• Samplitude

  2 answers, most recent on 3/18/2025

  Latency in VST playback on Samplitude Pro x8
  Hi everyone, Hope someone can help. I'm totally new to using this kind of software (having previously only used Audacity in the past). I've connected my Clavinova via midi to my laptop through USB. Recording is all working fine... however the
• Music Maker

  One answer, on 4/9/2025

  RE: Synthesiser
  @David-Pook This is not how this works. Your synth can either send MIDI messages to Music Maker or an audio signal (its own sounds). If you have a VST instrument or effect with a resonance/frequency/tone setting you can try to map it to the knobs of
• Samplitude

  3 answers, most recent on 5/11/2025

  RE: Vita Cello out of tune
  @psychojosh13 Could be that some samples themselves are slightly out of tune because they were recorded that way. Usually, each pitch has multiple samples (maybe 3 or 4) which alternate between each key press to prevent a machine gun effect. If one
• Samplitude

  4 answers, most recent on 1/11/2025

  Can get Samplitude to record in 96kHz
  I don't know how much it matters, but every time I switch Samp and my interface (Antelope Zen Q) to 96, they both switch back to 44.1 automatically. After wrestling with this set up for the last month trying to do basic recordings, it seems I
• Music Maker

  3 answers, most recent on 4/11/2025

  RE: Automation missing in 2025?
  @ParadoxMM The Effects menu entry only works if you have objects on your track selected. And then you need to click the Enable checkbox in the dialog. You might be able to automate VSTs via your MIDI controller or the MIDI Editor, if they have the
• Music Maker

  27 answers, most recent on 1/7/2025

  RE: How to turn off loop preview?
  @DonSound Hi, Your requests 1 and 2 would be good. Can you explain 3 a bit better please? More detail. BTW, Music Maker is not a full DAW. That would be Samplitude Pro X. In that, I can preview any loop. The loop is not displayed on the timeline as
• Samplitude

  40 answers, most recent on 4/15/2025

  RE: Real Time Varispeed Sound Quality in Samp & WhichSound Forge Version?
  @gregory-battaglia Open the program settings and click on the audio settings. Make sure you have selected an ASIO driver. Samplitude comes with Magix Low Latency driver, but I recommend you install the newest version of ASIO4ALL because Magix Low
• Samplitude

  No answers, created on 3/2/2025

  Melodyne 5 essential cursor not following Samplitude Pro X8 cursor
  I was hoping someone could shed some light on this issue I'm having. As the heading is stating, I cant get Melodyne 5 essential cursor to follow Samp's cursor. I have looked through the online manuals for both Melodyne 5 essential and Samp Pro X8.
• Samplitude

  8 answers, most recent on 4/14/2025

  Instabilité
  Bonjour, voila plusieurs mois que Samplitude pro X8 est parfaitement instable sur mon pc sous windows 11. Il doit obligatoirement être passé en mode temps réel dans le task manager sans quoi il frise constamment, il crash tout le temps sans raison,
• Samplitude

  2 answers, most recent on 3/18/2025

  Internal Error: Multi CPU Bouncing may have failed
  I keep getting this error randomly. Happens on different projects on different tracks and during different format exports (FLAC, mp3, etc). And sometimes doesn't happen at all and the export is successful.   System Specs: Samplitude Pro X8
• Other products

  5 answers, most recent on 1/5/2025

  RE: Independence Pro 3.3
  @Astraios The version number in the splash screen might not be correct. It's the one at bottom of the Preferences Tab. If I'm correct then version 3.6 is only available if you have Samplitude. You can download it under the Help menu and then click
• Video Pro X

  14 answers, most recent on 5/3/2025

  RE: Getting rid of Audio Description
  @rickduley Hi Rick, I presume that the unwanted dialogue is mixed in with the dialogue of the film, correct? In that case, you would need a tool to separate out the various voices and eliminate the one or ones that you don't want. Spectralayers Pro
• SOUND FORGE

  13 answers, most recent on 2/17/2025

  RE: Sound Forge 17 Pro 32 Bit Float Recording with Zoom F6
  HiThe same happens, when working with Samplitude's "Edit with external software" feature.An originally 48kHz 24bit recorded audio file is converted to 32bit float when sent to Sound Forge 18 for editing. Editing works fine so far, I just can't
• Samplitude

  7 answers, most recent on 12/29/2024

  RE: Playback along with audio stuttering every 1-3 seconds
  It can be problematic to use a wireless/USB device for recording/playback. I would recommend something that is connected via audio cable. DAWs like Samplitude record sample accurate. That's why you need a low latency connection. I have tested with
• Samplitude

  7 answers, most recent on 12/29/2024

  RE: [Solved] Playback along with audio stuttering every 1-3 seconds
  I have been trying to tweak and troubleshoot my Magix Samplitude settings for a few days now and I'm getting very frustrated 😰Hoping you experts can help! Problem When I playback, I get a minor sound delay before I hear the MIDI track, then ok for
• Samplitude

  7 answers, most recent on 12/29/2024

  [Solved] Playback along with audio stuttering every 1-3 seconds
  I have been trying to tweak and troubleshoot my Magix Samplitude settings for a few days now and I'm getting very frustrated 😰Hoping you experts can help! Problem When I playback, I get a minor sound delay before I hear the MIDI track, then ok for a
• Movie Studio

  20 answers, most recent on 6/2/2025

  RE: Mastering Suite has disappeared
  Thanks Ray and Jeff I was unable to "activate windows" (Windows 10) because it says I don't have a valid digital license or product key. My desktop is a rebuild. The only (reliable) shop in town had installed the OS about a year ago. They are
• ACID

  5 answers, most recent on 4/11/2025

  RE: ACID 11 PRO SUITE LOOPS
  @Ryan-Guiney There are two things I want to ask you about your installation of Independence. Are you running Independence inside Acid or somewhere else? I'm pretty sure it will not load any presets outside of Acid, simply because it is limited to
• Music Maker

  One answer, on 2/10/2025

  RE: Importing External Loops, BPM Match
  @Ward-Ron There might be a workaround if you create your own Soundpool. For example, look inside one Soundpool folder. There you'll find a bpm.inf. You can edit this file manually with a text editor like Notepad. This file contains the tempo
• Samplitude

  2 answers, most recent on 4/21/2025

  RE: Vsti sequencer midi out to external synth not working
  Thank you I did not know about this option. I should point out that this plugin (Orbit) strictly generates sequencer data and does not generate any audio so as a plugin, i need it to run via project clock/tempo and output its sequence midi data to
• Music Maker

  27 answers, most recent on 1/7/2025

  RE: How to turn off loop preview?
  Explain the easy part? :)  It's exactly like MM, only it's just sound and nothing else going on. Plain and simple. Why would you have something strange popping up just to listen to sounds together? Nobody does that. Well, almost. You play the loops
• Audio Cleaning Lab

  One answer, on 1/27/2025

  RE: How to chose a range of audio to pick for Noise Reduction?
  @Clifford-Bowman I recommend you use the 32 bit version. This version shouldn't have the same problem with selecting and updating the GUI as the 64 Bit version. Or pick the noise sample in the main effects view, then switch to the detail view. This
• Samplitude

  40 answers, most recent on 4/15/2025

  RE: Real Time Varispeed Sound Quality in Samp & WhichSound Forge Version?
  Much of the time that I open Samplitude it will be simply to play a WAV file and to pitch shift it down a bit. Regardless of the "theme" (e.g. "skin"?) you choose, when you open a WAV file does the transport window always immediately open? If not,
• Movie Studio

  52 answers, most recent on 3/8/2025

  RE: Update
  @Gid Hi, The patches for MMS/VPX are listed under MAGIX Hub, New Features or by clicking on the Feedback button in the top menu: That's it, that's all. As we know from the Vegas forum, during insolvency, the Vegas Team was able to increase its