• Video Pro X

  86 answers, most recent on 12/31/2021

  RE: What am I missing out on by sticking to V17
  @DesertSweeper Hi, Just so that everyone knows, what you refer to as V17 is VPX11 version 17.x.x.x. The product is now VPX13 version 19.x.x.x. There is nothing wrong with VPX11. Just keep working with it. Other than changes to the engine, there are
• Movie Studio

  10 answers, most recent on 10/23/2021

  RE: Upgrade to Movie Studio 18 Suite
  @KEITH-HOLMAN Hi Keith. I'll try to be precise about Hide's shortfalls which are not really shortfalls when I thought about it but more of what type of video clips can actually be used. First Hide must know and have a relative knowledge of what is
• Movie Studio

  24 answers, most recent on 11/23/2021

  RE: Where has ZOOM option gone in 2022 premium?
  @Peeteey Hi, Third option, raise a ticket with Magix and tell them to put back the zoom slider with % box. While you're at it, ask them to put back the z rotation handle on the image. Magix will not move unless many people complain. Until they do
• Other products

  One answer, on 10/16/2021

  movie studio 18 freezes as soon as i select a 3d text
  ive only had the software a couple of days after getting really disappointed that its nothing like 17 I ventured on only to find every time no matter what I do the program just freezes every time I select any animated or static 3d font for a title
• Movie Studio

  32 answers, most recent on 9/21/2021

  RE: BIT RATE QUESTION
  @VideoPro when I goto FILE >> MOVIE SETTINGS...It shows the project is at 44k and the option for 48k is greyed out. Why is that? Is that because when you start the project, if you select 44k, it will not let you change it?  I suspect so. What
• Movie Studio

  17 answers, most recent on 4/22/2022

  RE: [Closed] Zoom In Then Zoom Back Out
  @CLINT-DANBURY Hi Clint, The Camera/Zoom is a tool that helps you do a zoom in to a part (section) of an image over time, or zoom out over time. It's convenient and it saves the user from having to learn how to keyframe. It automatically places
• Movie Studio

  8 answers, most recent on 9/10/2021

  RE: Why add extra steps?
  @CubeAce Hi Ray, Yes, that is why I first suggested putting it under UserVideoEffects, which is the normal place and accessible from the SPR menu. The second option was to put it under PiP so that you can see the image. Third option is to put them
• Other products

  One answer, on 9/6/2021

  [Closed] Vegas Stream w/ Focusrite Scarlet Interface and Rode NT1 Mic
  No matter what I am getting a kind of buffering / static / stuttering sound when using Vegas Stream. I know it isn't the setup because in other program like Cubase and even Wirecast and Streamlabs it works fine?
• SOUND FORGE

  2 answers, most recent on 8/31/2021

  Horrible Static Sound coming from the left channel upon clicking recrd
  After installing Sound Forge 15 on my Dell Window Home Edition, When I click on the record button, this screeching static sound fires from the left output channel, together with a Windows chime sound, which is weird. I reinstalled the app, but the
• Video Pro X

  80 answers, most recent on 9/3/2021

  RE: Almost every time that I overlay two video clips, the audio is statick
  I have also been getting static on a project I'm working on at the moment. If you view the 2 images below - image static2a produces no interference but static2b does. The 2 segments that crossover are from the same video file. I do not have the same
• Movie Studio

  18 answers, most recent on 8/29/2021

  RE: Displaying video at the replay marker while dragging an object
  @johnebaker Yes not just a still image. Let me explain more: It's training material that uses slides. Rather than building rigid animations into the material using educational software that takes way more time, I use static slides, and I use
• Movie Studio

  18 answers, most recent on 8/29/2021

  RE: Displaying video at the replay marker while dragging an object
  @CubeAce I'm focused on the syncing, and I want to keep dragging a segment until a point of interest in it matches a point in the audio. When that's achieved the segment might end up overlapping with the next one, and I need to handle that. Let me
• Video Pro X

  80 answers, most recent on 9/3/2021

  RE: Almost every time that I overlay two video clips, the audio is statick
  @Jordin-Mayo I fully concur with what @CubeAce (Ray) has suggested. That "static" (which, as Rays says, actually isn't static) is the result of serious problems of interruptions to the signal flow; it is especially evident in the .mp4 video file you
• Video Pro X

  80 answers, most recent on 9/3/2021

  RE: Almost every time that I overlay two video clips, the audio is statick
  @johnebaker @Jordin-Mayo Hi Jordin. In my opinion that is neither static, clipping, or DC offset. It is either an audio buffer problem or a drive transfer speed problem. Remember when I asked you to change everything to 24 bit 48kHz? Now try
• Video Pro X

  80 answers, most recent on 9/3/2021

  RE: Almost every time that I overlay two video clips, the audio is statick
  @CubeAce They are all at 0.00Even if I put it below 0.00 it still does the static at the same amount.@johnebaker https://www.dropbox.com/s/gx4iaj2waow33r6/sample%203.mp3?dl=0heres the mp3 above, and i also have the mp4 too in case it was helpful
• Video Pro X

  80 answers, most recent on 9/3/2021

  RE: Almost every time that I overlay two video clips, the audio is statick
  @Jordin-Mayo Hi Can you export the audio as a MP3 file that exhibits the static you are hearing and upload it in a comment. John EB
• Video Pro X

  80 answers, most recent on 9/3/2021

  RE: Almost every time that I overlay two video clips, the audio is statick
  @Jordin-Mayo Hi Jordin. When you play just one file in something like Film and TV or VLC player, does there appear to be any static or a click? When you hear the 'static' is it just one or two clicks, or more at each join? If it is one or two clicks
• Video Pro X

  80 answers, most recent on 9/3/2021

  RE: Almost every time that I overlay two video clips, the audio is statick
  @browj2 Hey John, I just tried video clips from my cell phone and they didnt have static when overlayed. How do I make it so my Canon M50 also doesn't have Static?? It had static when I just used the microphone from the Canon m50 camera, but it also
• Music Maker

  One answer, on 8/10/2021

  No sound from new install
  Hello, I have installed Music Maker premium 2022 onto a new Windows PC. When starting playback for a project there is no sound coming from the program. I have updated the program with latest patch and adjusted the Audio settings as per the
• Video Pro X

  80 answers, most recent on 9/3/2021

  RE: Almost every time that I overlay two video clips, the audio is statick
  @browj2  So i watched the videos and I did a Jcut and seperated the audio but it is still making the staticky sound during overlay. Still working on getting computer information over to John EB as well.   @CubeAceI did exactly what you said and it
• Video Pro X

  80 answers, most recent on 9/3/2021

  RE: Almost every time that I overlay two video clips, the audio is statick
  @Jordin-Mayo Hi We need more information: Computer specification - see this topic for details of what is required and please quote the processor and graphics card/chipset make and model in full.  A Mediainfo analysis of one of the video files shown
• Video Pro X

  80 answers, most recent on 9/3/2021

  Almost every time that I overlay two video clips, the audio is statick
  every time I do J cut, I get a staticky sound. As you can see in the first picture, my volume is at 0.0 so it's not like that is affecting the clip at all. Even when I set it lower, it still makes a static sound. It's like this with every video I
• Movie Studio

  21 answers, most recent on 8/2/2021

  RE: Merge video files - or should that be superimpose or even overlay?
  @CubeAce Hi Ray, It would be nice to have similar tools in the Chroma Key section that Vegas has Vegas users would like to have those tools in Vegas as well. Your link is to Vegas Image which is an image editor, not the video editor Vegas. It is
• SOUND FORGE

  2 answers, most recent on 7/29/2021

  Soundforge 13 No data to the recording, no sound from speakers
  I am trying to record cassettes on Soundforge via a US equipped cassette deck, using Windows 10. I have used it before in Audacity, with good results. When audacity did not record, I tried it on my Soundforge 13. Same result - no data goes in, no