Search the MAGIX Community for tutorials, questions and solutions as well as for forum members

@me_again Hi, I've been ignoring the 239 update,, MMS was open so I created a random project with half dozen files, saved it, set auto save to 1min, the screen flashes very quickly roughly every minute. I closed MMS, it asked me if I wanted to save

Movie Studio

90 answers, most recent on 1/13/2025

RE: Slideshow-Reducing photo length merges Audio track

@johnebaker @me_again @Can-Dive @AAProds Well this has gone apace since I last looked. Glad it works as it should in VPX although I hadn't tested that yet. I can find no mention of it only working in certain instances within the manual so I conclude

Samplitude

7 answers, most recent on 12/16/2024

RE: [Closed] Hardware Controller Mapping

Guessing this thread might be dead, but better late than never I guess. I'm still reading this though... almost 9 years after I asked my question :p I'm actually not using Magix any longer, since it was in an era I still used Windows...However,

Movie Studio

15 answers, most recent on 5/13/2025

RE: Very high RAM usage even with a few slides

@Willy-Pesnec As I first reported, the amount of images showing in the import section does increase ram use but I had over 2,000 images of which half were at least 46MBs each and my physical ram usage did not go above 8.6GBs but the commit charge

Music Maker

21 answers, most recent on 12/21/2024

Old soundpools and general questions

Greetings... I'm coming back to Magix Music Maker 2025 Ultimate vol 2 on Windows 11, and I'd like to use it with some sound pools I bought 10 years ago for Magix Music Maker 15. I have the original CD's and I've copied them to my hard drive, but

SOUND FORGE

13 answers, most recent on 6/21/2024

RE: Sound Forge Scripting - Efficient Cassette Tape Archiving

@SP. What I've actually been doing manually is copying the processed "side b" audio, copying it, pasting it at the end of the quad file, and then converting the quad file to stereo. This avoids the need to make a new blank stereo file to paste

Movie Studio

66 answers, most recent on 1/29/2025

RE: The output formats are messed up in Movie Studio 2024

@clement5 Hi John C . . . . apparently lifted from a VHS tape likely of a broadcast . . . . IMHO if that was the case then there should be no dust, or foreign objects lodged in the fim gate which are clearly seen in the video files you provided.

Movie Studio

3 answers, most recent on 8/28/2024

Best Quality Export

I have been using Movie Studio 2024 for approximately 6 months and have found the application buggy as hell. For example, if I'm working on one end of a project, and I move back to the other end of the project, I find that clips sometimes disappear

SOUND FORGE

13 answers, most recent on 6/21/2024

RE: Sound Forge Scripting - Efficient Cassette Tape Archiving

@Dan-Hicks This script only processes the current file in Sound Forge. The changes are not automatically saved. Save this script into the Sound Forge script folder (look under Tools > Scripting): using System; using System.Windows.Forms; using

SOUND FORGE

42 answers, most recent on 5/28/2025

RE: Batch Processor Crashing

@ItsMeTho Here are some screenshots that show where to find the context menu entries: I also installed the trial version. Which steps are you doing to crash the software? Ok thanks, I modified 'MUIVerb'. Haven't restarted yet; guessing that

SOUND FORGE

2 answers, most recent on 5/8/2025

Wav Files Analysis - Key And Tempo

Hi, can SoundForge Pro 18 batch analyze key and tempo of .wav files?I don't want to have to shell out the cost for Mixed In Key 11. Been trying analysis with Traktor Pro 4 and it's really struggling with wav files. The ID3V2 tags are inconsistent.

Movie Studio

10 answers, most recent on 4/20/2025

RE: Magix Movie Studio 2025 TRIAL

Hi Ray & John EB, This is what I did last night. I tried some of your suggestions but it was a disaster. I changed the settings in the program to use the CPU and actually got something on the timeline but it was all jerky. Tried to burn a

Movie Studio

84 answers, most recent on 8/5/2024

RE: Linking "videos" or "projects" question

@AAProds Ok, that's understandable 👍 It's ok at my end, I can see most of the controls in the fxs & I like to be able to see the half dozen tracks but I'll see what I can do in future. Is this any better? I had to zoom in when editing it because

Movie Studio

19 answers, most recent on 6/24/2024

RE: Saving videos question (Saving YouTube vids to PC for later)

@Eric-Elliott Hi. I have just seen your reply an answered some of my thoughts that I just posted on your other topic. I still think four months is not enough time to see if YouTube will work for you or not. For most people it takes at least two

SOUND FORGE

11 answers, most recent on 5/10/2025

RE: SF 18 Pro Trial Crashing

@ItsMeTho Interesting. Usually there should be an error message that the sample rate couldn't be set instead of a crash. But good to know that you found the solution Thanks for all the helps. 😊 Ya. I think it's strange behavior in general because

Movie Studio

51 answers, most recent on 12/14/2024

RE: How to burn files to BD with menus but without having to re-encode?

@jak.willis Because if I’m encoding in 720x576 then it will be throwing away some pixels - am I right? Surely the answer to that largely depends on your original files. If the source of those files was anything above 1024x576 then pixels surely

Movie Studio

6 answers, most recent on 12/4/2024

RE: Custom Buttons on BluRay Menus Throw Errors on Menu Encode

Seems like creating a new button doesn't set the style attribute like you were able to modify in DVDA (button styles had a few options like text only, text and image, and image only IIRC). You also could modify all those template buttons too, unlike

Movie Studio

43 answers, most recent on 7/18/2024

RE: Can not trim or delete portions of audio

@Eric-Elliott I say the time line only shows one photo and then the blank space. It has everything to do with the length of time it shows. Still images only display the very start of the object, since every following "frame" is exactly the same.

Movie Studio

35 answers, most recent on 11/12/2024

RE: What Apple format: Apple ProRes or HEVC codecs can Movie Studio run?

@Gid "So the big question is why do you want RAW when that is related to the video, esp seeing as it's the audio you seem to be more interested in?" Since I've had the fortune of 'regular' camera access including external microphones (sometimes) my

Movie Studio

3 answers, most recent on 9/24/2024

RE: Losslessness(?)

@me_again @johnebaker Hi Andy, John. I have been exporting my MP4 videos as I frame only for about three and a half years now. The files don't necessarily have to be huge depending on the use case. For just playing back on a PC or TV the export can

SOUND FORGE

13 answers, most recent on 6/21/2024

RE: Sound Forge Scripting - Efficient Cassette Tape Archiving

@Dan-Hicks This script will allow you to select a directory and will then run over all files in this directory (all subfolders!). The default path is C:\Users\Public\Documents\ You can change the default path by editing the script. Read the comments

Photostory

4 answers, most recent on 9/10/2024

RE: Crop to Fit Monitor

@Todd-Nebel Hi, What is the resolution/aspect ratio of your project? It should be the same as for export. On the startup screen, if there is an option to "Crop photos to fill frame" - uncheck this before starting. In my version 20.0.1.62, which is

Movie Studio

15 answers, most recent on 7/5/2024

RE: Puting finished movie with Title Page + chapters onto a USB stick ?

Hello to you both, and sorry for taking awhile to reply i been busy....both your replies are enlightening.. and a bit depressing too, lol.. I thought it was me who had missed something. like a simple setting, or button i should of clicked, was the

Movie Studio

24 answers, most recent on 2/3/2025

RE: Edited video length

@Jennifer-Wilson Hi, I understand and I'll probably add to your stress. Remember, you are going to keep the original videos for posterity, but you should make something that people would actually watch and want to keep for posterity. Try to find