• Movie Studio

  14 answers, most recent on 3/26/2026

  RE: Hardware Rendering
  The project I used was my own, an older Disneyland trip from 2016, 32 minutes running time. Collection of video, picture collages and other effects. I have additional metrics, using the exact same project as in the above and below hence a relative
• Movie Studio

  16 answers, most recent on 9/5/2025

  RE: Blu-ray media created playback issue. Image bounces/jitters
  @calamar Hi The change (reduction) of frame rate is the most likely cause of the jitters. Try the following: Change the project settings to 1920 x 1080 50fps, the 50 fps helps with conversion of progressive video to Interlaced. In the Burn dialogue
• Movie Studio

  69 answers, most recent on 8/10/2025

  RE: Unable to import MKV files into Video deluxe 2026 Plus, Windows 10
  @Gra_Ham You may like to try this little hack I've successfully used for a similar problem using DIVX and MP3 in an MKV container. Split the file using gMKVExtractGUI (a Google search showed this https://www.videohelp.com/software/gMKVExtractGUI).
• Movie Studio

  69 answers, most recent on 8/10/2025

  RE: Unable to import MKV files into Video deluxe 2026 Plus, Windows 10
  @Gra_Ham Well done on the MediaInfo. The video codec is "MPEG 4 Visual", which is unusual. The framerate is also unusual at 30.068. Lastly, the audio might be causing issues, being Joint Stereo. A recode may be needed to get it to open in Magix. VLC
• Rescue Your Videotapes!

  35 answers, most recent on 7/16/2025

  RE: Geen geluid bij overdracht VHS-band
  Hallo Rob, Vooreerst bedankt om een hele opstelling te maken en dit ook nog te filmen.Maar mogelijk zit daar wel de oplossing in. Ik merk dat u dvd kiest voor opnamekwaliteit. Ik meen begrepen te hebben uit voorgaande berichten dat dit 'door de
• Photostory

  4 answers, most recent on 12/12/2025

  RE: Inserting image
  @Tom-Borg Hi, Version 25 is PhotoStory 2026. The tip while dragging 'Press Ctrl for further insert/replace options' is a new feature in 2026. However, I don't see it in Storyboard mode, only timeline. In Storyboard mode, dragging opens up a space
• Rescue Your Videotapes!

  35 answers, most recent on 7/16/2025

  RE: Geen geluid bij overdracht VHS-band
  @Bol @MV650 Hi Rob, Marc. I forget some people have probably never done this whereas I have been doing such things for over 40 years. Apologies for that. Personally I would recommend any specialised electronic contact spray from WD40 or Radio Spares
• Movie Studio

  70 answers, most recent on 9/19/2025

  RE: Reasonably affordable graphics card for Magix Movie Edit Pro Plus
  It has always been suggested that if you have a dedicated GPU, that you disable AMD's iGPU. This can only be done in the BIOS (the same with Intel's iGPU), so you have to have some skill and confidence in working in the BIOS. The question for our
• Movie Studio

  48 answers, most recent on 9/29/2025

  RE: Weird issue with using Smart Copy/Smart Render in MEP 2019 Premium
  @jak.willis Jak, yes, as I said, interesting. To put it more bluntly, MEP2019 is 6 versions old. It may have been a bug then. The latest version doesn't behave like MEP 2019; it doesn't say it will but then doesn't. Contrary to my comment
• Movie Studio

  2 answers, most recent on 7/14/2025

  [Closed] Freezing in my projects (Program has stopped responding)
  VEGAS Movie Studio 16.0.0.175 PlatinumI've been using Movie Studio for several years, but when I upgraded my computer I never expected this. Here's my current system specs.New machine...Device name ALPHA Processor Intel(R) Core(TM) Ultra 9 285H
• Movie Studio

  5 answers, most recent on 9/21/2025

  RE: Menu Template problems
  @jak.willis, Hi Jak . . . . when I click on 'Last templates' nothing comes up. If I double-click the blank 'Last templates' section, a small dialog comes up saying 'Could not load the menu template! . . . . The 'last used' template feature should
• Movie Studio

  22 answers, most recent on 4/9/2026

  RE: MS re-names every new import to the name of the last saved project!
  Previous comment deleted and reposted due to a spelling error in the original, because I can't do edits on my posts. @Apollo89x When "Importing" footage into the MS program, regardless of whatever the footage's file-name is :: MS display's it's file
• Other products

  6 answers, most recent on 11/11/2025

  RE: I purchased Video Deluxe 2026 ULTIMATE but was sent wrong link
  @fuss To my understanding Video Deluxe Premium is the software and it's identical in the Premium and Ultimate tier. Ultimate just has additional AI and Magix content stuff. But yes, currently support seems to be hard to reach and might not even
• Video Pro X

  33 answers, most recent on 7/15/2025

  RE: keyframe bugs remaining in the current version of VPX17 (v..269)
  @Betovalle Hi . . . . it involves a complex project with intervals with several keyframes, hoping not for a miracle, but for something productive, agile that eliminates ghosts and maintains cleanliness and referential integrity . . . . Complexity of
• Movie Studio

  48 answers, most recent on 9/29/2025

  RE: Weird issue with using Smart Copy/Smart Render in MEP 2019 Premium
  @AAProds - Progressive to Interlaced conversion. As requested here's a small zip file to download. https://drive.google.com/file/d/1d4vJujeRaRIq4xidmKM0vgwvJ1DA3RdR/view?usp=sharing It contains two 6 second files. Original Progressive mp4 and
• Movie Studio

  48 answers, most recent on 9/29/2025

  RE: Weird issue with using Smart Copy/Smart Render in MEP 2019 Premium
  AFAIK, you cannot do this, there is more to this I can do it, and have done it, with several editing/DVD programmes including Vegas Pro, VMS and DVDA. The image isn't changed. The two fields are the same. It's just that they aren't taken from two
• Movie Studio

  48 answers, most recent on 9/29/2025

  RE: Weird issue with using Smart Copy/Smart Render in MEP 2019 Premium
  AFAIK, you cannot do this, there is more to this I can do it, and have done it, with several editing/DVD programmes including Vegas Pro, VMS and DVDA. The image isn't changed. The two fields are the same. It's just that they aren't taken from two
• Video Pro X

  12 answers, most recent on 10/25/2025

  RE: ProX will not write to DVD DL discs
  @rickduley Hi Rick, My method of creating DL Discs from VPX footage is to NOT attempt the burning in VPX! For me, this has been the case for several versions of the software. The reason for this is that DL Discs require a nominated "split point",
• Movie Studio

  9 answers, most recent on 8/14/2025

  RE: MAGIX Video deluxe 2026 Premium: old serial number NewBlue remains
  @Bruce-Henderson Hi . . . . This is my first experience of using the forum so was unaware that I was “hijacking” another’s thread.  ... So get off my case moderator ! . . . . It is part of a Moderator's role to ensure that a users forum topic does
• Movie Studio

  7 answers, most recent on 9/4/2025

  RE: Video playback stutters
  @Frederik-deRoo Hi . . . . I changed the files into H.264 . . . . Presumably you kept the file resolution to 3840x2160 (4K UHD) . . . . I think i need to update VDL because the option isn't there . . . . You may, VDL 2017 does support 4K UHD when
• Off topic

  160 answers, most recent 13 hours ago

  RE: Magix support has not responded to support tickets for months
  Just a follow-up on the comments from the now banished user about Magix On-line World and Xara On-line and to clear up any misconceptions about the statements: As of 2025, OVHcloud has taken over as the hosting provider for Magix and Xara Online
• Off topic

  160 answers, most recent 13 hours ago

  RE: Magix support has not responded to support tickets for months
  @Christiaan-Deliaert Moderators are fellow users of Magix software, not Magix employees so there is little we can do to directly help in this situation, sorry. "Rescue Your Video Tapes" is sold as a "boxed" item, if I remember correctly, since it
• Video Pro X

  25 answers, most recent on 2/11/2026

  RE: Cannot start VPX17 by double-clicking on MVP file
  @emmrecs Hi Jeff, Thanks for taking a look. I don't get the choice about opening the file - "Always" or "Just once" - for MVP files. That is, I don't see this when right-clicking on the file, "Open with." With some other files, I get the choice,
• Movie Studio

  22 answers, most recent on 1/7/2026

  RE: Unable to capture audio during Screen Recording -Video Deluxe 2026 Plu
  @AAProds Hi Al, Just to make sure, I am using version: 1.0.59.0 of Magix Capture. Is yours the same? John, not correct. Magix will record audio. I think that we established when it first came out, that the new Screen Capture Mode in Magix Capture