• Movie Studio

  14 answers, most recent on 10/29/2024

  RE: MEP 2023 | 2 video files (in 1-day) have been exported with corruption
  Hello, here is the MediaInfo data for the original raw footage: GeneralComplete name                            : C:\Users\Beta\Desktop\New folder (2)\Video 12-10-2024, 14 04 56.movFormat                                   : MPEG-4Format
• Movie Studio

  51 answers, most recent on 1/30/2024

  RE: Dual Layer DVDs - atrocious luck or is just my project
  @mark-perry Because the adaption changes to fit the disc I insert the chapter 5 frames before the desired position to give me some leverage. Yes, chapter marks are not frame-accurate (I allow a half a second or so either side) but they shouldn't
• Movie Studio

  16 answers, most recent on 12/18/2023

  RE: Slow Export AVI to MPEG4 with RTX 3060
  @me_again Gday Andy, you may remember my bleating last year and earlier about "frame salad", where, with a Lagarith file on the timeline, randomly and often, you'd get a frame from somewhere else in the video popping up in the wrong place. The
• Video Pro X

  65 answers, most recent on 4/7/2024

  RE: VPX prices until April 9, 2024
  @Reyfox Hi Tony, About the Object Trimmer, the main point is that you can set the exact number of frames for fades. Can't do that in Vegas - this was discussed in a thread a while back. Same with the Edit Trimmer for transitions, you can control the
• Video Pro X

  9 answers, most recent on 1/20/2026

  RE: No output option at 100fps for 4k-100fps video
  @tom_frank HI In addition to @CubeAce comment. While higher framerates can be beneficial in playing games, after recording, the editing and exporting is going to degrade the quantitive quality of the video, irrespective of the framerate. Obviously a
• Video Pro X

  31 answers, most recent on 8/28/2024

  RE: Selecting Movie Settings with VP X16
  @rickduley Rick, a few points/Qs: -Set your movie settings to SD. If it's widescreen, pick the "16:9" preset. Ensure you've got 25 set in the frame rate. -Is this with the new burner I think you acquired? -Try burning to ISO: on the "Burner"
• Video Pro X

  2 answers, most recent on 11/19/2024

  RE: perception in VPX (trial) in relation to MMS
  @Betovalle Hi Comparing full version to full version - I get no perceived difference when comparing like for like effects, editing etc. IMHO where VPX excels and gives a better 'feel' during editing is having both the Source and Program preview
• Video Pro X

  31 answers, most recent on 1/19/2024

  RE: Video Pro X12 - Newblue Elements not working/registered?
  @Former user Hi Gid. You can expand the key frames visible for any effect buy clicking on the little white arrow to the left of the ticked box. The effect seems to be sharing parameters with Size. Position, Rotation. If you open SPR and expand the
• Movie Studio

  3 answers, most recent on 10/29/2025

  Hardware acceleration affected by motherboard?
  Recently I had to replace a faulty ASUS Z490-P motherboard with a Gigabyte H510M board, having chosen the latter due to its compatibility with my existing RAM and CPU. I had a NVidia 1660Ti GPU in the original build, which I transferred to the new
• Movie Studio

  47 answers, most recent on 8/24/2025

  RE: "Takes" functionality
  Hi all, Small additional points: When I start creating the takes from all of the old material, they automatically show up in the standard Takes map. In the next step, when I trim and/or add effects to the take on the timeline, VDL automatically
• Video Pro X

  12 answers, most recent on 3/12/2024

  RE: VPX14 cannot output edited video at the same frame rate as the source
  @tom_frank Hi While it may be advantageous to export at a higher framerates than 60 fps, there is the 'rock and a hard place' I briefly mentioned which 'puts a spanner in the works' and is normally rarely talked about . In order to avoid drop
• Video Pro X

  29 answers, most recent on 12/14/2023

  RE: Video showing black in timeline and on export
  @Lillian-Fidler, @Former user HI The long GOP is unusual at a value of 250, and would account for the low bitrate of the video. It has been highly compressed. The long GOP value of 250 does not make for good editing, and equates to 10 seconds of
• Movie Studio

  6 answers, most recent on 12/1/2023

  RE: Audio sync
  @Leroy-Johnson Hi. This happens a lot to files recorded with a variable frame rate. Such as from game play recordings or some smartphones / cameras capable of recording in H265 (HEVC). Either set the camera / screen recorder to record at a constant
• Movie Studio

  16 answers, most recent on 8/20/2025

  RE: Unable to install proDAD VitaScene V5 PRO in Video Deluxe 2026 Premium
  Hello, good morning and thank you for answering. I watched the video, and those transitions or effects are in the "Effects" tab, which, as I mentioned, I do have active. However, if you click on the transitions tab, only one appears. These are the
• Movie Studio

  32 answers, most recent on 7/29/2024

  RE: Deinterlacing-How does Magix do it?
  Master @jagabo from Videohelp has made this interlaced file for me. It shows how Magix processes interlaced files with variations to the movie frame rate and interlace settings (TFF or BFF) in the video object
• Video Pro X

  13 answers, most recent on 9/22/2024

  RE: Bug in Video Pro X 16
  Tried the above and neither worked. This is my Program settings. The right screen is Monitor 1. When I restart the program these settings are checked, but no display on Monitor 1. When I uncheck "Video output activated" and click OK it closes, then
• Movie Studio

  35 answers, most recent on 5/7/2025

  RE: Is there a way to increase the cache?
  @Steve-Jones3743 Hi and welcome to the user to user forums. I doubt it's a cache problem but may be down to not enough free space on the C: drive as a lot of space is needed to allow the temp files to be created and written to disk. Those files can
• Movie Studio

  3 answers, most recent on 1/31/2024

  need help, not what I expected after 2015 and Platinum 14.0
  I downloaded movie studio 2024 platinum but find no buttons to stop where I am (goes back to where I started) -no buttons to step through frame by frame and when I drag a file in, I only get one track of video and audio. It's nothing like 2015 or
• Movie Studio

  2 answers, most recent on 3/31/2025

  RE: MEP movement templates
  @kaywah Hi There is no need to use the movement templates. Set the image to the size you require and then keyframe the Horizontal and Vertical position options to can animate/move the image as you please. If you are not familiar with Key framing,
• Video Pro X

  34 answers, most recent on 2/18/2024

  RE: NVIDIA 4070 issues on most basic video editing work
  @MME007, @CubeAce Hi . . . . It was set to 50i, probably because it's the BlueRay format. Could 50p be a better option . . . . Yes. By convention the i, in 50i, refers to fields per second, as it takes 2 fields to make 1 frame, the actual frame rate
• Video Pro X

  15 answers, most recent on 2/2/2024

  RE: Recording from Atomos Zato has serious video/audio offset drift
  I have now made 3 additional recordings using 246 HQ, MQ & LQ and in all cases the frame rate is constant, this is a mediainfo for the 246 HQ: VideoID                          : 2Format                      : AVCFormat/Info                 :
• Movie Studio

  4 answers, most recent on 12/7/2022

  RE: [Solved] Anchoring Text to a Text Bubble
  @Marc-Bergevin Hi Marc. The Key framing is the same in both programs. It just looks slightly different. I adjust how my programs 'look' depending on what I am doing so my images don't always look the same as the basic window setup the program comes
• Movie Studio

  6 answers, most recent on 1/27/2024

  RE: Content disappears
  Expand the view and look at the clip before the one that does not show. Sometimes I will clip a frame or couple of frames off the end of a clip and then forget to delete them. And then when I try to drag a longer clip to overlap with the previous
• Video Pro X

  58 answers, most recent on 1/21/2024

  RE: Poor result on still image travelling
  @CubeAce Just wrote a long comment, pressed 'comment' & it just disappeared 😡 Thanks for the offer, maybe later, I'm busy at the mo doing nothing with something else. 😁 In the past I've exported things at a higher frame rate to get smoothness in