• SOUND FORGE

  13 answers, most recent on 8/8/2025

  RE: Can't register SF-7b even with the key
  Thanks very much for the link. I was encouraged to get it. I followed the instructions exactly, but unfortunately, my key was rejected as "invalid". I checked and rechecked the key and it was just as I got it originally from Sony support. This same
• Movie Studio

  4 answers, most recent Yesterday

  RE: Program fonts
  Thanks John but I don't have a problem with the icons, it's the label writing. I have to squint and get really close these days to read the little fonts, either that or remember what each one says which again these days is a little dangerous. Using
• Movie Studio

  22 answers, most recent on 8/13/2025

  RE: Support and TICKETS
  Thanks CubeAce, but that's not the problem. 1. It's not the effect of a third-party provider. 2. My computer performance is perfectly sufficient with a Ryzen 7 and 32GB of RAM. Especially since version 2025 on an old PC with an Intel i5 and 16GB of
• SOUND FORGE

  6 answers, most recent on 8/5/2025

  RE: Having Problems With Sound Forge 17 Crashing Or Otherwise Not Working?
  Thanks for the tip SP. I went into the registry and deleted the Magix Low Latency 2016 ASIO key and rebooted. I removed the command to run in compatibility mode and my crashing problem immediately returned. Turned the run in compatibility mode
• Movie Studio

  23 answers, most recent 2 hours ago

  RE: MAGIX Video deluxe 2026 Premium MPEG_4 Activation problems
  Hi Everyone, Thank You all so much for all your help and support with the problem I had with Magix Movie Studio activating the MPEG 4. I Have finally been able to Activate and all is well. I have been without the program for six weeks trying to
• Movie Studio

  9 answers, most recent on 8/14/2025

  RE: MAGIX Video deluxe 2026 Premium: old serial number NewBlue remains
  Hello, how are you? I'm glad you were able to fix your problem. I have purchased version 2026 and what there is no way for it to work is: proDAD VitaScene V5 PRO included in my version. Reading your comment, I thought I might have an older version
• SOUND FORGE

  27 answers, most recent on 8/16/2025

  RE: MP3 conversion glitches
  Hi Rick, Attached is a the media report for one of the files at random. Sorry, the forum won't allow a text file, so I had to take a screenshot. By the way, according to a search I did, SF18 uses the Fraunhofer MP3 encoder, but SF18's Batch
• Movie Studio

  9 answers, most recent on 8/6/2025

  RE: The software will NOT complete loading and shuts down.
  @Ronnie-Stiltner Welcome to the Magix user to user forums. Unfortunately, your first post is to a thread which is about a very different question to the one you ask, hence it has been hidden. Please create a new thread with your question, thank you.
• SOUND FORGE

  One answer, on 7/29/2025

  sound forge 9
  Hello, I just purchased a new computer with Windows 11. I've tried over and over to install the program using the disc and the download from the Magix site. After installation, the program wants the serial number and then a long authentication code.
• Video Pro X

  4 answers, most recent on 8/15/2025

  RE: Reset programme settings to default. How to reinstall after restart.
  @George-Monaghan Hi Thanks for the information and pleased to hear the reset fixed the issue. . . . . how do I get them loaded back into Pro X 16 . . . . I would not advise loading these back into VPX 16, the fixed issue may be re-introduced. Making
• Video Pro X

  4 answers, most recent on 8/15/2025

  Reset programme settings to default. How to reinstall after restart.
  Reset programme settings to default Video Pro X 16 Latest Updated version. Windows 11 I had an error generated that there was a codec issue when rendering in HEVC format. The same error was given for the MPEG4 output format. The suggested fix by the
• SOUND FORGE

  27 answers, most recent on 8/16/2025

  RE: MP3 conversion glitches
  Hi Rick, I'm using SF18, but am trying this in SF14 now, too. I've just encoded one chapter on its own in SF14 and so far, it seems OK. But it's so random that one file could be fine and another might have glitches. And yes, as mentioned, I'm
• Music Maker

  6 answers, most recent on 8/4/2025

  RE: Help
  Hi, I had to install my Music Maker on a new PC because the old PC got damaged. I cannot find the email with the activation number. can you please help thank you I have been sending emails since July 1st, they reply with a ticket number and they say
• Video Pro X

  3 answers, most recent on 8/5/2025

  video pro x - update 22.0.1.270 (today!)
  Hi, today I was surprised by this update today. However, when I clicked on the update number, the system didn't display the content of this version! I was confused because the feedback refers "release" to version VPX17, the content of which
• Movie Studio

  6 answers, most recent Yesterday

  RE: Magix video deluxe 2026
  Hi, @Johnebaker: Thanks for your last tip, it changed my work flow. Just one comment...I am working with double8 and super8 mm films. When digitizing those films the result is an MP4 running at 20fps. The original film is however 16 resp 18 fps. To
• Movie Studio

  69 answers, most recent on 8/10/2025

  RE: Unable to import MKV files into Video deluxe 2026 Plus, Windows 10
  Thanks for all your comments - still following them - all helps. @Can-Dive - cleaning head might be an idea, so long as no risk of damage. I have a bit under 60 hours of tape in total - does that count as a lot? Maybe not? However, over time I may
• SOUND FORGE

  15 answers, most recent on 7/27/2025

  RE: Scripting question
  Thanks SP, I was literately searching for the text string "ForgeApp". I'm currently using Visual Studio Code to work on Scripts. I've never actually used Visual Studio. I did use Atmel Studio (long before Microchip bought them) and I believe Atmel
• SOUND FORGE

  27 answers, most recent on 8/16/2025

  RE: MP3 conversion glitches
  Well, it's strange because I'm using Reaper for 15 years without a hitch. I have encoded to 128 kbps on the new PC and didn't hear of any problems from clients (I tend to batch the files and send them off in a fire and forget sort of way). The
• SOUND FORGE

  4 answers, most recent on 8/4/2025

  Record Keyboard Shortcut
  Hello, I want to assign various functions in Sound Forge 10 (Windows) to the function keys on the keyboard. It's rather easy to do and I have many functions already assigned. Ctrl+R opens the Record Dialog box, however I cannot seem to find the
• Video Pro X

  11 answers, most recent on 8/10/2025

  ProX will not write to DVD DL discs
  I use ProX to write recorded movies to DVD. Writing to ordinary DVDs is fine but for longer movies I need to write to write to Dual Layer Discs. I have tried both DVD+R DL and DVD-R DL discs and all I get is an error dialog saying that the disc
• Movie Studio

  8 answers, most recent on 7/29/2025

  RE: Text to Speech conversion
  Hi all, Thanks for the reactions, most appreciated. The version of VDL26 I bought (just a few weeks ago) is 25.0.1.248. I also downloaded the offered extra content and checked on the available updates. Yes I know how to use the hub and I am logged
• Movie Studio

  23 answers, most recent 2 hours ago

  RE: MAGIX Video deluxe 2026 Premium MPEG_4 Activation problems
  @PETER-SMITH1397 Peter, I just used regedit.exe and it deleted that key without issue. Here's what I did: In the Windows search box, type in regedit. On regedit.exe, right-click and choose Run as Admin (assuming you're logged on to Windows as an
• SOUND FORGE

  15 answers, most recent on 7/27/2025

  RE: Scripting question
  Hi SP, It took a while but I got finally Visual Studio to open a script without errors. It wasn't difficult, but I have only a limited knowledge of using Visual Studio. What a difference it makes being able to see the definitions or implementations
• Music Maker

  2 answers, most recent on 7/31/2025

  2026 trial download
  Hello.I am trying to download Music Maker 2026 trial and I get a blank error message: These are the specs of my computer: Edition    Windows 11 ProVersion    24H2Installed on    ‎7/‎27/‎2025OS build    26100.4770Processor    12th Gen Intel(R)