• Rescue Your Videotapes!

  2 answers, most recent on 11/15/2020

  RE: Program does not see my old VHS player VERSION 3.0.1.25
  Hi John It's a different machine to 2012 posts. The software has been installed for some time on this machine but I had not used it. TBH I cannot remember if I have used it to record analog video since it was installed on this kit. It is, as I said,
• Rescue Your Videotapes!

  2 answers, most recent on 11/15/2020

  Program does not see my old VHS player VERSION 3.0.1.25
  I'm trying to run version VERSION 3.0.1.25 PC is running W10 with all updates applied. The VHS machine is connected to a USB port scart to 3 plugs via the red and white adapter. When I go to try and play something through the video machine the
• SOUND FORGE

  9 answers, most recent on 11/10/2020

  RE: Audio recording in stereo
  I am using an EMU1820m soundcard. Has an external box connected by a CAT6 cable. Will do resolutions up to 192k. Usually I use 44.1 or 48k. My record is ASIO stereo 5/6 on channel one. Playback is ASIO 31/32. Channel records perfectly in Cakewalk.
• ACID

  6 answers, most recent on 11/5/2020

  RE: How use Revolta 2 in Acid Pro 8
    Revolta 2 is a legacy Synth that is 32-Bit only and hasn't been updated There are too many free synths that are supported and regularly updated to care about this, frankly. It's not just about Revolta, it's about the strange MAGIX policy to her
• Movie Studio

  3 answers, most recent on 11/3/2020

  RE: Analogic recording stops continuously and regularly after some seconds
  @esaollikainen It could poor quality video tape, which causes your capture device to hiccup, thinking there is no video signal. A couple of things to look at: - Does it occur with other tapes? If not, it indicates that that tape is dodgy. If it
• Movie Studio

  3 answers, most recent on 11/3/2020

  Analogic recording stops continuously and regularly after some seconds
  Hi, I am using MovieEdit Pro 2016 Premium (15.0.0.(UDP3). I installed it just some weeks ago and at the same time I had to instal the driver for the red Magix - connector. Because I earlier used Magix Movies on DVD7. When I record VHS-video, the
• Music Maker

  One answer, on 10/30/2020

  Installed Instruments do not appear
  I bought in store analog synths but it does not appear in instruments after installation. Soundpools do appear. Trying to drag the instrument from store gives the errror: The file "\undefined` does not exist . Please check the file name and
• Rescue Your Videotapes!

  No answers, created on 10/26/2020

  Impossible de numériser une VHS
  Bonjour, je n'arrive pas a numériser mes cassettes VHS, d'une part j'ai changer mon adaptateur peritel en croyant que celui fournit était défectueux mais toujours le même résultat, j'ai l'écran de prévisualisation du projet qui est noir, et quand
• Video Easy

  5 answers, most recent on 10/25/2020

  RE: Hello, I have a sony DCR-PC103E and want to transfer my videos to DVD.
  @Erik-Geenen Hi Does Video Easy see the Roxio or Silvercrest grabbers when you select the Import from analog option? If the devices are not seen then they may not have 64 bit drivers installed. The Silvercrest drivers are here. Drivers for the Roxio
• Video Easy

  5 answers, most recent on 10/25/2020

  RE: Hello, I have a sony DCR-PC103E and want to transfer my videos to DVD.
  @Erik-Geenen Hi and welcome to the foum . . . . I connected my camera via the I-link. . . . . Are you connecting the camera to a Firewire input on the computer? If so the camera does not support DV output over iLink/Firewire. In Video Easy, if you
• Movie Studio

  12 answers, most recent on 10/21/2020

  RE: Massive Bug Report - Movie Edit Pro Premium 2021 just installed
  @Eelke-Schokker Bad analogy, it's like asking the car to go left and right at the same time, can't be done. It's not a design flaw, that is how it's designed. If you don't like it, raise it with Magix. Most users have two or more video clips, so
• Rescue Your Videotapes!

  23 answers, most recent on 10/14/2020

  RE: Magix Rescue Your Video Tapes doesn't recognise VCR
  @KAL00 Hi . . . . Tried the analog option without success but will try again with the linked driver you provided. . . . II assume you have the Stereo AV cables with a 3 ring and tip (4 pole) 3.5mm jack connector on one end and Yellow/Red/White RCA
• Rescue Your Videotapes!

  23 answers, most recent on 10/14/2020

  RE: Magix Rescue Your Video Tapes doesn't recognise VCR
  Thank you johnebaker I’ll try that one. I’ll only be using it for normal video cassette tapes it appears. I downloaded the RYVT from Magix site. Im trying to record tapes from a Sony DCR-TRV460E Hi8/8mm and also tapes from a Canon MD160 MiniDV.
• Music Maker

  10 answers, most recent on 1/3/2021

  RE: Audio Device Settings
  @Jeremy-Wooten Hi These are the settings that work for me - try them. If you have a different audio card is should still have a similar range of options as shown in the blue highlighted section of the image. When recording you select the recording
• Rescue Your Videotapes!

  23 answers, most recent on 10/14/2020

  RE: Magix Rescue Your Video Tapes doesn't recognise VCR
  @KAL00 Hi . . . . the correct driver please . . . . The K0065 driver you need is this one although this is the K0067 driver it is the correct one for the K0065 on Windows 10. . . . . I have been attempting to attach camcorders unsuccessful as it
• Movie Studio

  6 answers, most recent on 10/3/2020

  RE: Video & audio recording (Version 20.0.1.65) Premium version
  @Cal Just remembered that I wanted to comment on this. Busy week. There is a misconception by many people as to how recording using a video editor actually works. As far as I know, no video editor or even a DAW, records into itself, directly onto
• Movie Studio

  3 answers, most recent on 10/2/2020

  Why my 1-hour recorded video showing in "Projects" as a single frame?
  Why is my 1-hour recorded analog video presenting as a "single frame" in the "Edit" section of my program??
• Music Maker

  3 answers, most recent on 10/1/2020

  Same old downloads popping up
  Anyone know why I keep getting the same five available downloads since I upgraded to MM 2021: Five AM, Analog Synths, Tiny Percussion, Urban Drums and World Flutes. I download them, and they just come right back up the next log in.
• Movie Studio

  One answer, on 9/20/2020

  record VHS analog
  Play analog VHS display OK record analog start and right away stop
• Rescue Your Videotapes!

  No answers, created on 9/19/2020

  I can not import analogic videos in w7
  Hello, I have a terratec grabby device. Ihave installed the drivers and MAGIC VIDEO EASY software. When I select the analogic video input, there is not any device to be selected. I have Windows 7 and in the Control Panel there is not any device in
• Rescue Your Videotapes!

  One answer, on 9/14/2020

  [Closed] Unable to use 3rd party Analog for video capture in Windows 10
  I have three 3rd party USB analog digitizers that Vegas Movie Studio Planinum 9.0 can view but says it cannot open the device. One is Roxio Video Capture USB, Pinnacle USB, WinTV from Hauppauge. The Vegas Movie Studio Planinum 9.0 sees them all when
• Movie Studio

  8 answers, most recent on 9/9/2020

  RE: crashing after update
  @torrey-lafrance Just to make sure, is your recording source Analog? Please post a screen shot of the Video Recording screen showing the parameters. John CB
• Movie Studio

  8 answers, most recent on 9/9/2020

  RE: crashing after update
  @CubeAce Hi Ray Are you looking at the wrong device? The Blackmagic ATEM mini is here. - it is a multi camera input switch capable of recording, and outputting live stream mimicking a webcam over USB. @torrey-lafrance Hi Are you using the Analog
• SOUND FORGE

  5 answers, most recent on 9/9/2020

  RE: Tried to record Vinyl. The recorded file has a periodical beep.
  I am using SF 13 Pro (I used to use 11 on a different, old computer, and I had no problem). I am using USB interface. The recorded file contains a beep every 4.8 seconds or so. The sound of the beep is different each time. I followed rraud's