Exportieren ok, aber 'Disc schreiben' ??

Wolve schrieb am 19.02.2020 um 09:07 Uhr

Habe Projekt erfolgreich mit folgender Einstellung exportiert/gebrannt :

--- Blu-ray 1920x1080p24 ("... auf GPU ...: DEaktiv. /hardware encoding: akt.*)

[ * Beim Encodieren kam die Meldung "Mixdown wird durchgeführt - kein Hardw.encoding" ]

ALLE Filme + Menü erfolgreich encodiert ... beim 'Disc schreiben':

--- über 1 Std. keine Bewegung auf dem Fortschrittsbalken => selbst abgebrochen !

Gruß Wolve

Hier die Logeinträge des gesamten BrennVorgangs :

2020/02/18 19:50:10 [INFO]    [UserAction]: Start MAGIX Video deluxe Plus(19.0.2.49)

2020/02/18 19:51:24 [INFO]    [_Common]: RegisterApplicationForRestart()=Result=0

2020/02/18 19:51:44 [INFO]    [UserAction]: Load project JAPAN 2019.MVP

2020/02/18 19:52:48 [INFO]    [UserAction]: Switch main tab to Brenntab

2020/02/18 19:52:48 [ERROR]   [ResortAllPLE]: GetOriginalSample: OriginalSample beyond FileEnd

2020/02/18 19:52:48 [ERROR]   [ResortAllPLE]: GetOriginalSample: OriginalSample beyond FileEnd

2020/02/18 19:53:32 [INFO]    [UserAction]: Switch main tab to Arranger

2020/02/18 19:53:39 [INFO]    [UserAction]: Initiate save project as

2020/02/18 19:54:06 [INFO]    [UserAction]: Save project JAPAN 2019_24p.MVP..

2020/02/18 19:54:10 [INFO]    [UserAction]: ..succeeded

2020/02/18 19:54:27 [INFO]    [UserAction]: Switch main tab to Brenntab

2020/02/18 19:56:59 [INFO]    [UserAction]: Initiate save project

2020/02/18 19:56:59 [INFO]    [UserAction]: Save project JAPAN 2019_24p.MVP..

2020/02/18 19:57:04 [INFO]    [UserAction]: ..succeeded

2020/02/18 19:57:23 [INFO]    [DiscMaker]: BurnSupport: 1 device(s) found

2020/02/18 19:57:23 [WARNING] [DiscMaker]: setting no speed limit

2020/02/18 19:57:23 [WARNING] [DiscMaker]: DBK CBurnDevSupport::InvalidateDiscInfo(): 16 - burn support - invalid device.

2020/02/18 19:58:15 [ERROR]   [DiscMaker]: AVSDK Message - Cannot get device/media specific information -> functionality is not provided by device or by system

2020/02/18 19:58:50 [ERROR]   [DiscMaker]: AVSDK Message - Cannot read sector -> Unrecoverable read error (SK/ASC/ASCQ 03/11/05)

2020/02/18 20:00:38 [ERROR]   [DiscMaker]: AVSDK Message - Cannot perform device control function -> access denied

2020/02/18 20:00:38 [FATAL]   [DiscMaker]: !!! AVSDK OpenCloseTray() calling AvDevControl(): 5 - request not allowed !!!

2020/02/18 20:00:38 [ERROR]   [DiscMaker]: AVSDK Message - Cannot open drive -> error code 14

2020/02/18 20:00:38 [WARNING] [DiscMaker]: AVSDK BeginDiscExplore() calling AvDevOpen(): 3 - bad address given as parameter.

2020/02/18 20:00:38 [FATAL]   [DiscMaker]: !!! DBK CBurnDevSupportPoint::ReadRecorderDiscInfo(): 202 - bad address given as parameter !!!

2020/02/18 20:00:38 [INFO]    [DiscMaker]: Step 1 of 11, Encodiere Film 1 ...

2020/02/18 20:00:38 [ERROR]   [DiscMaker]: ConfigureSplitter: cannot set double layer split point0

2020/02/18 20:00:38 [INFO]    [_Common]: Export with CPU-FX rendering to C:\Users\Wolfgang\Documents\MAGIX\Video deluxe Premium\Disc Images\BD H264 Image JAPAN_2019_24p\BDMV\STREAM\00000.m2ts started (MxMpeg4Intel-Blu-ray\BLURAY_1920x1080p_24FPS.prs|1920x1080p|1.77778|23.976 FPS|22000 kbit/s||2 CHN|48000 Hz|384 kbit/s)

2020/02/18 20:01:13 [ERROR]   [DiscMaker]: AVSDK Message - Cannot get device/media specific information -> functionality is not provided by device or by system

2020/02/18 20:01:48 [ERROR]   [DiscMaker]: AVSDK Message - Cannot read sector -> Unrecoverable read error (SK/ASC/ASCQ 03/11/05)

2020/02/18 20:13:31 [INFO]    [_Common]: Export 779.4s finished successful (Duration=772.8s)

2020/02/18 20:13:31 [INFO]    [DiscMaker]: Step 1 done

2020/02/18 20:13:31 [INFO]    [DiscMaker]: Step 2 of 11, Encodiere Film 2 ...

2020/02/18 20:13:31 [ERROR]   [DiscMaker]: ConfigureSplitter: cannot set double layer split point0

2020/02/18 20:13:31 [INFO]    [_Common]: Export with CPU-FX rendering to C:\Users\Wolfgang\Documents\MAGIX\Video deluxe Premium\Disc Images\BD H264 Image JAPAN_2019_24p\BDMV\STREAM\00001.m2ts started (MxMpeg4Intel-Blu-ray\BLURAY_1920x1080p_24FPS.prs|1920x1080p|1.77778|23.976 FPS|22000 kbit/s||2 CHN|48000 Hz|384 kbit/s)

2020/02/18 20:27:04 [INFO]    [_Common]: Export 822.7s finished successful (Duration=812.5s)

2020/02/18 20:27:04 [INFO]    [DiscMaker]: Step 2 done

2020/02/18 20:27:04 [INFO]    [DiscMaker]: Step 3 of 11, Encodiere Film 3 ...

2020/02/18 20:27:04 [ERROR]   [DiscMaker]: ConfigureSplitter: cannot set double layer split point0

2020/02/18 20:27:04 [INFO]    [_Common]: Export with CPU-FX rendering to C:\Users\Wolfgang\Documents\MAGIX\Video deluxe Premium\Disc Images\BD H264 Image JAPAN_2019_24p\BDMV\STREAM\00002.m2ts started (MxMpeg4Intel-Blu-ray\BLURAY_1920x1080p_24FPS.prs|1920x1080p|1.77778|23.976 FPS|22000 kbit/s||2 CHN|48000 Hz|384 kbit/s)

2020/02/18 20:40:30 [INFO]    [_Common]: Export 737.5s finished successful (Duration=805.9s)

2020/02/18 20:40:30 [INFO]    [DiscMaker]: Step 3 done

2020/02/18 20:40:30 [INFO]    [DiscMaker]: Step 4 of 11, Encodiere Film 4 ...

2020/02/18 20:40:30 [ERROR]   [DiscMaker]: ConfigureSplitter: cannot set double layer split point0

2020/02/18 20:40:30 [INFO]    [_Common]: Export with CPU-FX rendering to C:\Users\Wolfgang\Documents\MAGIX\Video deluxe Premium\Disc Images\BD H264 Image JAPAN_2019_24p\BDMV\STREAM\00003.m2ts started (MxMpeg4Intel-Blu-ray\BLURAY_1920x1080p_24FPS.prs|1920x1080p|1.77778|23.976 FPS|22000 kbit/s||2 CHN|48000 Hz|384 kbit/s)

2020/02/18 20:49:13 [INFO]    [_Common]: Export 469.4s finished successful (Duration=523.5s)

2020/02/18 20:49:13 [INFO]    [DiscMaker]: Step 4 done

2020/02/18 20:49:13 [INFO]    [DiscMaker]: Step 5 of 11, Encodiere Film 5 ...

2020/02/18 20:49:13 [ERROR]   [DiscMaker]: ConfigureSplitter: cannot set double layer split point0

2020/02/18 20:49:13 [INFO]    [_Common]: Export with CPU-FX rendering to C:\Users\Wolfgang\Documents\MAGIX\Video deluxe Premium\Disc Images\BD H264 Image JAPAN_2019_24p\BDMV\STREAM\00004.m2ts started (MxMpeg4Intel-Blu-ray\BLURAY_1920x1080p_24FPS.prs|1920x1080p|1.77778|23.976 FPS|22000 kbit/s||2 CHN|48000 Hz|384 kbit/s)

2020/02/18 21:02:50 [INFO]    [_Common]: Export 695.3s finished successful (Duration=817.0s)

2020/02/18 21:02:50 [INFO]    [DiscMaker]: Step 5 done

2020/02/18 21:02:50 [INFO]    [DiscMaker]: Step 6 of 11, Encodiere Film 6 ...

2020/02/18 21:02:50 [ERROR]   [DiscMaker]: ConfigureSplitter: cannot set double layer split point0

2020/02/18 21:02:50 [INFO]    [_Common]: Export with CPU-FX rendering to C:\Users\Wolfgang\Documents\MAGIX\Video deluxe Premium\Disc Images\BD H264 Image JAPAN_2019_24p\BDMV\STREAM\00005.m2ts started (MxMpeg4Intel-Blu-ray\BLURAY_1920x1080p_24FPS.prs|1920x1080p|1.77778|23.976 FPS|22000 kbit/s||2 CHN|48000 Hz|384 kbit/s)

2020/02/18 21:15:38 [INFO]    [_Common]: Export 604.3s finished successful (Duration=768.0s)

2020/02/18 21:15:38 [INFO]    [DiscMaker]: Step 6 done

2020/02/18 21:15:38 [INFO]    [DiscMaker]: Step 7 of 11, Encodiere Film 7 ...

2020/02/18 21:15:38 [ERROR]   [DiscMaker]: ConfigureSplitter: cannot set double layer split point0

2020/02/18 21:15:38 [INFO]    [_Common]: Export with CPU-FX rendering to C:\Users\Wolfgang\Documents\MAGIX\Video deluxe Premium\Disc Images\BD H264 Image JAPAN_2019_24p\BDMV\STREAM\00006.m2ts started (MxMpeg4Intel-Blu-ray\BLURAY_1920x1080p_24FPS.prs|1920x1080p|1.77778|23.976 FPS|22000 kbit/s||2 CHN|48000 Hz|384 kbit/s)

2020/02/18 21:29:33 [INFO]    [_Common]: Export 692.1s finished successful (Duration=834.2s)

2020/02/18 21:29:33 [INFO]    [DiscMaker]: Step 7 done

2020/02/18 21:29:33 [INFO]    [DiscMaker]: Step 8 of 11, Encodiere Film 8 ...

2020/02/18 21:29:33 [ERROR]   [DiscMaker]: ConfigureSplitter: cannot set double layer split point0

2020/02/18 21:29:33 [INFO]    [_Common]: Export with CPU-FX rendering to C:\Users\Wolfgang\Documents\MAGIX\Video deluxe Premium\Disc Images\BD H264 Image JAPAN_2019_24p\BDMV\STREAM\00007.m2ts started (MxMpeg4Intel-Blu-ray\BLURAY_1920x1080p_24FPS.prs|1920x1080p|1.77778|23.976 FPS|22000 kbit/s||2 CHN|48000 Hz|384 kbit/s)

2020/02/18 21:36:28 [INFO]    [_Common]: Export 422.2s finished successful (Duration=415.5s)

2020/02/18 21:36:28 [INFO]    [DiscMaker]: Step 8 done

2020/02/18 21:36:28 [INFO]    [DiscMaker]: Step 9 of 11, Encodiere Filmmenü ...

2020/02/18 21:36:30 [INFO]    [_Common]: Export with CPU-FX rendering to C:\Users\Wolfgang\Documents\MAGIX\Video deluxe Premium\Disc Images\BD H264 Image JAPAN_2019_24p\BDMV\STREAM\00008.m2ts from 0 to 2809210 started (MxMpeg4Intel-Blu-ray|1920x1080p|1.77778|23.976 FPS|15000 kbit/s||2 CHN|48000 Hz|384 kbit/s)

2020/02/18 21:37:01 [INFO]    [_Common]: Export 58.5s finished successful (Duration=31.5s)

2020/02/18 21:37:01 [INFO]    [DiscMaker]: Step 9 done

2020/02/18 21:37:01 [INFO]    [DiscMaker]: ConvertMovie() - encoded file: C:\Users\Wolfgang\Documents\MAGIX\Video deluxe Premium\Disc Images\BD H264 Image JAPAN_2019_24p\BDMV\STREAM\00000.m2ts

2020/02/18 21:37:01 [INFO]    [DiscMaker]: ConvertMovie() - encoded file: C:\Users\Wolfgang\Documents\MAGIX\Video deluxe Premium\Disc Images\BD H264 Image JAPAN_2019_24p\BDMV\STREAM\00001.m2ts

2020/02/18 21:37:01 [INFO]    [DiscMaker]: ConvertMovie() - encoded file: C:\Users\Wolfgang\Documents\MAGIX\Video deluxe Premium\Disc Images\BD H264 Image JAPAN_2019_24p\BDMV\STREAM\00002.m2ts

2020/02/18 21:37:01 [INFO]    [DiscMaker]: ConvertMovie() - encoded file: C:\Users\Wolfgang\Documents\MAGIX\Video deluxe Premium\Disc Images\BD H264 Image JAPAN_2019_24p\BDMV\STREAM\00003.m2ts

2020/02/18 21:37:01 [INFO]    [DiscMaker]: ConvertMovie() - encoded file: C:\Users\Wolfgang\Documents\MAGIX\Video deluxe Premium\Disc Images\BD H264 Image JAPAN_2019_24p\BDMV\STREAM\00004.m2ts

2020/02/18 21:37:01 [INFO]    [DiscMaker]: ConvertMovie() - encoded file: C:\Users\Wolfgang\Documents\MAGIX\Video deluxe Premium\Disc Images\BD H264 Image JAPAN_2019_24p\BDMV\STREAM\00005.m2ts

2020/02/18 21:37:01 [INFO]    [DiscMaker]: ConvertMovie() - encoded file: C:\Users\Wolfgang\Documents\MAGIX\Video deluxe Premium\Disc Images\BD H264 Image JAPAN_2019_24p\BDMV\STREAM\00006.m2ts

2020/02/18 21:37:01 [INFO]    [DiscMaker]: ConvertMovie() - encoded file: C:\Users\Wolfgang\Documents\MAGIX\Video deluxe Premium\Disc Images\BD H264 Image JAPAN_2019_24p\BDMV\STREAM\00007.m2ts

2020/02/18 21:37:01 [INFO]    [DiscMaker]: Step 10 of 11, Disc Image wird erzeugt...

2020/02/18 21:37:01 [INFO]    [DiscMaker]: Step 10 done

2020/02/18 21:38:05 [ERROR]   [DiscMaker]: AVSDK Message - Cannot get device/media specific information -> functionality is not provided by device or by system

2020/02/18 21:38:41 [ERROR]   [DiscMaker]: AVSDK Message - Cannot read sector -> Unrecoverable read error (SK/ASC/ASCQ 03/11/05)

2020/02/18 21:39:46 [ERROR]   [DiscMaker]: AVSDK Message - Cannot get device/media specific information -> functionality is not provided by device or by system

2020/02/18 21:40:22 [ERROR]   [DiscMaker]: AVSDK Message - Cannot read sector -> Unrecoverable read error (SK/ASC/ASCQ 03/11/05)

2020/02/18 21:40:22 [INFO]    [DiscMaker]: Step 11 of 11

2020/02/18 21:40:22 [INFO]    [DiscMaker]: Step 11 done

2020/02/18 21:41:14 [INFO]    [DiscMaker]: Step 11 of 11

2020/02/18 21:41:14 [INFO]    [DiscMaker]: Step 11 done

2020/02/18 21:41:14 [INFO]    [DiscMaker]: Step 11 of 11

2020/02/18 21:41:50 [ERROR]   [DiscMaker]: AVSDK Message - Cannot read sector -> Unrecoverable read error (SK/ASC/ASCQ 03/11/05)

2020/02/18 21:42:00 [INFO]    [DiscMaker]: AVSDK Message - Recording volume ...

2020/02/18 21:42:00 [INFO]    [DiscMaker]: AVSDK Status - Begin operation Recording 7194336 sectors/frames

2020/02/18 21:42:00 [INFO]    [DiscMaker]: AVSDK Message - Recording -> writing data ...

2020/02/18 21:42:00 [INFO]    [DiscMaker]: wrote LeadIn, start DataCopy

[  22:45  (Info)  Fortschrittsbalken  hat sich nach 1 Std. immer noch nicht bewegt  =>  ABBRUCH  ]

Folgen Danke Zitieren
Mehr

VdL 2023 Premium (22.0.3.172) [VdL Pr.(20.0.1.80)] / VdL 2015 Pr. (14.0.0.187) // Windows 10 Home-64Bit - autom. Update // AMD Ryzen7 3700X (8x3,60 GHz) / 16 GB RAM // Radeon RX5700 (GDDR 6 / 8 GB) aktuelles Update // Blu-Ray Brenner  Pioneer BDR-209 // 500 GB (SSD) + 4 TB (HDD) /// Nikon Z6 + 24-70 mm / 4,0

Kommentare

Wolve schrieb am 19.02.2020 um 10:39 Uhr

weniger geeignet Rohlinge für diesen Brenner

habe mit BD-RE (Verbatim) gearbeitet; bisher ohne Brenn(Schreib-)-Probleme

Bin gerade dabei die BD nochmal zu schreiben; scheint diesmal zu funktionieren, Schreibzeit* ca. 1h30min (FC)

* da BD-RE nur Brenngeschw. 1x !

Zuletzt geändert von Wolve am 19.02.2020, 10:42, insgesamt 1-mal geändert.

VdL 2023 Premium (22.0.3.172) [VdL Pr.(20.0.1.80)] / VdL 2015 Pr. (14.0.0.187) // Windows 10 Home-64Bit - autom. Update // AMD Ryzen7 3700X (8x3,60 GHz) / 16 GB RAM // Radeon RX5700 (GDDR 6 / 8 GB) aktuelles Update // Blu-Ray Brenner  Pioneer BDR-209 // 500 GB (SSD) + 4 TB (HDD) /// Nikon Z6 + 24-70 mm / 4,0

Wolve schrieb am 19.02.2020 um 11:02 Uhr

Brenner ein Problem hat. Was ist das genau für ein Typ/Hersteller? Wie alt?

Details s. Signatur -.- PC (incl. BD-Brenner) -Fertigung: August 2019

VdL 2023 Premium (22.0.3.172) [VdL Pr.(20.0.1.80)] / VdL 2015 Pr. (14.0.0.187) // Windows 10 Home-64Bit - autom. Update // AMD Ryzen7 3700X (8x3,60 GHz) / 16 GB RAM // Radeon RX5700 (GDDR 6 / 8 GB) aktuelles Update // Blu-Ray Brenner  Pioneer BDR-209 // 500 GB (SSD) + 4 TB (HDD) /// Nikon Z6 + 24-70 mm / 4,0

Wolve schrieb am 19.02.2020 um 11:30 Uhr

Pioneer BDR-209 EBK

VdL 2023 Premium (22.0.3.172) [VdL Pr.(20.0.1.80)] / VdL 2015 Pr. (14.0.0.187) // Windows 10 Home-64Bit - autom. Update // AMD Ryzen7 3700X (8x3,60 GHz) / 16 GB RAM // Radeon RX5700 (GDDR 6 / 8 GB) aktuelles Update // Blu-Ray Brenner  Pioneer BDR-209 // 500 GB (SSD) + 4 TB (HDD) /// Nikon Z6 + 24-70 mm / 4,0

Wolve schrieb am 19.02.2020 um 11:51 Uhr

Stand 1.52

??? - Tja, da ich nicht sicher bin, was 'Stand' meint, hab ich mal im 'Gerätemanager' reingeschaut; und siehe da, da steht schon mal ein anderer Typ:

>> P. BD-RW BDR-209M -.- und als Treiber-Version: 10.0.18362.1 (06.2006) [!!!]

Ist es das, was Du wissen wolltest ?

VdL 2023 Premium (22.0.3.172) [VdL Pr.(20.0.1.80)] / VdL 2015 Pr. (14.0.0.187) // Windows 10 Home-64Bit - autom. Update // AMD Ryzen7 3700X (8x3,60 GHz) / 16 GB RAM // Radeon RX5700 (GDDR 6 / 8 GB) aktuelles Update // Blu-Ray Brenner  Pioneer BDR-209 // 500 GB (SSD) + 4 TB (HDD) /// Nikon Z6 + 24-70 mm / 4,0

geschi schrieb am 19.02.2020 um 11:55 Uhr

Treiber und Firmware ist was anderes!!

Wolve schrieb am 19.02.2020 um 11:57 Uhr

ok, aber wo finde ich die Info zur Firmware bei meinem (eingebauten) Brenner ??

VdL 2023 Premium (22.0.3.172) [VdL Pr.(20.0.1.80)] / VdL 2015 Pr. (14.0.0.187) // Windows 10 Home-64Bit - autom. Update // AMD Ryzen7 3700X (8x3,60 GHz) / 16 GB RAM // Radeon RX5700 (GDDR 6 / 8 GB) aktuelles Update // Blu-Ray Brenner  Pioneer BDR-209 // 500 GB (SSD) + 4 TB (HDD) /// Nikon Z6 + 24-70 mm / 4,0

JaRa4711 schrieb am 19.02.2020 um 12:53 Uhr

@Wolve

Kuk hier

https://www.firmwarehq.com/Pioneer/BDR-209M/files.html

Zuletzt geändert von JaRa4711 am 19.02.2020, 12:55, insgesamt 3-mal geändert.

Gruss Jacques

Pro X14 (20.0.3.181), Musik Maker (30.0.3.39)

Intel Core i7-8700K CPU@3,7GHz, Mainboard ASUS Prime Z370-P, GraKa NVIDEA Geforce GTX 1080, 32Gb RAM interne UHD-630 GraKa.

2 Medion Monitore wobei einer über das DVI-Port der 1080 angeschlossen ist, während der andere über einen 1x2 HDMI-Switch an den HDMI-Ports der 1080 resp. der UHD-630 angeschlossen ist. Dieser wird betätigt je nachdem ob ich noch Win7 (erkennt keine UHD-630) oder 10 arbeite.