• Movie Studio

  27 answers, most recent on 2/25/2022

  RE: MEP 2016 Plus - Successful VOB - But No Sound
  @CubeAce Hi Ray . . . . I was always of the impression that on an analog television that the very top of the image (and possibly the very bottom of the image) . . . . You are correct for PAL there are lines missing top and bottom, usually there were
• Movie Studio

  27 answers, most recent on 2/25/2022

  RE: MEP 2016 Plus - Successful VOB - But No Sound
  @CarpentersMate @AAProds @johnebaker Hi Mike. I don't feel like I am the expert on this topic here but a few of your comments have me puzzled.   I was always of the impression that on an analog television that the very top of the image (and
• SOUND FORGE

  10 answers, most recent on 2/19/2022

  RE: How do I turn the limiter off when recording?
  It certainly appears there is some kind of limiting happening. I would look at your soundcard/interface settings. Is the audio distorted some? Many folks make the mistake of feeding a line level signal (-10 or +4 dBm) into a microphone level input
• SOUND FORGE

  15 answers, most recent on 2/8/2022

  RE: Wavehammer 2.0, can someone elaborate a little on it?
  As for Soundforgpro itself, I think the more plugins you occupy, the less control and sensibility you dominate. SFpro has its own workflow clearly divided in1, Process: here the fundamental go e.g. Normalize-[sys]Maximize peak value can drift your
• Other products

  No answers, created on 2/5/2022

  Video saver from Magix, to transfer video from HI8 analog camcorde
• Video Easy

  No answers, created on 2/5/2022

  Video saver from Magix, to transfer video from HI8 analog camcorde
  453 / 5 000 Oversettelsesresultater When using video saver from Magix, to transfer video from the HI8 analog camcorder, the movies get a data rate of 3867 kbps, a total speed of 3995 kbps and a bit rate of 128 kbps. This gives a very poor quality of
• Rescue Your Videotapes!

  No answers, created on 2/1/2022

  Warped/fluctuating video image and high frequency tone on background
  When capturing my old 8mm analog video cam corder. Operating system windows 10. Using pal-B standard. Tried pretty much all variation of video quality settings. Video is warping during transfer and after finishing it to hard drive. Nothing helps
• Video Easy

  23 answers, most recent on 1/9/2022

  RE: Terrible lip sync!
  @David-Roxburgh Hi David. I haven't touched DVDs since Win 7 or encoded from a VHS tape since Win 98. 😂 So many people have internet now there are easier ways to distribute material to anyone that needs or wants it. The quality of transfers from
• Movie Studio

  25 answers, most recent on 12/28/2021

  RE: Quick Time Movie Export (Advanced) Not Working
  @CarpentersMate @johnebaker @me_again Hi Mike. I'm afraid I'm not in your world of having to create files from old screen ratios or from trying to grab video from analog sources so my experiment was to grab one of my own files and change it's screen
• Video Easy

  No answers, created on 12/27/2021

  Digitalisierung von analogen Videos (Hi8) mit Grabby von Terratec
  Verwendet wird von mir "Maxig Filme auf DVD Terretec Edition (7)". Bei Klick auf "Aufnahme" und "analoges Video" kommt die Meldung "In Ihrem System wurde Kein Aufnahmegerät gefunden". Die von Terratec mitgelieferte Software geht nur bis Windows 7.
• Photostory

  29 answers, most recent on 1/7/2022

  RE: curserlinie under afspilning
  Hej John. Så får du den sidste hilsen fra inden jul. Tusinde tak fordi du altid så beredvilligt hjælper mig med mine problemer. Jeg er en ældre mand der fylder 80 år til sommer, så jeg er fra den analoge tidsalder der ikke har den store indsigt i
• Music Maker

  19 answers, most recent on 12/22/2021

  RE: VST Perfect Drums
  <BLACKLISTED id="c:\Program Files (x86)\Common Files\MAGIX Services\MxSynth\World Flutes\World Flutes (64).dll"/>  <BLACKLISTED id="c:\Program Files (x86)\Common Files\MAGIX Services\MxSynth\Vita\Vita (64).dll"/>  <BLACKLISTED
• Music Maker

  56 answers, most recent on 12/14/2022

  RE: New Update for MAGIX Music Maker 2022 | Version 30.0.4.44
    <BLACKLISTED id="c:\Program Files (x86)\Common Files\MAGIX Services\MxSynth\World Flutes\World Flutes (64).dll"/>  <BLACKLISTED id="c:\Program Files (x86)\Common Files\MAGIX Services\MxSynth\Vita\Vita (64).dll"/>  <BLACKLISTED
• Movie Studio

  30 answers, most recent on 12/17/2021

  RE: Intel Graphics Drivers Advisory
  @CarpentersMate Hi Mike. I'm missing something, common practice (in the past) was without hesitation to 'Get Off' anything onboard: whether it be Video or Audio for obvious reasons. I think the short answer is. You are missing a lot of
• Movie Studio

  17 answers, most recent on 12/15/2021

  RE: GoPro Footage popping between clips (or on clip transition)
  @Robert-Kinney Hi . . . . Completely unplugged microphone and the USB-C analog converter and used onboard GoPro mic. Same result - still popping between clips. 😡 Have we isolated this to a GoPro problem? This isn't the first time I've had issues
• Movie Studio

  17 answers, most recent on 12/15/2021

  RE: GoPro Footage popping between clips (or on clip transition)
  Hi Ray - thank you for the information. I'll look closer at the Saramonic mics - I've browsed them for a few minutes looking at possibilities. As an update for the firmware: Updated GoPro to latest firmware. Tried external RODE microphone. Created
• Movie Studio

  17 answers, most recent on 12/15/2021

  RE: GoPro Footage popping between clips (or on clip transition)
  Hi CubeAce - yes, I am using a RODE VideoMicro (no battery) running through the GoPro USB-C to analog adaptor. My GoPro is a 7 Black series. Hope that helps.Rob
• Movie Studio

  45 answers, most recent on 12/11/2021

  RE: Update MEP 2022 and VPX 13 21.0.1.107
  @CubeAce, @browj2, @Former user, @AAProds Hi First my apologies, the sequence I posted ended up being a mix of 2 separate experiments I tried. I will remove it from my previous post. Ray analogy of a 3D stage is another way of looking at it, and as
• Other products

  28 answers, most recent on 12/19/2021

  RE: Windows Software to import Video with a Canopus ADVC110
  @johnebaker what sort of frame rates do you get on your exports when NV is used? You know the story of the hare and the tortoise... Except that, in this case, Ray's hare really does win the race! My system chugs along at around 5 frames per second
• SOUND FORGE

  8 answers, most recent on 12/12/2021

  RE: CoreFX vs EssentialFX vs Third Party.
  My 'standards' are subjective, and what 'works' for me in terms of the 'sound' and the UI. Everyone has their own favorites.I'm a old school engineer who initially worked with analog gear in the 1970s - 80s NYC studios if that says anything. My
• Other products

  28 answers, most recent on 12/19/2021

  RE: Windows Software to import Video with a Canopus ADVC110
  Well gents, I have good news to report. Got the Star Tech PCIe firewire 400 card and my Dell running Windows 10 recognized it as soon as I booted up the machine after the card install. No legacy drivers have been needed as of yet. Downloaded a trial
• Movie Studio

  One answer, on 12/5/2021

  RE: Recording from a camera download
  @Richard-Gaskell9308 Hi and welcome to the forum. . . . . "Select DV device driver" . . . .error message which says "Could not connect to selected device" . . . . Does your computer have a IEEE 1394 (Firewire) card installed - if not then you cannot
• Movie Studio

  7 answers, most recent on 12/4/2021

  RE: Strange behaviours identified and possibly some bugs.
  @FernandoBadler, @CubeAce, @AAProds Hi . . . . It's like asking a mechanic to fix / spot problems of a car through photos and videos; no easy task. . . . . A very good analogy 👍. This is where screenshots are very useful, jpg format is suitable;
• Movie Studio

  7 answers, most recent on 12/4/2021

  RE: Strange behaviours identified and possibly some bugs.
  @FernandoBadler Hi and welcome to the forum . . . . Alas, to be fair, I'm new to Movie Edit . . . . Have you come from a program where the track order is reversed and 'appears to be' in proper order ie the background track is the lowest and