• Movie Studio

  One answer, on 7/20/2023

  RE: Audio Sync Issues When Using the Speed Video Effect
  The program I am using is Movie Edit Pro 2016. This has been my first time editing a larger project and I've noticed considerable lag after multiple uses of the Speed video effect. It wasn't so much of a problem in the beginning but after a segment
• Movie Studio

  23 answers, most recent on 4/11/2024

  RE: MEP Premium 2022 - sync with wav file
  @emmrecs, @magix_dr Hi . . . . From what you say I suspect it is not actually 48kHz but at a higher sample rate. . . . . That was also my thought, an odd bitrate, however for this to speed up I would have expected it to be a lower sample
• Movie Studio

  8 answers, most recent on 11/29/2024

  RE: Using Vegas Video Stabilization
  @Joe-Berg Hi . . . . when I do a run with Zoom on, the quality of the result is very bad, can't use it. . . . . If you are viewing at a resolution higher than the original, eg if the project setting is FullHD1920x1080 and the original video clip is
• Video Pro X

  58 answers, most recent on 9/12/2024

  RE: [Closed] VPX/MMS update schedule
  @CubeAce Hi, Yes I do like to play with effects but a lot of those listed come into play with just general editing, I haven't listed any problems have I? I've listed features that are in most other editors but not MMS. I'd like to know which of that
• Movie Studio

  19 answers, most recent on 6/24/2024

  RE: Saving videos question (Saving YouTube vids to PC for later)
  @Eric-Elliott Eric, of course. Just export them in MPEG-4 format. I think this was mentioned before, but just pick the bitrate that will give you the largest file size you can stand to upload. For example, you have a 1920x1080 video that is 10
• Movie Studio

  2 answers, most recent on 7/18/2023

  RE: Flip the video in the opposite direction. How?
  @Former user Hi The option you are looking for is the Reverse checkbox in the Effects tab, Video effects, Speed effect. HTH John EBForum Moderator
• Video Pro X

  12 answers, most recent on 3/12/2024

  RE: VPX14 cannot output edited video at the same frame rate as the source
  Yes, I normally use AVC or HEVC codec output and could do so at 60 fps, but that requires some dropped frames along the stream, does it not, so as not to change the overall motion speed in the video over a given time sequence? Thanks for the tip
• Video Pro X

  58 answers, most recent on 1/21/2024

  RE: Poor result on still image travelling
  By doubling the frame rate all is indeed smoother and my pan becomes acceptable at the speed I want. The picture is in JPG format.Mediainfo are: Complete name                            : E:\Italie
• Movie Studio

  62 answers, most recent on 5/4/2024

  RE: System hardware not being utilized
  @Reyfox @AAProds @Former user @Daxton-Eakins @johnebaker I think as well as clock speeds, amount of ROPS, generation of ram, cache sizes etc, the one thing that tends to get overlooked is the parallel processing involved. Both in CPUs and GPUs. The
• Video Pro X

  26 answers, most recent on 9/14/2023

  RE: Import issues
  @AAProds Hi Al. @bvolbeda wants to preview the files in the preview monitor. That requires a certain read speed. Just as it's not really possible to use One Drive from the cloud to do this a slow data transfer from something like an SD card / thumb
• Movie Studio

  12 answers, most recent on 5/26/2023

  Mixdown Speed Much Better with Magix Screen Maximised
  I recall a post of some time ago about mixdown speeds for a DV project that were around 30% faster when the Magix screen was minimised. I tried it a couple of times on my old system and did find that minimising the screen did seem to speed the
• Video Pro X

  26 answers, most recent on 9/14/2023

  RE: Import issues
  @bvolbeda Hi. The read speed of 130MBs a second is extremely slow for an external drive. Normally I would expect around 625 MB/s from an external SATA drive or faster from an external SSD. Is it a thumb drive or a memory stick of some kind? In which
• Movie Studio

  17 answers, most recent on 9/4/2023

  RE: Export movie in a slower/faster speed or adjust playback speed?
  @browj2 Hi John . . . . In VPX, selecting all and applying a speed adjustment only modified the objects on track 1 (and audio on track 2) . . . Works fine on any track combination for me in VPX 15 including this one. John EB
• Movie Studio

  15 answers, most recent on 5/15/2023

  Neat Video-Best System Components CPU and GPU
  Gday all, I'm about to pull the trigger on a new system. I am doing an increasing amount of VHS work which entails use of Neat Video and am suffering very slow encoding speeds with my old i5, in the order of 12% speed for 768x576 H264. For those who
• Video Pro X

  2 answers, most recent on 6/5/2023

  RE: Speed film beyond 4x...I need in the range of 10x
  @jack-scurlock Hi, How to do it in Magix. Just a reminder, Magix is a company, not a product. I presume that you mean Video Pro X. Further to what Al said, I just ungroup/remove the audio from the video and use the Object Stretch command (shortcut 0
• Movie Studio

  8 answers, most recent on 10/17/2023

  RE: How to render with custom frame rate
  @LoganTMT @CubeAce Well, there's certainly something crazy going on here (Magix MMS 2024). I set the movie settings frame rate to 59.67.and imported a 59.94 file. I tried to export to MPEG 4 (H264)at 59.67 and it ended up being twice as long,
• Movie Studio

  10 answers, most recent on 8/11/2024

  RE: Timecode + Speed
  @AAProds, Thanks for making the demo. At one point in testing, I did add a black jpg file in between (which I saw mentioned in another forum post), and added black chroma key to the time code track, and made the black semi transparent, lined that up
• Video Pro X

  38 answers, most recent on 9/7/2023

  RE: H264 Export Frame Rate of 16.67 Possible?
  @ericlnz Thanks Eric, I haven't tackled sound yet but I think I'm going to have to adjust the speed for the video so I will be able make the sound "sound normal". 😉 @browj2 Thanks John, I've since received my latest gadget, a 2" 16mm projector lens
• Video Pro X

  34 answers, most recent on 2/18/2024

  RE: NVIDIA 4070 issues on most basic video editing work
  @MME007 Hi Marc. Just because the cameras are older than newer models doesn't make them worse. Sony sensors have always been among the best around. My Nikon cameras have Sony sensors in them. Not designed by Sony but manufactured by them. Just
• Movie Studio

  27 answers, most recent on 9/19/2023

  RE: "smart resample" + copying individual frame equivalent to movie plat?
  @Not-Applicable Hi. 1: Show the frame you want in the editor window, you can use the scroll wheel to get to the exact frame you want and 'Save as jpeg'. 2: The program may have trouble with non standard frame rates but right clicking any clip when
• Movie Studio

  51 answers, most recent on 1/30/2024

  RE: Dual Layer DVDs - atrocious luck or is just my project
  @mark-perry Hi Thanks for the disc info - the discs you have the media ID code I was expecting to see. From experience I have had serious reliability issues with them, so bad I switched Verbatim and Ritek DVD-R printable face discs, both single and
• Movie Studio

  10 answers, most recent on 7/6/2023

  Encoding Speed Dropoff-MMS 2023
  Just noticed my MMS 2023 encoding speed has dropped off. On Ray's test project, I'm now clocking 9 minutes, when my initial test was 5min or so. On Ray's test, my GPU 3060 never gets above 35%, when I'm sure it was flogging itself at 100% (in the
• Video Pro X

  15 answers, most recent on 2/15/2025

  RE: New Blue Titler Pro 7 refuses to start.
  @Gid @johnebaker @Reyfox @browj2 Hi guys. I really appreciate the efforts you have all gone to and tried all recommendations. To cut a long story short and save uploading lot of jpgs and a few short videos I made. I have tried everything suggested
• Movie Studio

  13 answers, most recent on 9/13/2025

  RE: Wich graphic card is better for Chroma Key effect ?
  @dan_lachance Hi . . . . M-Audio interface . . . . Try unplugging this and play back the project to see if it 'freezes at all. . . . . I often heard that there is a problem with the SSD drives : when you erase data, it re-writes always on the same