• Rescue Your Videotapes!

  No answers, created on 7/22/2021

  the video is "jumping"
  I try to convert old vhs tapes, using Video saver. My old vhs tapes looks perfect when played directly from tape maschine to television via scart. But when I record them to pc, both en prewiev and as final editing, the video "jumps" or flicks...what
• Rescue Your Videotapes!

  4 answers, most recent on 8/2/2021

  USB for hardware for VHS tapes has broken
  The usb for computer for vhs tapes has broken. Can I purchase a new hardware to rescue vhs tapes for USB for computer
• Video Pro X

  11 answers, most recent on 7/12/2021

  RE: New version of Neat Video released
  @johnebaker Hi John. Oh dear, another VPX 13 problem, it seems. But, I just tested it (in 13) on some SD (720 x 576) footage, a transfer from VHS, and it worked fine! I chose an especially "bad" section - lots of noise and picture disturbance - and
• Video Pro X

  One answer, on 6/29/2021

  What has happened to the Centre Video Buttons in VPX 13?
  Like others I have tried to VPX 13 and have gone back to version 12 for the time being as it was crashing over and over and with Black Screens and very laggy output Error in module "Video_Pro_X.exe" (Load address: 0x0000000140000000) to address
• Movie Studio

  12 answers, most recent on 6/29/2021

  RE: How to close a Project?
  (1) I am sorry I disagree with your 1st comments - no offense. Almost all programs start with a blank screen. Look at the Microsoft Word; SONY Movie Studio 13; VIDBOX "Video Conversion for PC"; ROXIO Easy VHS to DVD Plus; FreeCAD for mechanical
• Video Easy

  One answer, on 6/23/2021

  Invalid recording sample rate
  I want to use Video Easy to transfer VHS recordings to my Windows 10 laptop. I can see and hear the video in the preview window when I play back but when I click on the Transfer Video to Computer" button, I get the error message below: The recording
• Movie Studio

  11 answers, most recent on 6/29/2021

  Problem with burned DVD.
  I am new to this s/w and using latest version no. 20.0.1.80 (UDP3). I created my 1st project and captured complete 1 hour video from an old VHS tape using VIDBOX hardware, with MAGIX s/w. Made no changes to the video. Burned a DVD successfully. When
• Rescue Your Videotapes!

  6 answers, most recent on 6/18/2021

  RE: Magix Video Saver from 1917 with converter ver.5 colour red
  @CG-Thornquist Hi Personally I would get the latest version of the software as you are on Windows 10 - it comes with the newest Magix USB video converter, which works fine, so long as you are not trying to capture NTSC tapes on a PAL VHS recorder
• Movie Studio

  9 answers, most recent on 6/24/2021

  RE: No scene recognition when I capture S-VHS video
  @AB-Singh Is this NORMAL for Magix Movie Edit Pro Premium Yes it is. The reason MEP can split DV-AVI is because the video has the date-time stamp embedded in it, so when you're "transferring" the data from your DV camera to your PC (via the DV-AVI
• Movie Studio

  9 answers, most recent on 6/24/2021

  No scene recognition when I capture S-VHS video
  When I capture video from a miniDV camcorder, Magix Movie Edit Pro Premium recognizes the "end of a scene" and stores video in multiple clips. (This is a time saving feature.) But when I capture a S-VHS video from a VCR, and a Hi8 video from a
• Movie Studio

  23 answers, most recent on 6/14/2021

  RE: plug-ins
  Yes, I have registered and all that. I have downloaded everything that is available to download from the CD. I am not sure what "all external content" means or where this would be downloaded from. I know that I have downloaded so far WAY more than I
• Rescue Your Videotapes!

  4 answers, most recent on 6/3/2021

  Exporting to MPEG
  My product is the Magix Video easy Video Saver, installed on a 64 bit PC running Windows 10. It was supplied in a bundle with a USB converter. I have successfully exported 3 VHS recordings to my computer as MP4 files, but for some reason another 4
• Rescue Your Videotapes!

  3 answers, most recent on 5/30/2021

  RE: VHS C tapes conversion
  @Dimitrios-Beis Hi In addition to @emmrecs comment - the VKR camera only records in mono and will output to the left channel only if you connect the white audio out to the white audio in of the USB converter, to convert this to mono on both channels
• Rescue Your Videotapes!

  3 answers, most recent on 5/30/2021

  VHS C tapes conversion
  I have a Philips VKR6875 VIDEO CAMERA and want to use this device to convert my VHSC tapes to digital on my computer. I have purchased your product Video easy rescue Your Videotapes Removed by Moderator but I am not at the moment able to make it
• Movie Studio

  25 answers, most recent on 6/8/2021

  RE: Audio / Video Out of Sync?
  @johnebaker Greetings John, true the recording is low level. I only used that as an illustration that some CFR files cause MEP to "throw a wobbly" as well as some VFR files @CubeAce I know that VBR and VFR are separate issues. What I was trying to
• Rescue Your Videotapes!

  3 answers, most recent on 5/24/2021

  'No Recording Device Found in Your System'
  Sorry but am trying to transfer my VHS tapes - my Magix 'Rescue your Videotapes' was bought in 10 years ago but not used til now. When I try to record I get the message 'No Recording Device Found in Your System'. I assumed all the software needed
• Rescue Your Videotapes!

  4 answers, most recent on 5/21/2021

  RE: Interlacing
  @Ricadonna Hi . . . . . does this mean that I should export to a non-progressive format for the clearest picture . . . . Assuming the source/captured video is interlaced - then neither are 'clearer' then the other - it all depends on the media
• Video Easy

  2 answers, most recent on 5/16/2021

  RE: Blue screen when connected to VHS tape source
  @David-Font Welcome to the Magix user to user forums. I'll start by saying I have never used Video Easy but I do a lot of transfers from analogue video tape to computer, prior to burning to DVD or exporting to a digital format. The Blue Screen, in
• Video Easy

  2 answers, most recent on 5/16/2021

  Blue screen when connected to VHS tape source
  Can anyone explain how I disable a blue screen appearing when I have connected Magix Video Easy..to my VHS player.. Previously it was a black screen, any instability cause the blue screen to appear briefly when recording.. Most annoying when
• Rescue Your Videotapes!

  No answers, created on 5/13/2021

  Empty files
  Installation followed in all steps, no problem. receiving picture and sound from the VHS to the viewer on the PC, no problem. Starting to edit, following message appears: ...My Record\Recording - 0001.mpg` is empty! What could possible be wrong?
• Movie Studio

  17 answers, most recent on 5/9/2021

  RE: ISO created, VOB file audio identified as MP3
  @mark-perry Hi Mark Thanks for the clarification - it helps clear up what the demonstration image and video were showing, I would suggest you leave the post as is, otherwise it is going to cause more confusion with what the subsequent posts were
• Movie Studio

  17 answers, most recent on 5/9/2021

  RE: ISO created, VOB file audio identified as MP3
  @mark-perry Hi From your posts - . . . . 4 Hour dual-layer DVD, source: vhs PAL tape excellent source . . . . identifies some VOBs audio . . . . MPEG4 Video h.264 (from image above) . . . . This is confusing - we are missing something in the
• Rescue Your Videotapes!

  5 answers, most recent on 5/2/2021

  RE: Video picture flickers
  Three different computers in three different locations, two different packages and two different VHS players. Unfortunately I actually think there is something wrong with your converter. Software looks very good but now I given up. Clas Ohlson is
• Movie Studio

  17 answers, most recent on 5/9/2021

  ISO created, VOB file audio identified as MP3
  intent: 4 Hour dual-layer DVD, source: vhs PAL tape excellent source some stop and go's with tiny gaps (not many say 10 about 30 sec or less) to cover clogs etc. all gaps and files grouped. no further mixing done...yet. Chapters placed