• ACID

  26 answers, most recent on 5/13/2023

  RE: [Closed] Acid Pro 11
  Hello @SP. It's because the grass IS greener and it gets watered and cared for unlike... As to NI, Steinberg etc. I own these products and check their forums. Virtually all those problems are user issues NOT systemic program flaws, bugs etc. and
• Movie Studio

  11 answers, most recent on 12/7/2022

  RE: Movie Studio 2023 NewBlue Essentials will not activate
  Did you try the workaround presented in this post?https://www.magix.info/us/forum/how-to-get-rid-of-diagonal-red-lines-and-fx-logo-from-produced-movie--1309700/#ca1829438
• SOUND FORGE

  11 answers, most recent on 4/20/2023

  RE: Why do you make it so difficult to get support?
  @Michael-Babbitt I shouldn't have to look up the error code, my friend. That's counterintuitive. Was there not an error code shown that you didn't indicate in your post?   Would you prefer to raise a ticket and wait for 2 or 3 days for a cut and
• Movie Studio

  2 answers, most recent on 1/22/2023

  Error message on startup
  Error with Movie Studio 2023   The problem is with this file “it is not present in windos10” C:\WINDOWS\SYSTEM32\OpenCL.dll   after I renamed the file to ZZZOpenCL.dll the program was working OK. Also Movie Studio 15 was not starting with the
• Movie Studio

  26 answers, most recent on 3/14/2023

  RE: MPEG 4 Codec
  @AAProds Hi Al. When anyone has not given system specs with their inquiry, whoever is responding should take into account that the person inquiring may still be on Windows 7, using direct X9c, have a graphics card that at present will be able to use
• Movie Studio

  4 answers, most recent on 1/28/2023

  RE: How can I fix this error: " Renew the Update Service "
  @Ertan-KOC As @CubeAce writes, these are user to user forums with no Magix staff present so there is nothing that any of us can do to change anything in the program. Unfortunately, your first post is really a rant. As such, it is not acceptable;
• Video Pro X

  148 answers, most recent on 4/18/2023

  RE: General discussion on add-ons
  @Reyfox Hi. It doesn't have to be an individual graphics plugin that will cause that amount of ram usage but a combination of smaller ones running parallel. I am currently running a two minute twenty two second 4K export that will take me a while to
• Movie Studio

  14 answers, most recent on 4/8/2024

  RE: upgrade advice - movie studio suite 2023 to movie studio suite 2024
  @spuddy13 Hi. Certainly an interesting assembly of components if I'm reading what may be missing at the edges correctly. I would say a brave choice and one that should work well. My only concerns are with using a 14th gen Intel processor, why DDR4
• Video Pro X

  3 answers, most recent on 7/24/2023

  RE: New X15 now not working aftew a day of use.
  @mouthpiece1c Sorry to hear this. However, how, exactly, did you carry out the uninstall and reinstall of the program? I ask, because it is highly likely that, unless you took care to ensure that everything connected with the original install was
• SOUND FORGE

  9 answers, most recent on 2/5/2023

  RE: voucher code not recognized
  Rraud Thank you very much for your response it's quite helpful I have yet to download the sound forge to my new computer, as I have the voucher number but not the serial number The software was a Christmas present and I'm having my friend check to
• Video Pro X

  165 answers, most recent on 4/10/2025

  RE: [Closed] Website Observation
  @Reyfox Hi Tony, A couple of things: VPX was priced much lower than everything else out there in the prosumer/pro market. The website had videos showing what it could do. Now, nothing on the website to attract a new audience. As I mentioned, on the
• Movie Studio

  85 answers, most recent on 3/3/2023

  RE: Proxy files problem | "Creation of a proxy not required"
  @Reyfox All the video editor forums who had them (not all do) I visited during my research into such programs had more complaints about crashes and bugs than here at the time. A lot still do. The then somewhat less buggy looking program with an
• Movie Studio

  15 answers, most recent on 3/24/2023

  RE: Recording Audio
  @johnebaker Hi John. I agree it sounds like a wrong input is connected that has no signal coming in and the Windows mixer volume is at maximum on the input. I am still concerned that @Bobbie-Barr has a wrong selection in the Windows options. That
• Movie Studio

  8 answers, most recent on 9/14/2024

  RE: How to process audio with audio tools
  @emmrecs Hi Jeff, Thanks for clarifying that. I missed the "a clip." So, here is my layman's definition, normalise raises the volume of the entire clip such that the loudest sound goes to 0 dB. This is just like turning up the
• Movie Studio

  51 answers, most recent on 11/17/2023

  RE: MAGIX Movie Studio 2024 Platinum problems
  @AAProds @Former user I hope AAProds has lots of Ketchup (or a range of tasty hats 😬). I have been recording things from free-to-air for ages — as MTS files. I have processed them through various MAGIX products. Sometimes I have had to revert to
• Movie Studio

  7 answers, most recent on 7/4/2024

  RE: error message
  @derek-brown Hi Derek. Then the problem is probably one of the above as described by @johnebaker. For my money I would say it is a memory problem and not a Windows problem if it is not happening all the time but that is only a guess on my part. The
• Audio Cleaning Lab

  2 answers, most recent on 6/14/2023

  RE: Finding audio 'skips' in the waveform on playback
  @Christopher-Baldwin Welcome to the Magix user to user forums. Two things occur to me as possible "reasons" for the skipping you are experiencing: Audio Cleaning Lab MX is now a very old version of the software and may not run properly under latest
• Movie Studio

  20 answers, most recent on 4/12/2023

  RE: Imported videos have no sound.
  @Sumter-Hogan Hi and welcome to the user to user forums. Before you uninstall the program you must first go to the program's help section and deactivate the program or go to your Magix account and log in and de-active the program there to make sure
• Rescue Your Videotapes!

  8 answers, most recent on 3/13/2024

  RE: Increase recording quality?
  @AAProds Hi Al. I don't know about video encoding from that perspective but my cameras are capable of recording to12 and 14 bit raw in either lossless, compressed, or uncompressed or I also have the option of 16 bit tiff as well as jpeg. I can see
• Video Pro X

  6 answers, most recent on 4/15/2023

  RE: [Closed] this company is a rip off
  @russell-daniels Hi, Which product? Why would you buy software from Dell, a computer manufacturer without checking out the site of the actual software producer? If you bought Video Pro X, then what is offered on the Dell site is version 13, but
• Video Pro X

  One answer, on 2/8/2023

  RE: [Closed] my sd card crashed and i got a new sd card but my sony is registered t
  @Adolfo-Almazan Mention of "Sony" would imply your question is about one of the Magix (not Sony) Vegas product range. Is this correct? If so, please read this pinned post and follow the advice given there. You should repost your question in this
• Movie Studio

  4 answers, most recent on 12/27/2023

  RE: Magix movie studip 2024 super slow on a killer machine
  @NielsChristian-Mohr Hi Answering your questions in reverse order: I do not have the 'Blue Puzzle template from the Simple Things pack, however several users have found a few issues with other titles having positioning, or alignment, or font
• Movie Studio

  7 answers, most recent on 11/29/2022

  HEVC - Codec activation
  Hello, I am being presented with a message that I need to purchase a codec activation code for my iPhone movie to work on. When I click shop online, it takes me to select from a set of international countries. I live in the US. How do I purchase
• Movie Studio

  2 answers, most recent on 1/22/2023

  RE: Error message on startup
  OpenCL.dll is present on my PC in the C:\Windows\System32 folderMy Movie Studio 2023 Suite (version 22.0.3.167) opens and is functional on my PC (My PC as per signature).C:\Windows\System32\OpenCL.dll File properties:‎Creation date: Friday, ‎6