• Movie Studio

  9 answers, most recent on 1/29/2025

  RE: No sound / audio in player and export
  I downloaded and ran mediainfo. I imported the same vob file as attached below. I clipped it at 6:00 and exported as an MP4. Audio is present at the start of the video abut cuts out after about 2:00. video continues with no sound. I did ungroup the
• Movie Studio

  9 answers, most recent on 1/29/2025

  RE: No sound / audio in player and export
  John, Thank you for your reply. I will try to address your questions as best I can. I have used this program for a long time but would consider myself a novice. I use it for one thing, to convert VOBs to MP4. So here goes:   1) PC is an older
• Movie Studio

  23 answers, most recent on 4/11/2024

  RE: MEP Premium 2022 - sync with wav file
  @magix_dr Hi Darek Also thank you for the samples. The video file is, as @emmrecs has commented, difficult to work with in Movie Studio, it takes too long a time to load for its length and playback is not smooth, I also see no video (?). The Wav
• Audio Cleaning Lab

  6 answers, most recent on 2/15/2024

  RE: Recording through Import Vinyl stops prematurely
  @SP. Thanks much for taking the time to respond. It stops at approximately 6 min and 30 seconds regardless of the record I'm recording; and it is happening in the middle of a song (not a silent stretch between tracks). Thanks for the suggestion on
• Music Maker

  3 answers, most recent on 8/31/2023

  RE: LOCKING UP
  @STEVEN-PRESS Music Maker keeps locking up and freezing on my computer. I have tried uninstalling and reinstalling the DAW. It is random, it will be working fine and then out of nowhere my computer freezes. I have to reboot the computer and start
• SOUND FORGE

  10 answers, most recent on 1/11/2025

  GoPro Audio Problem - Any way to restore
  Hi, I have a problem with the audio part of a video file recorded on a GoPro Hero 5. This happens occasionally. All other recordings of the day, about 2 dozen, were fine. I can hear the sound very faintly, but the waveform shows that there is audio
• Audio Cleaning Lab

  14 answers, most recent on 4/25/2024

  RE: Audio Cleaning Lab 4 - Changing Default VST's
  @browj2 Hi John, thanks for confirming the default issue. Sorry you had to go through so many ini files without coming up with a solution. I will definitely log a Support ticket with Magix. Regarding the jumpy playback in SpectraLayers, I can
• SOUND FORGE

  10 answers, most recent on 9/7/2023

  RE: How do I convert Markers to Regions in Soundforge 17?
  Sound Forge Audio Studio does not include the 'Markers-to-Regions' tool. You could insert regions manually using the current makers for reference though, double-clicking selects the waveform between two markers, then simply create a region using the
• SOUND FORGE

  6 answers, most recent on 1/10/2024

  RE: How to make DEL hard-delete selection again?
  Hi Rick @rraud,Thanks for your response. With 'Marked to be deleted' (which is my assumption) I mean that it's not actually deleting the selection, but is marking it in the waveform. The only reason that is that I can imagine is to mark it to delete
• Samplitude

  One answer, on 12/14/2022

  Waveform graphic does not appear when recording for 2nd time in VIP
    I have Samplitude Pro X 5 and when I first record in a VIP, the waveform graphic appears as I am recording. When I record AGAIN in the same VIP the waveform graphic DOES NOT APPEAR until you stop recording and then you can see the waveform. I
• Video Pro X

  29 answers, most recent on 4/5/2023

  RE: Adding audio causes export to crash.
  @AAProds Hi Al. The highest sample rate supported by mp3 is 48kHz. at 320kbs at a maximum bit depth of 24bits. Lower than supported files can also be produced by some applications as similar to the ones you showed us some time back that can cause
• SOUND FORGE

  7 answers, most recent on 4/10/2024

  RE: Chunks of sound missing after saving files
  I am using Sound Forge 14, and I work with mp3 all the time. After I originally record an hour long talk on a different recorder in mp3. I transfer the raw mp3 file to my windows 10 64 bit machine to do sound forge editing.   I work it down to a ten
• Movie Studio

  13 answers, most recent on 9/13/2025

  RE: Wich graphic card is better for Chroma Key effect ?
  @dan_lachance Hi Dan. I did say "a setting of 32768 for both should be sufficient. Possibly slightly lower." I was being cautious in case the audio file was lengthy or an unusual bit depth or for another reason a large amount needed to be loaded to
• Movie Studio

  8 answers, most recent on 4/6/2023

  RE: How does one separate the audio from video on a project?
  @Fred-Hoeser Hi Fred, In the Program Settings, Video/Audio tab, you can uncheck the parameter "Video/Audio on one track" to get Video and Audio on separate tracks. Also, under Import, check "Automatically create waveform during import." On the
• Movie Studio

  32 answers, most recent on 10/29/2023

  RE: blip/hiccups at start
  @AAProds Hi Al, are you saying the audio level must be zero at the butt join No, I'm not. What I'm saying is that all sound is transmitted in the form of waves; those waves have positive (expressed as, e.g. 0 to + 10) and negative (expressed as,
• Video Pro X

  32 answers, most recent on 1/18/2025

  "Missing" audio in VPX16
  (The thread title is deliberately cryptic!) but I wanted to seek the wisdom of fellow-users of this software about a very strange problem! I recently needed to digitise, for a client, a VHS tape. Following the demise of my computer which included a
• Movie Studio

  40 answers, most recent on 4/8/2023

  RE: won't update. it loops
  @CubeAce @francis-cumagun I suspect that the TS files are Transport Stream files, such as created by PVRs; essentially AVCHD files. If so, Magix will open them, although I don't get a audio waveform and timeline speed is awful (though that will
• Movie Studio

  11 answers, most recent on 11/4/2024

  RE: movie studio 2025 suite - sound missing on clips
  @spuddy13 Hi Brian, A few things: i also usually have video and audio on same track so its ticked unless i am adding music from another source and want to separate the audio and video on source I strongly suggest that you turn on video and audio on
• Movie Studio

  6 answers, most recent on 2/26/2023

  RE: Sound waveform
  @MonsterCarp @johnebaker One further thought. Below a certain track size, a high volume audio track can look like there is no waveform present. Try expanding the offending object to see if that is the case. Ray.
• SOUND FORGE

  6 answers, most recent on 7/11/2024

  RE: Trying to find alternatives
  @Ozy Are you talking about Sound Forge Audio Cleaning Lab or Sound Forge Pro? Both are completely different programs. Cleaning Lab only uses the Sound Forge brand. There are free audio cleaning tools as VST plugins available, for example the
• ACID

  267 answers, most recent on 4/2/2026

  RE: Feedback on ACID Bugs
  Things like better Audio Editing can be delivered via ARA2. WaveLab Pro 12 and Acon Acoustica Premium are both ARA2. The also support Spectral Editing, but for more advanced Spectral Editing, SpectraLayers is available. Melodyne and others can
• Movie Studio

  8 answers, most recent on 11/24/2023

  RE: Two minutes of music is "silent" or gone or...
  @FF22 While it's not impossible that you have found a bug, based on your other topic and this, in all probability the audio is getting messed up by user input. For example, the green volume curve can only be activated by you. You really need to go
• Movie Studio

  21 answers, most recent on 11/26/2023

  RE: Movie Studio 2024 Suite - audio is suddenly lost
  @EstMladen HiMladen. Somehow when you produced a separate audio track you also muted that audio track. Click on the speaker symbol to unmute. You also don't seem to have your program set to display the waveforms of your audio track which would give
• Video Pro X

  9 answers, most recent on 7/3/2023

  RE: Video Pro X changes project frame rate to 20 for no discernible reason
  @eSonOfAnder The frame rate is now set to 20 Hz. Always. I've done this multiple times now, and discovered it because every time I tried to export the movie for rendering, it had somehow decided to try and export at 20 Hz every time Hz -