Search the MAGIX Community for tutorials, questions and solutions as well as for forum members

@AgingTechNerd Hi The Youtube video you linked to is still valid for MEP 2022, apart from the Uploader - you are better to use YT own uploader. Do note YT have specific requirements with respect to the video file header data - see here. The last

Samplitude

6 answers, most recent on 1/16/2022

Incomprehensible peaks on the record

When recording, incomprehensible peaks with very high amplitude and short sound time appear. When playing, they are not audible and are not displayed on the display. If you export this segment to a WAVE-file, the level returns to normal and there

ACID

2 answers, most recent on 1/14/2022

Beatmapper Problem - Does not save edited data in all audio files.

Hi, I have a problem with Beatmapper, specifically it doesn't save data for audio (wav) files after using it.It looks like I choose a given file - the audio track from the explorer starts after clicking on the Beatmapper file. I follow the procedure

ACID

One answer, on 1/10/2022

Noise while playing project.

Hello i am using a wave files to create music. I boat them from the Internet and they sound great. but when i put them in the work place in acid 9 there is a scrashi sound. I tried to render to wav but nothing happened. my sound card is TASCAM US

ACID

11 answers, most recent on 1/9/2022

RE: Can't record with midi

Yes i have it's recording but there is a quite noise when I am recording and I don't know what to do about it. or how to set it to go away. when serring a wave file like one shot file it's ok with no noise.

Other products

One answer, on 1/7/2022

[Closed] Vegas Pro 17 and 18

Bonjour, (English below) Mon logiciel coupait la fin de mes fichiers audio importé dans ma session ou terminait au ralenti. J'installe la mise à jour 19 et c'est pire. Ca ajoute des extraits à la fin qui ne sont pas sur la wave mais ailleurs dans la

Music Maker

5 answers, most recent on 1/7/2022

RE: MMM 2022 Premium upgrade to version 30.0.4.44 not working

I tried your suggestion but unfortunately, it only allowed MMM to switch to the ASIO output without crashing my program this time and then connect using my USB audio interface but the only sounds that would come out were clicks and pops.

SOUND FORGE

2 answers, most recent on 12/24/2021

RE: Got Sound Forge15 for $29.00. Won't take SN# till I buy again @ $49.99

@ rraud:Thank you for your reply on this issue of mine. I really appreciated that. Of course SF-15 is a prog, but it is funny that I referred to it as a plug-in. You pointed out some very interesting things to me, as you did, and I've copy-pasted

SOUND FORGE

2 answers, most recent on 12/22/2021

RE: Sound Forge Abilities

Seasons greetings @Michael-Cooling, I highly doubt Sound Forge AS or SF Pro can attenuate ambient waves/wind noise satisfactorily with any of included tools. (iZotope's RX Elements and the noise reduction pack (aka, NR-2.0) are included with Sound

SOUND FORGE

One answer, on 12/21/2021

RE: Deleting a Track

Sound Forge is a multi-channel editing application and is really not designed for multi-track recording and mixing. ProTools, Samplitude, Reaper and the free Audacty are multi-track DAW options. Vegas Pro video also has a substantial multi-track DAW

Music Maker

22 answers, most recent on 1/22/2023

RE: Cant see audio Blocks or Wave Spectrum

@linofcp007, @Mindpaint Hi . . . . . Music Maker needs to create H0 or HDP files in the Soundpool folder to be able to show the wave forms. . . . . Music Maker by default puts both a copy of the soundloop file(s) and the .H0 file(s) in

Music Maker

22 answers, most recent on 1/22/2023

RE: Cant see audio Blocks or Wave Spectrum

@linofcp007, @Mindpaint Hi . . . . . Music Maker needs to create H0 or HDP files in the Soundpool folder to be able to show the wave forms. . . . . Music Maker by default puts both a copy of the soundloop file(s) and the .H0 file(s) in

Samplitude

One answer, on 12/17/2021

VIP won't load and BAK empty

I was wondering if anyone had an idea how to recover a corrupted VIP in Samplitude Pro X6. I lost power with a session open and when I try to open the VIP, I get "Wrong file format!" (the exclamation point is to add insult to injury, I suppose). The

Movie Studio

53 answers, most recent on 11/13/2023

RE: Movie Studio 2022 cannot separate multiple audio tracks

@CubeAce Hi Ray, You are using VPX11, I am using VPX13. I can't get VPX13 to do anything different than MEP2022. Other than your way of copying, renaming the source file and importing that to get the other audio, it's easier to just do a mixdown of

Movie Studio

17 answers, most recent on 12/15/2021

RE: GoPro Footage popping between clips (or on clip transition)

@Robert-Kinney Hi Robert I ask because the waveform does not rest at 0 volts. If it is an external mic try recording with the internal mic and see if you still get the pops. I can reproduce this happening in Movie Edit Pro. So I needed to open the

Movie Studio

17 answers, most recent on 12/15/2021

RE: GoPro Footage popping between clips (or on clip transition)

@Robert-Kinney Hi Robert and welcome to the user to user forums. There are a lot of reasons for edited clips to pop and difficult to pinpoint what may be the reason without the tools to measure which it isn't the cause. The easiest and quickest way

Movie Studio

4 answers, most recent on 12/10/2021

RE: crackling audio when merging clips together

@pete-Oneill Hi Pete and welcome to the user to user forums. In the program go to File / Settings / Program and open the Playback tab. Make sure Audio playback is set to Wave driver and set to the appropriate output device. At the Audio Buffer

SOUND FORGE

No answers, created on 12/6/2021

2nd Monitor+VST= CRASH!

I connect an external monitor to my laptop via HDMI. Lots of space to run SF, nice! But if I load a VST effect, such as Waves or IKMulti- instant hang. Then, kill SF and restart it. I'm trying to use only VST3. The same file and VST combo on the

Samplitude

3 answers, most recent on 11/17/2021

how to convert a mono track into a stereo track?

Hi all :-) is it possible to turn a mono track into a stereo track? I accidentally recorded a mono track in Samplitude and would like to turn it into a stereo track. Does anybody know how? I tried the File menu -> export -> mono / stereo

Movie Studio

14 answers, most recent on 11/18/2021

RE: Need Advice! MEP vs. Vegas vs. Davinci vs. Downgrade

@jerancampy22 Hi, Losing the project files is worrisome. When you installed the new version of MEP, did you check to see if the main folder had been replaced with an empty one except for the subfolders? On my laptop, this is the location of all

SOUND FORGE

2 answers, most recent on 3/10/2022

RE: convert problem

In the batch converter's settings under 'Add Save options', choose the desired format(s), typically PCM (Wave) and select 'Custom' for the sample rate, bit depth and number of channels (I would assume you want one (1) channel "Mono". There were

Music Maker

3 answers, most recent on 11/8/2021

RE: music maker stops responding

Thank you for this. I see where I can choose to "save" the file listed new 0013 which I did. There are 3 of them, .HDP file or Magix sounds, one is HD file and the last is wave sound. None of them will open or reload into Magix. Any other thoughts?

SOUND FORGE

8 answers, most recent on 11/7/2021

RE: [Closed] Audio Studio 15.0 (build 57) won't open mp4 or mvk files

Dolby AC-3 files will not playback in Sound Forge without a AC-3 decoder. Convert the AC-3 files to PCM WAVE and use them. There are numerous online converters that convert to most formatsIf you have a multi-channel (surround) AC-3, convert it to a

Audio Cleaning Lab

6 answers, most recent on 10/25/2021

RE: when are any improvements applied when cleaning? Cleaning Lab 3

@Dave-Williams9210 Hi Dave, if I play the same section again and with the same settings the graphics have the same profile as on the original and it doesn't sound as if the track has been cleaned, which to me suggests that the first attempt at