• Audio Cleaning Lab

  8 answers, most recent on 3/27/2012

  RE: Error with CD Writing
  Hi AFAIK no CD would write at such a low speed. Tthe 4x recording speed on both computers would suggest you are trying to burn to DVD or DVD RW discs!! The only other possibility is that you have a bad batch of CDs, or counterfeit
• Audio Cleaning Lab

  8 answers, most recent on 3/27/2012

  Error with CD Writing
  I have created two audio files which I have transferred from tape, the longest one being about 68 minutes. When exporting and trying to write to CD after a few seconds I get the error message: X Cannot write to disc - >Write error
• Music Maker

  4 answers, most recent on 12/24/2011

  RE: How do you load this software? JESUS!
  DVD drive will read a DVD disc. CD-ROM only drive will will not   A combined CD-ROM / DVD RW means it reads and writes both formats, I suspect you don't have a DVD reader or Writer in your PC, they are filthy cheap, about £15
• Video Pro X

  3 answers, most recent on 1/19/2012

  RE: does any body understand this burn error message I cant figure out whats wrong
  Hi The error reported on the line below indicates the disc may be faulty. 12/09/2011 04:54:22 PM.403:   AVSDK Message - ERROR: :Cannot write to disc -> No seek complete, medium possibly damaged (SK/ASC/ASCQ 03/02/00) Have you tried
• Video Pro X

  3 answers, most recent on 1/19/2012

  does any body understand this burn error message I cant figure out whats wrong
  12/09/2011 04:30:35 PM.762:    Booktype: don't care 12/09/2011 04:30:35 PM.767:   setting write speed to 2770000  bytes/sec 12/09/2011 04:30:35 PM.772:   this equals 2.000000x DVD / 15.702949x CD Speed 12/09/2011 04:30:35 PM.778:   Check on
• Movie Studio

  6 answers, most recent on 12/4/2011

  RE: reporting dvd image creation error
  Thanks. However, I tried both 1 and 2 and it said another error occured. Here is the log file -   -------------------------- 08/27/2010 08:33:42 PM -------------------------- 08/27/2010 08:33:42 PM.854:   DLLAV32.DLL loaded, all entry
• Movie Studio

  6 answers, most recent on 12/4/2011

  reporting dvd image creation error
  Hello,   When I try to burn a DVD, it says there is a DVD image creation error. There was an update recently. I used to be able to burn DVD just fine. I have tried to burn DVDs several times.  Here is the info from the report: Thanks in
• Photostory

  One answer, on 11/28/2011

  RE: why when I make and record a dvd on magix 10 deluxe does it play on some Dvds and not on others
  Hi This problem could be caused by faulty discs, cheap discs. Which brand and type of disk are you using?   Older DVD players have trouble recognising some DVD+R and DVD-R discs, and DVD+RW or DVD-RW not at all. The quality of the
• Movie Studio

  One answer, on 11/15/2011

  MEP MX Premium Export to YouTube Problem
  I'm using a one-year old PC with a 3.2 gigahertz Intel Core i7 960 (quad-core) processor, Windows 7 64-bit Ultimate (SP1), 12 GB RAM, over 5TB storage + SSD Drive, ATI Radeon HD 5800 Series Card, SB X-Fi Xtreme Audio, etc., etc.  While MEP 17
• Movie Studio

  One answer, on 11/8/2011

  RE: DVD-R vs. DVD+R for burning
  Hi It should not matter which you use with MEP.   What does matter is: 1.    Whether your DVD burner can recognise the discs - all modern ones can. 2.    If older DVD players can play the format, most modern DVD and BD players can
• Movie Studio

  One answer, on 11/6/2011

  Trouble burning Blu-ray disk that will play on Blu-ray player. Below is the error message.
  AM.019:    Booktype: don't care 11/5/2011 11:58:57 AM.019:   setting write speed to 8991000  bytes/sec 11/5/2011 11:58:57 AM.019:   this equals 6.491697x DVD / 50.969387x CD Speed 11/5/2011 11:58:57 AM.019:   -- Volume mounted
• Movie Studio

  2 answers, most recent on 10/27/2011

  RE: How do I delete old projects on MEP 16 to free up drive space?
  Hi It is manual deletion only, however if each project is entirely within its own folder than it is quickest to delete the folder, all the contents will be deleted within it.   Once deleted, and you have emptied the recycle bin, they will
• Video Easy

  One answer, on 9/15/2011

  RE: I cannot burn a dvd. Encoding errors
  Years ago I gave up trying to burn my DVDs from MEP, as it failed so often. Usually at the very end, like your example. Occasional tests show no improvement in MEP17+. I suspect (it's just a guess based on glancing through the log above and
• Movie Studio

  9 answers, most recent on 9/1/2011

  RE: Lost all settings
  Good day, gentlemen.  Just a few thoughts on this: Editing the program's INI file manually is by no means an officially supported workflow. You won't find anything in the official documentation of the program that will encourage you to edit
• Music Maker

  3 answers, most recent on 8/22/2011

  RE: file owner or administrator
  Your wrote "As far as burning a CD, I finally learned how, but now when I go to import, I only fine projects that I started and not the arrangements that I have saved for music editor to import from; I must have done something wrong when
• Movie Studio

  2 answers, most recent on 2/6/2012

  RE: Multi core for Pro 16
  Hi MEP17+Hd will use as many cores as required - an Intel i5 or i7 quad with 16GB RAM and Windows 7 64 bit should have more than enough power- no point in using a 32 bit OS as it will only recognise just over 3Gb of RAM.  I run an Intel Q8300
• Movie Studio

  One answer, on 7/17/2011

  Unable to burn video - getting empty ranges and kernelbase errors - Movie Maker 17 HD
  Everything is working fine until I try to burn the movie and I get a empty range error I ignore that and then I get a kernel error after that. here is what my error log is giving me. -------------------------- 07/01/2011 10:49:49 PM
• Movie Studio

  One answer, on 7/14/2011

  RE: My film clips wont burn
  Hi The log suggest that there is a problem with the disc(s) you have used.  Possible reasons are: 1.   After the first burn failure you have tried to write to the same disc again.  This is not possible because the burner has already
• Movie Studio

  One answer, on 7/14/2011

  My film clips wont burn
  Hi please help - Im trying to burn a short 8 min dvd. Everytime I try I get the following message. Internal error. I've tried two different dvd burners and get the same outcome on both. Here is a log of the
• Rescue Your Videotapes!

  5 answers, most recent on 7/11/2011

  RE: unable to burn
  Hi That narrows down the problem significantly either 1.   As all discs are failing the writer is probably faulty.  Can you write to a DVD using another burning program - if you do not have one download Starburn (it is free) and
• Rescue Your Videotapes!

  5 answers, most recent on 7/11/2011

  RE: unable to burn
  Hi That narrows down the problem significantly either 1.   As all discs are failing the writer is probably faulty.  Can you write to a DVD using another burning program - if you do not have one download Starburn (it is free) and try to
• Movie Studio

  4 answers, most recent on 2/28/2011

  Why does Magix claim that MEP17 is the "most stable version they have ever developed"
  Why does Magix claim that MEP17 is the "most stable version they have ever developed" when I get errors like this:   -------------------------- 10/2/2010 10:29:13 AM -------------------------- 10/2/2010 10:29:13 AM.595: DLLAV32.DLL
• Movie Studio

  7 answers, most recent on 2/17/2011

  Magix Movie Edit Pro 17 - Errors on burn, every time, repeatedly...
  I am starting to reach my wits end on this program. I am trying to burn a DVD and it never works no matter what configuration I do.   I set the program to record in NTSC Widescreen - living in USA - video is 1080p so it's of course
• Rescue Your Videotapes!

  One answer, on 1/24/2011

  RE: Why Unable to save finished videos to harddrive or dvd?
  I have the same problem.  After an HOUR of burning an 18min film, I get an ERROR in the final writing stages?  My computer blacks out and seems to go dark - wireless shuts off... then discs pops out with ERROR message.