• Music Maker

  2 answers, most recent on 7/24/2023

  missing loops?
  was wondering if there are refunds for loops I bought, all of them seem to be missing a lot of loops basically got false advertised of what I was going to get, I tried searching for the files but no luck
• SOUND FORGE

  42 answers, most recent on 5/28/2025

  RE: Batch Processor Crashing
  @ItsMeTho I'm not sure if this is a trial problem. Maybe some of your settings are leading to a crash? For the context menu, I think there should be RemoveSFContextMenus.reg and RemoveCustomContextMenu.reg files to remove Sound Forge entries from
• Movie Studio

  10 answers, most recent on 2/21/2025

  RE: Bluray playback issues
  @cocobacon Hi . . . . the encoding values that, in your experience, need to be changed at all? These are all default for the NTSB 1920x1080 setting . . . . Assuming that your are in a NTSC standard area then nothing in the default settings needs
• Rescue Your Videotapes!

  9 answers, most recent on 4/22/2025

  RE: Videowandler 2 issues...
  @Sami-Pekonmki Thank you for the additional information. Every little helps! A quick search on your camera model led to this page from the manual. I assume, from what you write, that you do not have the AV to 3 x Phono (RCA) cable that the manual
• Movie Studio

  24 answers, most recent on 1/9/2024

  RE: 'Effect Transitions Basic' are not exporting in MEP2022 or VPX14
  @browj2 Hi John. At first I thought maybe it is because it needed a fixed amount of frames but the transition time can be altered manually. At first the effect did not work in either MEP or VPX but is now working in VPX. I have no idea why. Having
• Video Pro X

  5 answers, most recent on 3/31/2024

  Deinterlacing old footage VHS Lagarith with good results possible?
  Just wondering what is ths best work load for dealing with LAGS AVI PAL 25i captured via Hauppauge usb-live2 via AmTV Rec. Normally I have been using Virtual Dub 2 and deinterlacing via double rate top field first and outputing to 50p the encoding
• Video Pro X

  2 answers, most recent on 12/9/2023

  Playback of video is stops at a certain point on timeline
  Hello, I am creating a movie and reviewing my edits. I have reached a certain point in my timeline, where I cannot get the video to get past on playback; even though there is additional video located after the stall point on the timeline. I checked
• Music Maker

  4 answers, most recent on 11/13/2023

  RE: screen resolution issue
  Hello SP, thanks for your comments. As I said in my post the program doesn't even open so it's not as if it's running slowly - it isn't running at all. JohnBaker, thanks for your message. The specs state the resolution at 1920X1080 so Speccy doesn't
• SOUND FORGE

  7 answers, most recent on 12/15/2023

  RE: Be able to save to m4a (Sound Forge 17)
  @SP. I believe you can change the extension mp4a to mp4 and so make a file playable; I'm honestly not sure the reverse is true. Jeff For me the reverse is true as well. Both are interchangeable at least when working with VLC or Studio One (my use
• Music Maker

  10 answers, most recent on 12/20/2023

  RE: Good-Bye Cruel World I'm Leaving You Today
  @3DSownz Have you tried to reset the program settings under the File > Settings menu? Do you use an external USB audio interface with its own ASIO driver? Or is your ASIO sample buffer size too small? Are your hardware drivers up-to-date? Are all
• Movie Studio

  10 answers, most recent on 2/21/2025

  RE: Bluray playback issues
  @cocobacon Hi . . . . This all happened after the upgrade to Studio 2024. The problems have occurred on 3 different bluray players, all of different brands and ages. The only way I've been able to get back to playing is to eject the disc and
• Movie Studio

  46 answers, most recent on 4/10/2025

  RE: Stereo not supported - burning disc
  @BrenyC, @CubeAce Hi Brendan, Ray Ray:- . . . . I'm wondering if this is another problem that has been caused by a high differentiation of frame rates (28 frames per second difference) . . . That is one component that can be fixed by converting all
• Movie Studio

  28 answers, most recent on 8/25/2023

  RE: new bug in MS2023 Platinum / import PNG image generate FROM MS2023
  I wonder what the difference is, I have no problems but I have an AMD CPU with no integrated graphics, I'm also on the Studio driver, I believe you lot run the Gaming driver but the OP's signature doesn't mention a graphics card? 🤷‍♂️
• Video Pro X

  46 answers, most recent on 1/16/2024

  RE: VPX15, no hardware encoding during BD burning
  Thanks for the replies. @johnebaker @AAProds @CubeAce Ok, so do we agree that this is a problem with the programming of VPX15? Or is there something I haven't thought about?  Ray, something doesn't add up here. If I do a simple export to AVCHD/m2ts,
• Video Pro X

  3 answers, most recent on 6/15/2022

  [Solved] FXhome Ignite Particles & Post FX cold not be loaded
  Hi I have just upgraded to X14 and downloaded FXhome Ignite Particles & Post FX, this came free with the upgrade. I followed the instructions and all went well until I pressed the "Apply Effect" button. Upon doing this I got a warning telling me
• Other products

  3 answers, most recent on 6/3/2022

  [Solved] Purchased a full track with commercial license
  I purchased a commercial license from the store for a track called easier said than done, downloaded both .wav and .ogg, but whichever I use to record, the track is far too distorted, so was wondering if it would be possible to get the actual stems,
• SOUND FORGE

  2 answers, most recent on 3/25/2022

  [Solved] Activation
  I use Soundforge 12 Pro and was wondering if I could get 1 more activation so that my wife can use it on her laptop. As I presently only have 2 activations for my account, I travel and don't ever use my desktop computer and my laptop at the same
• Music Maker

  One answer, on 3/21/2022

  [Solved] Buying MMM 2022 Premium
  Greetings,I purchased the MMM 2022 Premium edition and I was wondering about the licensing for Stranger Synths soundloops.It says it includes "Stranger Synths Bundle (Value at 49.99)", however on ProducerPlanet my account says I only havethe
• Video Pro X

  4 answers, most recent on 6/12/2022

  [Solved] Does Video Pro X13 still include the Mercalli stabilizer plugin(s)?
  I'm debating about upgrading Video Pro X12 to Video Pro X13, but with all of the recent changes with MEP/MS 2022 with regard to stabilizer plugins, I'm now wondering if I would end up losing some functionality if I upgraded. Does Video Pro X13
• Video Pro X

  4 answers, most recent on 3/6/2022

  [Solved] What's the maximum render resolution for Pro X 12?
  I'm looking at Pro X 12 in the Humble Bundle Creative Universe and I'm wondering what the max render resolution is. I've been using VEGAS Pro 16 for a while and it won't let me render ultra high resolutions for VR. I know Pro X 12 says it supports
• SOUND FORGE

  3 answers, most recent on 2/26/2022

  [Solved] Sound Forge Audio Studio question
  Hi, I have a new Mac running the M1 chip. Windows 11 now has a release that works on Parallels. I was able to install SFAS 14 and it worked initially. Upon updating win 11 and restarting it would not launch or run in any kind of compatibility mode.
• SOUND FORGE

  5 answers, most recent on 2/12/2022

  [Solved] upgrade from sound forge pro 14 to sound forge pro suite 15
  Hi there, I am an owner of Sound Forge Pro 14 and I'm looking to upgrade to Sound Forge Pro 15. I just saw that there is a Sound Forge Pro SUITE 15 and was wondering if I would either have to purchase that as a New package, or can I upgrade to that
• ACID

  3 answers, most recent on 1/30/2023

  [Solved] Media Manager in Acid Pro 10?
  Hi, Im evaluating the Acid Pro 10 product via demo before I purchase, and I am wondering if there is a better way to naviagte loops, other than the Explorer, and manually navigating thru a ton of sub folders.   In the support documentation, I see
• ACID

  13 answers, most recent on 1/1/2022

  [Solved] Where is the Tempo (BPM) stored in an MP3 file?
  I've been using Acid since 2000, but I use it strictly for creating multi-track DJ mixes of existing tracks (I don't produce any original music)... so I only use mp3 since it's the universal format to acquire tracks. I know Acid stores the Beatmap