.871: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
29.01.2012 16:56:28.871: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
29.01.2012 16:56:28.887: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
29.01.2012 16:58:13.344: setting no speed limit
29.01.2012 16:58:13.360: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
29.01.2012 16:58:13.438: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
29.01.2012 16:58:13.438: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
29.01.2012 16:58:13.438: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
29.01.2012 16:59:05.480: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
29.01.2012 16:59:05.480: DEVICE ARRIVED
29.01.2012 16:59:05.480: AVSDK Message - ERROR: :Cannot open drive -> error code 14
29.01.2012 16:59:05.495: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 3 - bad address given as parameter !!!
29.01.2012 16:59:05.495: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 202 - bad address given as parameter !!!
29.01.2012 16:59:07.913: Open Project: Anne_Abschied_1 -- dvd project 2012-01-29
29.01.2012 16:59:07.913: VideoMode: NTSC Temp Dir: C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\
29.01.2012 16:59:07.913: dll version 4.4.9.6
29.01.2012 16:59:07.913: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
29.01.2012 16:59:07.929: EstimateLayerSplitPoint()...
29.01.2012 16:59:07.929: Splitpunkt 4271833088 auf Disk mit Größe 131072
29.01.2012 16:59:07.929: Title an Stelle 0, Länge 131072, Typ 0
29.01.2012 16:59:07.929: ... Split möglich nach aktuellem Title, -> Abbruch
29.01.2012 16:59:07.944: Step 1 of 6, Encodiere Film 1 ...
29.01.2012 16:59:07.944: Step 1 done
29.01.2012 16:59:07.944: Step 2 of 6, Encodiere Filmmenü ...
29.01.2012 17:00:00.454: Step 2 done
29.01.2012 17:00:00.454: Step 3 of 6, Disc Image wird erzeugt...
29.01.2012 17:00:00.454:
MDA reports error 0x840003f4 - no titlesets defined
29.01.2012 17:00:07.745: Step 3 done
29.01.2012 17:00:07.761: ERROR: PrepareDVDVideoFiles() failed with errNo 5 - encoding failed
29.01.2012 17:00:07.761: !!! DBK error in BurnProject: 10 - movie encoding failed !!!
-------------------------- 29.01.2012 17:02:46 --------------------------
29.01.2012 17:02:46.598: DLLAV32.DLL loaded, all entry points available
29.01.2012 17:02:46.598: AVSDK MsgCbFunc registered
29.01.2012 17:02:46.614: AVSDK: StatCbFunc registered
29.01.2012 17:02:46.676: AVSDK Version 8.1.186
29.01.2012 17:02:46.676: ------------ Reading Device Info ----------------
29.01.2012 17:02:46.676: AVSDK: 1 device(s) found
29.01.2012 17:02:46.676: Adapter=0 ID=0 LUN=48 D:HL-DT-ST DVDRAM GH22NS50 Revision:TN03
29.01.2012 17:02:46.676: AVSDK: 1 record device(s) available
29.01.2012 17:02:46.692: ------------ done ----------------
29.01.2012 17:02:46.770: setting no speed limit
29.01.2012 17:02:46.770: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
29.01.2012 17:02:57.659: Open Project: Anne_Abschied_1 -- dvd project 2012-01-29
29.01.2012 17:02:57.674: VideoMode: NTSC Temp Dir: C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\
29.01.2012 17:02:57.674: dll version 4.4.9.6
29.01.2012 17:02:57.674: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
29.01.2012 17:02:57.674: EstimateLayerSplitPoint()...
29.01.2012 17:02:57.674: Splitpunkt 4271833088 auf Disk mit Größe 131072
29.01.2012 17:02:57.674: Title an Stelle 0, Länge 131072, Typ 0
29.01.2012 17:02:57.690: ... Split möglich nach aktuellem Title, -> Abbruch
29.01.2012 17:02:57.690: Step 1 of 6, Encodiere Film 1 ...
29.01.2012 17:02:57.690: Step 1 done
29.01.2012 17:02:57.706: Step 2 of 6, Encodiere Filmmenü ...
29.01.2012 17:03:50.246: Step 2 done
29.01.2012 17:03:50.246: Step 3 of 6, Disc Image wird erzeugt...
29.01.2012 17:03:50.246:
MDA reports error 0x840003f4 - no titlesets defined
29.01.2012 17:04:10.548: Step 3 done
29.01.2012 17:04:10.548: ERROR: PrepareDVDVideoFiles() failed with errNo 5 - encoding failed
29.01.2012 17:04:10.548: !!! DBK error in BurnProject: 10 - movie encoding failed !!!
Schau mal unter diesem Link nach, evt. hilft es Dir weiter:
https://support2.magix.com/customer/de/node/65429
Zum Lesen mußt Du angemeldet sein, wie für das Forum. Hättest Du die Suche mit Deiner Fehlernummer bemüht, wärst Du auch auf diese Info gestoßen.
Die Teile der dbk.log von 2011 hättest Du übrigens nicht auch kopieren brauchen, bläht den Post nur unnötig auf
Gruß
Vielen Dank für die Mühe, aber ich wollte schon juchuuu schreien, habe es probiert und es kommt die gleiche Fehlermeldung. Hast Du noch einen Rat für mich.
29.01.2012 13:33:47.992: DLLAV32.DLL loaded, all entry points available
29.01.2012 13:33:48.007: AVSDK MsgCbFunc registered
29.01.2012 13:33:48.007: AVSDK: StatCbFunc registered
29.01.2012 13:33:48.085: AVSDK Version 8.1.186
29.01.2012 13:33:48.085: ------------ Reading Device Info ----------------
29.01.2012 13:33:48.085: AVSDK: 1 device(s) found
29.01.2012 13:33:48.085: Adapter=0 ID=0 LUN=48 D:HL-DT-ST DVDRAM GH22NS50 Revision:TN03
29.01.2012 13:33:48.085: AVSDK: 1 record device(s) available
29.01.2012 13:33:48.085: ------------ done ----------------
29.01.2012 13:33:48.194: setting no speed limit
29.01.2012 13:33:48.194: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
29.01.2012 13:33:48.272: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
29.01.2012 13:33:48.272: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
29.01.2012 13:33:48.272: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
29.01.2012 13:34:45.478: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
29.01.2012 13:34:45.478: DEVICE ARRIVED
29.01.2012 13:36:08.404: setting no speed limit
29.01.2012 13:36:22.631: Open Project: Anne_Abschied_1 -- dvd project 2012-01-29
29.01.2012 13:36:22.647: VideoMode: NTSC Temp Dir: C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\
29.01.2012 13:36:22.647: dll version 4.4.9.6
29.01.2012 13:36:22.647: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
29.01.2012 13:36:22.647: EstimateLayerSplitPoint()...
29.01.2012 13:36:22.647: Splitpunkt 4271833088 auf Disk mit Größe 2800156672
29.01.2012 13:36:22.662: Title an Stelle 0, Länge 131072, Typ 0
29.01.2012 13:36:22.662: Title an Stelle 131072, Länge 327680, Typ 0
29.01.2012 13:36:22.662: Title an Stelle 458752, Länge 2799697920, Typ 1
29.01.2012 13:36:22.662: ... Split möglich nach aktuellem Title, -> Abbruch
29.01.2012 13:36:22.662: Step 1 of 6, Encodiere Film 1 ...
29.01.2012 13:58:59.521: Step 1 done
29.01.2012 13:58:59.537: Step 2 of 6, Encodiere Filmmenü ...
29.01.2012 13:59:35.043: Step 2 done
29.01.2012 13:59:35.058: Step 3 of 6, Encodiere Kapitelmenü 1 ...
29.01.2012 13:59:39.161: Step 3 done
29.01.2012 13:59:39.177: ConvertMovie() - encoded file: C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\DVD Image Anne_Abschied_1\VTS_01_1.VOB
29.01.2012 13:59:39.177: ConvertMovie() - encoded file: C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\DVD Image Anne_Abschied_1\VTS_01_2.VOB
29.01.2012 13:59:39.192: Step 4 of 6, Disc Image wird erzeugt...
29.01.2012 14:00:26.959: Step 4 done
29.01.2012 14:00:31.764: Step 5 of 6
29.01.2012 14:00:31.764: Step 5 done
29.01.2012 14:00:31.780: ------------ InitializeBurningProcess Point ----------------
29.01.2012 14:00:31.842: setting PoINT cache size to 16777216l
29.01.2012 14:00:32.560: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
29.01.2012 14:00:32.560: Booktype: don't care
29.01.2012 14:00:32.560: setting write speed to 5540000 bytes/sec
29.01.2012 14:00:32.575: this equals 4,000000x DVD / 31,405897x CD Speed
29.01.2012 14:00:32.575: ------------ done: succeeded ----------------
29.01.2012 14:00:32.575: ------------ CreateAPIProject ----------------
29.01.2012 14:00:32.575: Step 6 of 6
29.01.2012 14:00:32.575: creating DVD project in prepfile mode...
29.01.2012 14:00:32.591: create volume... OK
29.01.2012 14:00:32.591: verify option OFF
29.01.2012 14:00:32.591: adding file "C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\DVD Image Anne_Abschied_1\VIDEO_TS.IFO"
29.01.2012 14:00:32.856: adding file "C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\DVD Image Anne_Abschied_1\VIDEO_TS.VOB"
29.01.2012 14:00:32.856: adding file "C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\DVD Image Anne_Abschied_1\VTS_01_1.VOB"
29.01.2012 14:00:32.856: adding file "C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\DVD Image Anne_Abschied_1\VTS_01_2.VOB"
29.01.2012 14:00:32.856: adding file "C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\DVD Image Anne_Abschied_1\VTS_01_0.IFO"
29.01.2012 14:00:32.872: adding file "C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\DVD Image Anne_Abschied_1\VTS_01_0.VOB"
29.01.2012 14:00:32.872: Step 6 done
29.01.2012 14:00:32.872: ------------ done ----------------
29.01.2012 14:00:32.872: ------------ BurnToDisc ----------------
29.01.2012 14:00:32.887: Step 6 of 6
29.01.2012 14:00:32.887: Used burn options:
simulation: off
DiscAtOnce: off
BurnOver: off
BurnProof: on
FormatDisc: off
ShortLeadOut: off
NoDefectMgmt: off
29.01.2012 14:00:32.887: Booktype: don't care
29.01.2012 14:00:32.887: setting write speed to 5540000 bytes/sec
29.01.2012 14:00:32.887: this equals 4,000000x DVD / 31,405897x CD Speed
29.01.2012 14:00:32.903: Check on previously direct recorded session...OK
29.01.2012 14:00:32.903: -- Volume mounted --
29.01.2012 14:00:32.903: -- Recording on "D: HL-DT-ST DVDRAM GH22NS50" --
29.01.2012 14:00:32.903: -- Medium is "DVD-R" --
29.01.2012 14:00:32.903: -- Manufacturer "SONY16D1" --
29.01.2012 14:00:32.934: AVSDK Message - INFO: :Recording volume ...
29.01.2012 14:00:32.950: AVSDK Status - Begin operation Recording 1040288 sectors/frames
29.01.2012 14:00:32.950: AVSDK Message - INFO: :Recording -> writing data ...
29.01.2012 14:00:34.182: wrote LeadIn, start DataCopy
29.01.2012 14:07:20.937: writing leadout and closing disc
29.01.2012 14:07:52.434: writing leadout and closing disc
29.01.2012 14:07:52.434: AVSDK Status - End operation Recording 1040288 sectors/frames
29.01.2012 14:07:52.434: AVSDK Message - INFO: :Recording successfully completed
29.01.2012 14:07:54.945: Step 6 done
29.01.2012 14:07:54.945: ------------ done ----------------
-------------------------- 29.01.2012 16:56:28 --------------------------
29.01.2012 16:56:28.637: DLLAV32.DLL loaded, all entry points available
29.01.2012 16:56:28.652: AVSDK MsgCbFunc registered
29.01.2012 16:56:28.652: AVSDK: StatCbFunc registered
29.01.2012 16:56:28.730: AVSDK Version 8.1.186
29.01.2012 16:56:28.730: ------------ Reading Device Info ----------------
29.01.2012 16:56:28.730: AVSDK: 1 device(s) found
29.01.2012 16:56:28.730: Adapter=0 ID=0 LUN=48 D:HL-DT-ST DVDRAM GH22NS50 Revision:TN03
29.01.2012 16:56:28.730: AVSDK: 1 record device(s) available
29.01.2012 16:56:28.730: ------------ done ----------------
29.01.2012 16:56:28.871: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
29.01.2012 16:56:28.871: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
29.01.2012 16:56:28.887: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
29.01.2012 16:58:13.344: setting no speed limit
29.01.2012 16:58:13.360: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
29.01.2012 16:58:13.438: AVSDK Message - ERROR: :Cannot open drive -> Medium not present (SK/ASC/ASCQ 02/3A/01)
29.01.2012 16:58:13.438: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 102 - no disc in drive !!!
29.01.2012 16:58:13.438: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 20 - no disc !!!
29.01.2012 16:59:05.480: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
29.01.2012 16:59:05.480: DEVICE ARRIVED
29.01.2012 16:59:05.480: AVSDK Message - ERROR: :Cannot open drive -> error code 14
29.01.2012 16:59:05.495: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 3 - bad address given as parameter !!!
29.01.2012 16:59:05.495: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 202 - bad address given as parameter !!!
29.01.2012 16:59:07.913: Open Project: Anne_Abschied_1 -- dvd project 2012-01-29
29.01.2012 16:59:07.913: VideoMode: NTSC Temp Dir: C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\
29.01.2012 16:59:07.913: dll version 4.4.9.6
29.01.2012 16:59:07.913: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
29.01.2012 16:59:07.929: EstimateLayerSplitPoint()...
29.01.2012 16:59:07.929: Splitpunkt 4271833088 auf Disk mit Größe 131072
29.01.2012 16:59:07.929: Title an Stelle 0, Länge 131072, Typ 0
29.01.2012 16:59:07.929: ... Split möglich nach aktuellem Title, -> Abbruch
29.01.2012 16:59:07.944: Step 1 of 6, Encodiere Film 1 ...
29.01.2012 16:59:07.944: Step 1 done
29.01.2012 16:59:07.944: Step 2 of 6, Encodiere Filmmenü ...
29.01.2012 17:00:00.454: Step 2 done
29.01.2012 17:00:00.454: Step 3 of 6, Disc Image wird erzeugt...
29.01.2012 17:00:00.454:
MDA reports error 0x840003f4 - no titlesets defined
29.01.2012 17:00:07.745: Step 3 done
29.01.2012 17:00:07.761: ERROR: PrepareDVDVideoFiles() failed with errNo 5 - encoding failed
29.01.2012 17:00:07.761: !!! DBK error in BurnProject: 10 - movie encoding failed !!!
-------------------------- 29.01.2012 17:02:46 --------------------------
29.01.2012 17:02:46.598: DLLAV32.DLL loaded, all entry points available
29.01.2012 17:02:46.598: AVSDK MsgCbFunc registered
29.01.2012 17:02:46.614: AVSDK: StatCbFunc registered
29.01.2012 17:02:46.676: AVSDK Version 8.1.186
29.01.2012 17:02:46.676: ------------ Reading Device Info ----------------
29.01.2012 17:02:46.676: AVSDK: 1 device(s) found
29.01.2012 17:02:46.676: Adapter=0 ID=0 LUN=48 D:HL-DT-ST DVDRAM GH22NS50 Revision:TN03
29.01.2012 17:02:46.676: AVSDK: 1 record device(s) available
29.01.2012 17:02:46.692: ------------ done ----------------
29.01.2012 17:02:46.770: setting no speed limit
29.01.2012 17:02:46.770: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
29.01.2012 17:02:57.659: Open Project: Anne_Abschied_1 -- dvd project 2012-01-29
29.01.2012 17:02:57.674: VideoMode: NTSC Temp Dir: C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\
29.01.2012 17:02:57.674: dll version 4.4.9.6
29.01.2012 17:02:57.674: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
29.01.2012 17:02:57.674: EstimateLayerSplitPoint()...
29.01.2012 17:02:57.674: Splitpunkt 4271833088 auf Disk mit Größe 131072
29.01.2012 17:02:57.674: Title an Stelle 0, Länge 131072, Typ 0
29.01.2012 17:02:57.690: ... Split möglich nach aktuellem Title, -> Abbruch
29.01.2012 17:02:57.690: Step 1 of 6, Encodiere Film 1 ...
29.01.2012 17:02:57.690: Step 1 done
29.01.2012 17:02:57.706: Step 2 of 6, Encodiere Filmmenü ...
29.01.2012 17:03:50.246: Step 2 done
29.01.2012 17:03:50.246: Step 3 of 6, Disc Image wird erzeugt...
29.01.2012 17:03:50.246:
MDA reports error 0x840003f4 - no titlesets defined
29.01.2012 17:04:10.548: Step 3 done
29.01.2012 17:04:10.548: ERROR: PrepareDVDVideoFiles() failed with errNo 5 - encoding failed
29.01.2012 17:04:10.548: !!! DBK error in BurnProject: 10 - movie encoding failed !!!
Du solltest den letzten Brennversuch (auf Datum Uhrzeit achten) aus der dbk.log hier einstellen. Evt. ist da noch was zu sehen.
Hallo hmiquel, habe den Bericht kopiert und wünsche mir so sehr, dass Du etwas endecken kannst. Wollte den Film schon längst verschenkt haben. Aber ich liebe Magix und ich hasse Magix. Vielleicht kann ich die Liebe neu endecken zu Magix?????
08.02.2012 19:12:37.766: DLLAV32.DLL loaded, all entry points available
08.02.2012 19:12:37.766: AVSDK MsgCbFunc registered
08.02.2012 19:12:37.766: AVSDK: StatCbFunc registered
08.02.2012 19:12:37.829: AVSDK Version 8.1.186
08.02.2012 19:12:37.844: ------------ Reading Device Info ----------------
08.02.2012 19:12:37.844: AVSDK: 1 device(s) found
08.02.2012 19:12:37.844: Adapter=0 ID=0 LUN=48 D:HL-DT-ST DVDRAM GH22NS50 Revision:TN03
08.02.2012 19:12:37.844: AVSDK: 1 record device(s) available
08.02.2012 19:12:37.860: ------------ done ----------------
08.02.2012 19:12:37.938: setting no speed limit
08.02.2012 19:12:37.938: !!! DBK error in CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device !!!
08.02.2012 19:12:51.307: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
08.02.2012 19:12:51.307: DEVICE REMOVAL
08.02.2012 19:13:09.575: WM_DEVICECHANGE( VOLUMECHANGE ) for drive d:
08.02.2012 19:13:09.590: DEVICE ARRIVED
08.02.2012 19:13:09.590: AVSDK Message - ERROR: :Cannot open drive -> error code 14
08.02.2012 19:13:09.590: !!! AVSDK error: ReadRecorderDiscInfo() calling AvDevOpen(): 3 - bad address given as parameter !!!
08.02.2012 19:13:09.606: !!! DBK error in CBurnDevSupportPoint::ReadRecorderDiscInfo(): 202 - bad address given as parameter !!!
08.02.2012 19:13:27.624: Open Project: Anne_Abschied_2 -- dvd project 2012-02-08
08.02.2012 19:13:27.640: VideoMode: NTSC Temp Dir: C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\
08.02.2012 19:13:27.640: dll version 4.4.9.6
08.02.2012 19:13:27.640: PrepareDVDVideoFiles() - Abschätzen des Splitpunktes
08.02.2012 19:13:27.640: EstimateLayerSplitPoint()...
08.02.2012 19:13:27.640: Splitpunkt 4271833088 auf Disk mit Größe 0
08.02.2012 19:13:27.640: Split berechnen...
08.02.2012 19:13:27.655: Step 1 of 3, Encodiere Film 1 ...
08.02.2012 19:13:27.655: Step 1 done
08.02.2012 19:13:27.655: Step 2 of 3, Disc Image wird erzeugt...
08.02.2012 19:13:27.671:
MDA reports error 0x840003f4 - no titlesets defined
08.02.2012 19:13:45.685: Step 2 done
08.02.2012 19:13:45.685: ERROR: PrepareDVDVideoFiles() failed with errNo 5 - encoding failed
08.02.2012 19:13:45.685: !!! DBK error in BurnProject: 10 - movie encoding failed !!!
Liebe Grüße
Du solltest mal im Verzeichnis C:\Users\Biene\Documents\MAGIX_Fotos_auf_CD_DVD_9_deluxe_SE\Disc Images\ schauen ob ein Disc Image erstellt wurde. Schau es Dir mal an, ob am Ende ein Problem zu erkennen ist.
Im Forum wurde schon des öfteren empfohlen bei Menueproblemen das Projekt in ein neues zu kopieren, und die Menuegestaltung neu zu beginnen. Dies wäre evt. noch eine Möglichkeit. Die Menueerstellung von Magix ist nun mal nicht das Gelbe vom Ei.
Falls das alles nicht hilft, könntest Du Dein Problem erneut im Forum einstellen. Der Post wäre dann wieder an "erster" Stelle, und würde auch wieder von anderen Mitgliedern gelesen werden.
Gruß