• Movie Studio

  41 answers, most recent on 6/20/2023

  RE: VHS made into DVD
  @Bigangbo Bigango, welcome back and sorry to hear of your troubles. This is a big call. Get guarantee a good VHS transfer/capture, you would be looking at a SVHS VCR, around 300EUR, depending on where you are living. Then, you'll need a digitiser
• SOUND FORGE

  12 answers, most recent on 12/17/2023

  RE: Sound from browser stops when starting Sound Forge Audio 16 on W11
  Thanks for the ideas. I have made some progress but am not there yet. No time today to do more work and same tomorrow. I have been able to record using VB-Cable, but cannot hear what is recorded at the same time. That means it is impossible to
• Movie Studio

  10 answers, most recent on 3/22/2024

  RE: How to make ''Movie Studio 2024 Platinum'' less Visually-Painful??!?
  @Apollo89x Hi I have compared your screenshots to mine, and they are to all intents and purposes identical, I did have to change two Windows theme settings to get the pane top bars to be purple when selected. As the screen shot is captured
• Movie Studio

  23 answers, most recent on 9/28/2024

  RE: Movie Pro 2025 Freezes
  @Lisa-Walter Hi, there's a couple of other reasons that may cause a crash but your PC should be more than capable of exporting your project, If it's a laptop check it's not overheating, the fans on laptops can draw in dust from fabric such as
• Video Easy

  6 answers, most recent on 9/9/2023

  RE: Misleading "DV Processing" Claim?
  @AAProds I think for DV you need a FireWire input on your computer. But this connection is so old that computers no longer include it. If I remember it correctly my old laptop from 2006 and had a FireWire input. Not sure if there are any DV capture
• Movie Studio

  23 answers, most recent on 9/28/2024

  RE: Movie Pro 2025 Freezes
  @Lisa-Walter Hi, there's a couple of other reasons that may cause a crash but your PC should be more than capable of exporting your project, If it's a laptop check it's not overheating, the fans on laptops can draw in dust from fabric such as
• Movie Studio

  7 answers, most recent on 2/1/2025

  RE: Upon exporting all of my ZOOMS are black on playback
  @FF22 Hi, I just tried this in 20+ different ways I could think of without problems, your instructions aren't clear so can you be more specific without 'whatever' being mentioned. Camera zoom/pan & Section are two different effects? Camera
• Movie Studio

  14 answers, most recent on 12/11/2023

  RE: creating panoramas
  Thank Cube Ace I want to use all six photos of my living room so I can pan it from left to right in its entirety. I am enclosing all the steps I have taken but the result is only one photo in spite of having selected all six . I also have installed
• Video Easy

  21 answers, most recent on 6/7/2024

  RE: Video Easy no longer recording audio in stereo
  @Eric-Elliott @CubeAce Hold your horses, Video Easy has NOT been discontinued; it is the software component of Rescue Your Videotapes or Video Saver, whatever the Magix analogue capture package is called today. VideoEasy is currently running at
• Video Pro X

  5 answers, most recent on 3/31/2024

  Deinterlacing old footage VHS Lagarith with good results possible?
  Just wondering what is ths best work load for dealing with LAGS AVI PAL 25i captured via Hauppauge usb-live2 via AmTV Rec. Normally I have been using Virtual Dub 2 and deinterlacing via double rate top field first and outputing to 50p the encoding
• Movie Studio

  17 answers, most recent on 7/30/2023

  RE: Video zoom function unusable
  @DuneElliot I've had a good play with MEP 2021 and MMS 2023 and I don't see any difference in functionality. Unfortunately, I think the clue to what's happening at your end may lie off screen below your video. If you can capture more of the screen
• Video Pro X

  2 answers, most recent on 11/13/2023

  RE: Evaluating X15 trial - severe limitations
  @sonic_assassin Hi . . . . Its screen capture seems not to like my Win10 sound card . . . . Ensure the Stereo mixer is enabled in the Windows Sound settings, then select this as the recording source in VPX 15 - I would also suggest you turn off all
• Music Maker

  2 answers, most recent on 6/3/2026

  Loops Unlimited Not Syncing to Music Maker
  I recently purchased a monthly subscription to Loops Unlimited. The service was not syncing to Music Maker completely. After a lot of different attempts at fixing it, I unsubscribed. However, Magix claims I can use the service with full
• Video Pro X

  29 answers, most recent on 12/14/2023

  RE: Video showing black in timeline and on export
  @Lillian-Fidler, @Former user HI The long GOP is unusual at a value of 250, and would account for the low bitrate of the video. It has been highly compressed. The long GOP value of 250 does not make for good editing, and equates to 10 seconds of
• Video Easy

  21 answers, most recent on 6/7/2024

  RE: Video Easy no longer recording audio in stereo
  This is why I have such a hard time using forums. I'm more confused now then when I started. I know you are all trying to help and I appreciate it, but it is starting to get messy for me as what always happens in forums. I think my plan is to go
• Other products

  One answer, on 1/30/2023

  [Closed] VEGAS capture did not screen capture the Generic PnP Monitor
  I tried to screen capture the Generic PnP Monitor in Vegas Capture but it does not work. Nothing has been captured. The capture file has 0 kb. It seems the capture file is corrupted and unusable. Processor    AMD Ryzen 7 5700U with Radeon Graphics  
• Rescue Your Videotapes!

  20 answers, most recent on 9/9/2023

  RE: Driver besides the default Win 11 (messed)
  OK - this will be a long post - first things first - whatever I tried with instructions based on the link posted above, didn't work - I even tried on 2 other machines without success - I have the screenshots and will send them on request with the
• Video Pro X

  5 answers, most recent on 2/1/2024

  RE: VPX15 with long project
  @Betovalle Hi Roberto, Sorry, I left this too long. Features that I use in VPX not in MMS: Source Monitor - thus 2 monitors, Preview and Source Meters (available in the Source Monitor) - Vectorscope, Histogram, RGB Parade, Waveform monitor - you
• Movie Studio

  41 answers, most recent on 2/6/2025

  RE: How to fix or smooth de-interlaced content?
  Whist both files declare themselves as interlaced they are actually 25 fps progressive. I don't agree. Yes, the "Deinterlaced" 00059 file is deinterlaced; as Eric says, 25 fps Progressive. You can see this if you create a 50fps movie in Magix, add
• Video Easy

  6 answers, most recent on 9/9/2023

  RE: Misleading "DV Processing" Claim?
  @SP. Not sure if there are any DV capture cards today. I recently installed a cheapie from Amazon and it goes like a champion on Win 11. If you have more than a few DV tapes, it's definitely worthwhile sticking one of these in your machine.
• Movie Studio

  69 answers, most recent on 4/9/2024

  RE: VHS captures, video "washed-out"
  @AAProds @johnebaker Hi, Thanks for the info. The Roxio just packed it in again. I noticed that it's getting warm. Oops, now it's working again. I managed to get Roxio Easy VHS to DVD Plus installed and did a test. The choices are 16:9, 4:3. The
• Rescue Your Videotapes!

  18 answers, most recent on 4/1/2023

  RE: Increase recording quality?
  @Pierre_S That Export screen is similar to what we have in Movie Studio. However, the critical step is the capture or import. Is there any option to choose the capture format such as MXV? If so, use that as a test, choose user-defined and set the
• Movie Studio

  23 answers, most recent on 9/18/2023

  RE: [Closed] File size
  @CubeAce Ray, I wasn't questioning your comments re processing power; I agree with those. I was just pointing out that H264 and H265 are both a subset of "MP4", so your statement "H265 (HEVC) is more effective than MP4" isn't technically correct.
• Samplitude

  6 answers, most recent on 3/18/2024

  RE: Monitor does not work when recording wave files.
  I agree that 'What-you-hear' is indeed for recording pc audio purposes and that's precisely what I'm trying to achieve. 'Monitoring' is how one can ascertain that the recording function is working and the levels that one desires are being captured