• SOUND FORGE

  77 answers, most recent on 2/4/2026

  RE: SFPro continually crashes - versions 14-18
  @SteveMTNO Good to hear that version 12 works. That's also the same version I'm mainly using. I also have 15 and 17 but they have some problems. If your hardware is officially supported by Windows 11 I recommend you install everything from scratch
• Movie Studio

  10 answers, most recent on 9/5/2024

  RE: MS 2025 Update to 24.0.1.206
  @AAProds Hi Al . . . . Shall we classify it as still "misbehaving" . . . . As it is a hardware issue, the only resolution is to upgrade to a RTX 4000 series, or later GPU. I am 2 gen behind, I am holding off upgrading my PC until the RTX 5000 series
• Movie Studio

  46 answers, most recent on 4/10/2025

  RE: Stereo not supported - burning disc
  Thank you for the tip. Yes I do burn quite a lot, mostly home videos but there is a good deal of higher quality footage I dabble in, hence buying a new computer that is upto day and much large power needs. In hindsight if I had known this I would
• Movie Studio

  11 answers, most recent on 1/20/2026

  RE: VDL 2026 Patch 316 - Had to deactivate then reactivate the same PC
  @johnebaker do you have both activation slots used, and/or recent updates/upgrades to Windows? John, yes, one for my desktop and one for my laptop. The update on my desktop threw up the error. There was a Windows update at the same time. Will check
• Movie Studio

  11 answers, most recent on 1/20/2026

  RE: VDL 2026 Patch 316 - Had to deactivate then reactivate the same PC
  @emmrecs Hi Jeff I have both VPX and VDL on my laptop and PC, and this is not the first time I have been asked to de-activate/reactivate by a patch, which may have been triggered by the update to Win 25H2. I suspect that significant Windows updates
• Movie Studio

  31 answers, most recent on 4/16/2026

  RE: Video deluxe 2026
  @ImTerribleAtThis   Hi   I have been looking at the issue with the LUTs not appearing in the Templates tab with a 'clean' install of VDL, ie not an upgrade from an existing installed version. The easiest to setup and use for the LUTs, is the folder
• SOUND FORGE

  10 answers, most recent on 2/17/2025

  RE: Can SF 7 be uninstalled and reinstalled?
  rraud, thanks for getting back. I bought SF-5 in 2004. It came with an installation disc that asked for the SN, which was included. I *think* I registered that online as well with no problem. Not sure anymore. Some time later, I contacted Sony
• Video Pro X

  165 answers, most recent on 4/10/2025

  RE: [Closed] Website Observation
  @Can-Dive Having normally both programs is why I often upgrade MMS more frequently than VPX as any additional extras are also ported across to VPX and often also across to Vegas. If they aren't I still have them on MMS. Also if there is a annoying
• Movie Studio

  18 answers, most recent on 2/13/2025

  RE: Magix Restructuring Update
  I had an Adobe AE sub for two yrs. I used MMS to make my videos & VP18/19 as an fxs editor to work with plugins like Mocha Pro for masking (Witness protection - faces & number plates), VP18/19/20 were lets say a bit 'grumpy' with Mocha Pro
• Off topic

  163 answers, most recent on 6/12/2026

  RE: Magix support has not responded to support tickets for months
  @Frank-Pietrantoni9884 Hi Frank, We're off-topic here, but: In your first post, you mentioned that it was your "desire to upgrade to Vegas Pro 23" which, I presume, you are already using a version of Vegas. If it's Vegas 22, then you have the EULA
• Movie Studio

  6 answers, most recent on 6/26/2024

  RE: Edit/playback screen lags / freezes during playback
  @Bill-the-repair-guy Hi, you'll have to let us know how it goes, RX580 cards are 8GB so if you have a 16GB it must be a Chinese upgrade from what I have briefly read, this is one of those pages -
• Off topic

  4 answers, most recent on 8/27/2024

  RE: my software
  I ALREADY HAVE MOVIE STUDIO 2025, AND I DO NOT NEED 2 UPGRADES, CAN I JUST GET A REFUND FOR 1 OF THEM...THANKS  
• SOUND FORGE

  4 answers, most recent on 2/17/2025

  RE: Upgrade Question
  Ok, but is that a yes? I can buy 18 and use it to load a version on my desktop that has none and my laptop that has 16? I don't make any subscription payments so I'm guessing I have a perpetual license? Does the desktop need to have 16 installed too
• Movie Studio

  27 answers, most recent on 2/27/2025

  RE: Neat Video - Version 6.0
  @johnebaker @me_again Hi John. So definitely a Magix problem then. I would be happy to upgrade next time around if they just fixed all the bugs instead of trying to produce something new. To date VPX12 was the smoothest bug free running version of
• Video Pro X

  6 answers, most recent on 10/9/2024

  RE: replay video clips in project mode
  Hi CubeAce, My laptop have the following : - Intel i7-8750H processor - GeForce CTX 1060 Should I upgrade my graphics card? Thanks, Cliff
• SOUND FORGE

  10 answers, most recent on 1/3/2025

  RE: Why can't I find a FULL list of plugins included with SF Pro 18 Suite?
  Thanks, that was helpful. Yeah, I was thinking it might be worth it just for the SpectraLayers upgrade. Unfortunately, the link you provided does not have the full list of plugins. Even under the headings "ADDITIONAL THIRD-PARTY PLUGINS" and
• Photostory

  2 answers, most recent on 12/23/2024

  Magix photostorey delux 2014 unable to re-install
  I have photostorey delux version 12.0.3.90 (UDC2) installed Windows 10 pro but unable to register or activate after installing on upgraded disk to Windows 11 in the same computer. Any suggestions Siraj Shah  
• Movie Studio

  11 answers, most recent on 11/8/2024

  RE: Lost transitions when Upgrading from 2019 Premium to 2025 Plus.
  @elModo7 Hi, Thanks👍 for your feedback. You have upgraded your VDL 2019 premium to MMS 2025 Suite. Good luck with compiling your films. Best wishes,Rob
• Music Maker

  4 answers, most recent on 11/19/2024

  RE: musi maker 2015 no more export facility at all
  @henryebdon Hi . . . . now i have no expoprt facilities at all . . . . What changed on the computer between working and not working, eg Windows upgrade, new computer, etc? John EBForum Moderator
• Movie Studio

  30 answers, most recent on 5/19/2023

  RE: [Solved] What can I upgrade to from Movie Studio 2022 Standard/Basic?
  So, just in order to close this topic (at least for me), I give you the answer I got from the MAGIX Support (MAGIX Sales Department, to be more precise).My question to the support was this:<< I have a (yet unused) license for "Movie Studio
• Movie Studio

  10 answers, most recent on 4/2/2024

  RE: Movie Studio Not Same as Vegas Studio?
  I noticed with the new 'upgrade' to Movie Studio 2024 it mentions that the entire interface has changed (again), so I am a bit sceptical about upgrading now, especially since I had to go through a massive learning curve to get used to Movie Studio
• Movie Studio

  One answer, on 6/1/2025

  [Closed] Movie Studio 16.0 Platinum
  I am trying to use my movie studio 16.0, but when adding a video all I get is audio, the video is a still image and will not play, I did upgrade to Windows 11, not sure if that might be the problem, but I have been using it since I bought it and
• Sequoia

  5 answers, most recent on 8/27/2025

  RE: Codemeter
  @Nicolas-Deuson All Sequoia/Samplitude staff switched to Boris FX, including the complete customer support. Technically, you're still a customer of Magix and they should definitely respond to your issue. The problem is, they have a horrible new
• SOUND FORGE

  12 answers, most recent on 9/23/2025

  RE: Sound Forge Pro 14 Multichannel FLAC Support
  I've been waiting several versions to upgrade with this simple request. Here we are with Sound Forge 18. Does this version support saving to multichannel FLAC? Previous versions can read multichannel FLAC, but can only save to multichannel WAV or