Search the MAGIX Community for tutorials, questions and solutions as well as for forum members

Hi I would suspect that you have some stray clips that you may not see when playing back in the preview window, especially if they are near a transition. You need to locate each section of the timeline where thay appear and zoom in at that

Photostory

One answer, on 12/5/2013

RE: Burned DVD is not playing on DVD player (disk error) neither on PC.

Hi Assuming this was a standard DVD burn that completed OK with no errors reported then the most common cause of . . . . Burned DVD is not playing on DVD player (disk error) neither on PC. . . . . is the quality of the discs used. Cheap

Photostory

4 answers, most recent on 11/13/2013

RE: Problem playing Photo Story 2014 Delux burned DVD

When I burn my project to DVD-R disc and if I select "Blue Ray", the completed DVD disc will not play in my Blue Ray Player (which is the current Panasonic model with the latest "firmware" installed). Should I be using a different type of disc to

Video Pro X

5 answers, most recent on 11/4/2013

RE: Blu ray playback

Hi @ Ralph_S . . . . Magix, are you "listening"? . . . - this is a user forum not Magix support. As Jeff has said, MEP is very capable at burning BD and DVD discs. Without knowing the specifics of the disc make and type you are

Movie Studio

One answer, on 11/3/2013

RE: Getting program onto computer

Hi, Try to find somebody having a USB external DVD drive it is just plug and use the external drive, you need a DVD writer or B-R writer to burn you movie. May be the best and fastest way to install and use the program. Also you can try to copy

Movie Studio

6 answers, most recent on 10/3/2013

RE: Movie Edit Pro 2014 Bluray

Hi, This is a normal rule to output with the same frame rate than recorded. Try to output a 5minutes video in B-R on a single DVD disk using a part of your original video recorded in 1920 x 1080 and 29,97 f/s output on DVD but B-R file. Probably

Movie Studio

10 answers, most recent on 12/6/2018

RE: Problem Burning DVD

Hi . . . . I have had a few aborted attempts using the same disc . . . . That is the cause of the Encode All etc message you are getting - the movie has already been rendered and the DVD structure set up. The next stage, which is where your

Movie Studio

10 answers, most recent on 9/19/2013

RE: Project length / Disc capacity issue

Hi Richard Can you post the following screenshots: - the project settings. - the full timeline. - the Burn dialog with the Advanced button window open. Also what brand an type of discs are you using? A tip

Movie Studio

10 answers, most recent on 9/19/2013

RE: Project length / Disc capacity issue

Hi Richard Can you post the following screenshots: - the project settings. - the full timeline. - the Burn dialog with the Advanced button window open. Also what brand an type of discs are you using? A tip - get hold of

Movie Studio

One answer, on 7/14/2013

RE: MEP 17 animated menu problem

Hi Does the problem occur with all the animated menus or is it a specific one? For initial burns I use rewriteable discs either DVD-RW or BD-RE depending on whether I am creating DVD or BD discs. Often I need to go back and make an edit or

Movie Studio

3 answers, most recent on 7/10/2013

RE: AVCHD and Blu Raydiscs made with MEP16 won't play on Panasonic DMP BDT210 player. Help!

Hi . . . . Thanks for your reply. I tried burning an AVCHD disc using Roxio Creator MyDVD software and that disc plays fine. So the issue is that MEP16 burns the disc somehow differently than MyDVD does. The problem is that I love MEP16 for

Photostory

One answer, on 7/10/2013

Magix slideshow maker 2

The DVD discs produced on this programme will not play on DVD players , but will only [play on PC or Laptop. I am selecting DVD in the Burn to Disc setup. Can anybody help pleaase. Discs used are DVD-R

Movie Studio

3 answers, most recent on 7/10/2013

AVCHD and Blu Raydiscs made with MEP16 won't play on Panasonic DMP BDT210 player. Help!

When I burned a movie in ACVHD format (on a DVD-R blank) only the audio plays (no video) on my Panasonic DMP BDT210 player. This same disc plays fine on my computer with Roxio CinePlayer. And a burn of this same movie as a BD (BluRay) disc won't

Movie Studio

9 answers, most recent on 7/7/2013

RE: How to insert title screens between sections?

Hi . . . . I was being sarcastic, John. . . . I thouht you were hence the On a more sreious note See this post (if you have not already done so) for the DVD structure. As an example, here is an image showing titles in

Movie Studio

9 answers, most recent on 7/7/2013

RE: How to insert title screens between sections?

Hi . . . . I was being sarcastic, John. . . . I thouht you were hence the On a more sreious note See this post (if you have not already done so) for the DVD structure. As an example, here is an image showing titles in

Movie Studio

9 answers, most recent on 7/7/2013

RE: How to insert title screens between sections?

Hi . . . . I was being sarcastic, John. . . . I thouht you were hence the On a more sreious note See this post (if you have not already done so) for the DVD structure. As an example, here is an image showing titles in between some

Movie Studio

3 answers, most recent on 7/7/2013

RE: Finalize DVD-R using MEP 2013 Plus

Thanks for the quick response John! I did burn the DVD-R using the MEP burn wizard. So I'm good there. Plus...when I closed out and restarted the duplication software app, this time it took. I sent both the video _ts folder AND the config

Movie Studio

3 answers, most recent on 7/7/2013

RE: Finalize DVD-R using MEP 2013 Plus

Hi You do not need to finalize the disc if you burn DVD using the MEP Burn wizard. If you are just copying the mp2 movie to a DVD-R disc then you are not creating a DVD with the proper structure, and finalising will make no difference if the

Movie Studio

3 answers, most recent on 7/7/2013

Finalize DVD-R using MEP 2013 Plus

What are the necessary steps to ensure my DVD-R is finalized? This is a recorded (MP2) movie burned to a DVD-R which plays fine in a couple of my DVD players as well as a PC computer. But, I'm trying to upload it into duplication software

Off topic

2 answers, most recent on 6/24/2013

RE: Magix Rescue your VHS video tapes

Hi, Better for you to use a USB key since prices drop you can use 4 GIG 8 and 16 gig to place your movies on. Near all HD TV have and input USB just insert the key and probably automatic detection, follow instruction on the screen. Read the TV

Movie Studio

6 answers, most recent on 6/22/2013

RE: Best way to save my .mts file (1080p with DD 5.1 sound) to DVD-disk with retained 5.1 audio

thanks "emmrecs" for the answer. So if i don´t have a 5.1 sound card, i can never get the DD 5.1 audio trough to a disk in anyway, or?? Is the 5.1 signal "destroyd" with the downmixing?? or could i somehow be able to export it? you said that

Movie Studio

6 answers, most recent on 6/22/2013

Best way to save my .mts file (1080p with DD 5.1 sound) to DVD-disk with retained 5.1 audio

hello. i´m a newbee to this softw (Movie Edit Pro MX 18PLUS). so i have a lot of Q,s. but for now one in particular. i have files in .mts format from a panasonic Full HD cam with DD 5.1 audio. what i want to do is to save the video to DVD-disk

Off topic

One answer, on 6/18/2013

RE: Problem with burning DVD Video deluxe 16

I'm sorry, pasted only a portion of the log, here's the record: 2013-06-18 21:19:48.873: DLLAV32.DLL loaded, all entry points available 2013-06-18 21:19:48.888: AVSDK MsgCbFunc registered 2013-06-18 21:19:48.904: AVSDK: StatCbFunc

Off topic

One answer, on 6/18/2013

Problem with burning DVD Video deluxe 16

hello, I have a problem with the recording project on DVD, this message pops up: "Error code" and write the log: 2011-07-29 17:34:09.205: DLLAV32.DLL loaded, all entry points available 2011-07-29 17:34:09.205: AVSDK MsgCbFunc